K2 Series

产品描述

The Ultimate Creative Powerhouses 4 × CFS to deliver up to 16 colors 350, 300, 260 mm cubed volumes for big or small tasks Geological Stratigraphic Model @Creality Active chamber heating and a hardened steel nozzle Powered by a sturdy build and a precise step-servo motor system K2 Series . The Community Favorite. K2 series starts at 260 × 260 × 260 mm, exceeding typical beginner-level build volumes. The K2 Plus expands this to a massive 350 × 350 × 350 mm—the largest in its price range—built for professional-level creativity. Stiff frame parts are die-cast from tough aerospace-grade aluminum alloy.¹ All-New CFS (Creality Filament System) K2 series is built for multicolor and multi-material printing. All three models can be paired with CFS for multicolor printing — 4 CFS units for up to 16 colors. The perfect partner for your printer, making filament management effortless and printing smoother. Pair CFS and CFS 2 on one printer to build your filament hub. · Auto Filament Refill, RFID Recognition · Up to 4 Units, 16-Color Printing · Ideal for multicolor printing with PLA, PETG, and more. · Up to 85°C Drying, Smart Dehumidification · Filament Remaining Management · Ideal for common filaments, especially engineering-grade and moisture-sensitive ones. *CFS and CFS 2 both feature Auto Refill, Tangle Detection, and RFID Recognition. *Using CFS and CFS 2 together is subject to firmware support. 5 step-servo motors — located in the extruder and on the X/Y/Z-axis³ — work together to take extrusion consistency and printing accuracy to the next level. Annoyed by the noise? Not K2 Series. Thanks to the step‑servo motors and dynamically balanced fans, it runs as quietly as typing on a laptop. Turbocharged by a step‑servo motor system, the printing speed can soar up to 600 mm/s.⁴ Print Time: 12 hours 12 minutes* Size: 50 × 64 × 2 mm (Per Unit) Print Time: 3 hours 10 minutes* Active chamber heating on the K2 Pro and K2 Plus maintains a stable chamber temperature (up to 60 °C), helping prevent corner warping when printing with filaments like ASA and PPA.⁵ The auxiliary cooling fans⁶ on the side of the chamber direct airflow onto the extruded filament, enhancing interlayer adhesion. Detect printing failures, such as spaghetti, and notify users to take action. Another AI camera on the nozzle to adjust nozzle flow rate in real-time, preventing under- or over-extrusion. · Waste Chute Blockage Detection Speeds up the bed leveling process by probing only where your model will be printed. Integrated. Reliable. High-Flow. Accurate filament In/Out with the built-in run-out sensor and automated magnetic cutter. All K2 models can be set up for printing after unpacking and installing the touchscreen. Users can then follow the boot-up quick guide for auto-calibrations such as leveling and fan calibration. For filtering VOCs from molten filaments. Easily reads a roll of side-mounted filament. Ethernet and dual-band Wi-Fi for reliable connection and high-speed data transfer. Perfect for managing large and multiple files. * All data is from Creality Lab. 1 . Only K2 Pro and K2 Plus are assembled with all-metal frame parts. 2 . The combo version comes with one CFS unit. Additional CFS units sold separately. 3 . K2 Plus features five step-servo motors—four for the XYZ axes and one for the extruder. K2 and K2 Pro include three step-servo motors—two for the XY axes and one for the extruder. 4 . The typical printing speed for all K2 models is 300 mm/s. K2 and K2 Pro have a maximum acceleration of 20,000 mm/s². K2 Plus accelerates at a maximum of 30,000 mm/s². Hyper Series filaments are recommended for high-speed printing. 5 . Printing with ABS, ASA, and PPS requires a chamber temperature of 60 °C. PAHT-CF requires 50 °C. 6 . K2 Plus has two auxiliary part cooling fans, while K2 and K2 Pro include one. 7 . The nozzle AI camera is available only on K2 Pro and K2 Plus models. 8 . Flow rate tested using ABS with the nozzle temperature set to 280 °C. 9 . K2 Plus features dual air filters, while K2 and K2 Pro include one. Built-in RFID reader is only available on K2 Pro and K2 Plus models. Auto filament identification requires Creality RFID filaments. K2 Pro and K2 Plus support Ethernet connectivity. Only K2 Plus supports dual-band Wi-Fi. K2 Pro and K2 Plus are equipped with 32 GB of ROM, while K2 includes 8 GB.