Dental Equipment

DRINK Water Distiller

The DRINK water distiller operates from a 220V, 50Hz supply and produces 1.5 litres of distilled water per hour with an input power of 750W. Its chamber measures φ180×200mm and the unit 290×290×390mm, with a total weight of 3.5kg, providing distilled water for dental practices.

YOU98(P) Mobile High-frequency Dental X-ray Unit

The YOU98(P) mobile high-frequency dental X-ray unit uses Korean-made circuit components with high-frequency closed-loop control, so a low battery does not degrade image quality. A Japanese Canon micro-focus tube with a 0.4mm focal spot and 12.5° anode angle gives clearer radiographs. Exposure takes about 0.4s, reducing dose and limiting the effect of hand tremor; the unit is small and light enough for single-handed exposure, has a digital display, and a full battery lasts 150 exposures. Tube voltage 70kV ±10%, tube current 2mA ±20%, total weight 1.7kg.

Full-shade Detector

The full-shade detector uses multiple algorithms and can take more than 2,000 measurements on a full charge. Its built-in rechargeable lithium battery reaches 4.2V when full with a 1500mAh capacity, charges through a TYPE-C port at DC-5V and 1A, and is rated for more than 5,000 charging cycles.

BES5L Steam Sterilizer

The BES5L is a small-capacity Class B steam sterilizer with a 5 L chamber measuring 192 x 96 x 300 mm and overall dimensions of 510 x 310 x 330 mm. Rated supply is AC 220 V/50 Hz with 1,800 VA input power, design pressure -0.1/0.3 MPa and design temperature 140 °C. The temperature selection range is 121/134 °C with 0.1 °C display resolution and 1 kPa pressure display resolution; the water tank holds 1 L, maximum water consumption per cycle is 200 mL, net weight is 26 kg against 30 kg gross, and maximum vacuum reaches -92 kPa or lower.

DG-CL Series Ultrasonic Cleaner (DG-CL32/CL65/CL100)

The DG-CL series ultrasonic cleaners handle ultrasonic cleaning, emulsifying, mixing, extraction, dispersion and degassing, and come in 3.2 L, 6.5 L and 10 L tank sizes. Ultrasonic frequency is 40 kHz with switchable dual power levels (60 W/120 W, 98 W/180 W and 120 W/240 W), heating power is 100 W to 200 W under digital control, temperature is adjustable from ambient to 80 °C, and the timer is digitally set from 1 to 30 minutes. The tank is SUS304 stainless steel and a stainless steel cleaning basket is supplied; the control panel uses a 20-degree inclined human-touch design and a degassing function prevents oxidation of the items being cleaned.

BND-X2 Plus 21.5-Inch Widescreen HD Dental Intraoral Camera System

The BND-X2 Plus upgrades the operatory with an ultra-thin 21.5-inch widescreen monitor, a 1/4-inch HD CMOS sensor with 5-50 mm macro focusing depth, dual photo/video recording, 32GB USB expansion and versatile VGA/HDMI ports. The handle carries 5 buttons: freeze/record, 1/4 screen split, page up/QR code, browse and delete. One-touch QR code generation lets patients view intraoral images directly on their phones.

US980 Intraoral Sensor

The US980 intraoral sensor uses a CMOS chip with an industrial-grade microfiber panel, high-resolution X-ray conversion and advanced AD guidance to reproduce true tooth images, so even fine apical bifurcations are easy to find. The cable is replaceable, the sensor can be soaked in disinfectant to IPX7, helping avoid cross-infection, and it works with almost every brand of X-ray unit on the market. Chip type CMOS APS, GOS scintillator, 27.5×38.5mm body, 22.5×30mm active area, 18.5μm pixels and 1.9M (1600×1200) image pixels.

WODO A1/A2 (Magpie) Dental Unit

The WODO A1/A2 corresponds to the Magpie dental unit on the site, positioned as a basic dental chair that is described as simple but not simplistic: it concentrates on the core, high-frequency needs of the customer and removes complex functions so that the basic functions stay stable, excellent and adaptable. The exterior is streamlined with abundant rounded elements, and the side panels are shaped like a bird, blending natural forms with modern industrial design. Stability is the theme: a two-joint rotating assistant control mechanism is provided for four-handed clinical work, and the balanced arm and instrument tray pivot points are aligned with the centre of gravity of the chair frame to strengthen stability and independence. The self-developed operating light adjusts continuously from 3,000 to 50,000 lux at 4,000 to 5,700 K, can switch between white and warm light, offers both manual and sensor control, and has a removable handle for separate sterilization. A 12-key classic control panel and a two-pedal foot switch complete the unit.

DGL Series B Steam Sterilizer (35 litres)

DGF-M Stainless Steel Sealing Machine

This sealing machine is designed specifically for sealing sterilization pouches in the disinfection room and is intended for medical institutions, laboratories, beauty salons and similar settings. The new design provides double-insurance insulated sealing, convenient operation and firm seals, with a sharp cutting blade and a stable structure. Specifications include 100 W power, a maximum sealing width of 300 mm, a 12 mm impression width, a body measuring 460 x 358 x 165 mm, and a gross weight of 7 kg against a net weight of 6 kg.

BND-X7 2-in-1 Smart Intraoral Camera & X-Ray Film Digitizer System

The BND-X7 is a 2-in-1 smart imaging system that combines HD intraoral capture with instant X-ray film digitizing, streamlining chair-side diagnosis and electronic archiving in one compact chair-mounted device. Sensor resolution 1/4-inch CMOS, 1280 x 720 HD; light source high-luminance white LED with adjustable brightness; a built-in film reading chamber digitizes X-ray film instantly; interface USB 2.0 / video output; power input DC 12V. Standard configuration includes the main intraoral handle, X-ray film reading chamber, data and power cable, power adapter, and wall or dental chair mounting bracket.

LINDAR Built-In Washer-Disinfector

The LINDAR uses a fully built-in design that integrates completely into the side cabinet, reducing the space taken from a separate cleaning worktop and improving utilisation. A large 550 x 450 x 450 mm chamber handles a wide range of instruments and greatly raises throughput. A colour touch display with an acrylic panel is easy to clean and gives high-brightness readings of each stage and temperature. The complete cleaning sequence — pre-wash, main wash, rinse, final rinse, disinfection and drying — is built in and follows the medical instrument reprocessing flow, with an additional drying program so instruments are not removed wet. Selectable programs include intensive (with disinfection and drying) at 80 minutes, standard at 60 minutes, eco at 55 minutes and fast at 30 minutes.

ENROLL-01 Air Compressor

The ENROLL-01 air compressor serves one treatment position and one dental unit, with 300 litres per minute of suction, a maximum vacuum of -37 kPa and a vacuum adjustment range of 3.7-4.4A. Motor power is 550W at 3,440 rpm, the intake pipe is 32mm, rated current is AC230V at 50-60Hz, net weight is 32kg and dimensions are 330×540×620mm.

BND-X1 Precision Digital Intraoral Endoscope with Integrated LCD Display

The BND-X1 is a precision digital intraoral endoscope with an integrated LCD display. Crystal-clear imaging, split-screen freeze and an anti-fog lens deliver dependable, comfortable chair-side diagnostics. Sensor: 1/4-inch CMOS, high-resolution; light source: high-luminance anti-fog white LED; display: integrated LCD with split-screen freeze; interface: USB / video output; power input: DC 12V. Standard configuration includes the high-resolution digital intraoral endoscope handle, integrated display unit, split-screen freeze control module, data and power cable, and power adapter.

Chair-Back Mounted Dental Teaching Head Model JG-C4

The JG-C4 chair-back mounted dental teaching head model is fixed with three adjustable straps that adapt to different dental chair backs, and it offers a choice of shoulder-body colours for use in existing chairs. The three adjustable straps make installation and removal easy, practising in the chair position stays close to common teaching scenarios, and the shoulder body is available in several colours. It suits dental schools, hospital teaching departments and training institutions for posture work, instrument use and basic skills training in a chair environment.