Dental Instruments
منتجات ينشرها مصنّعون صينيون لمستلزمات طب الأسنان. افتحوا المنتج للاطلاع على المواصفات والصور والمورّد المسؤول. · 519
Cordless Endodontic Motor XTP259
The XTP259 cordless endodontic motor is intended for dental root canal treatment and uses a cordless handpiece design, listed in the endodontic category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
Roughing End Mill, 3-Flute Aluminum / 4-Flute Steel, 55/65 Degree Wave-Edge Coated Cutter
Roughing (wave-edge) end mill available as a three-flute aluminium rougher and a four-flute steel rougher: four-flute 55-degree bronze coated, four-flute 65-degree nano-blue coated, and three-flute 62-degree uncoated for aluminium. Swiss Platit coating plus secondary passivation takes the edge progressively from unpassivated to single and then double passivation, giving smoother, finer cutting, a better surface finish and a longer service life. The wave-edge geometry breaks and clears chips during roughing, making it suitable for roughing and stock removal in aluminium and steel, with coating and hardness grade chosen from the workpiece suitability chart.
السعر عند الطلبHEYUANFUMACEMENTEDCARBRIDE
BT-ER High-Precision Tool Holder Series, BT30/BT40 ER25/ER32 Balanced CNC Holder
BT-ER high-precision tool holder series for CNC machines, computerised gantry mills and high-speed machines. A dynamic balancing process keeps cutting steadier with less vibration, allowing higher speeds and more stable accuracy; the bore is ground for high concentricity and long wear life, meeting high-precision machining requirements and outlasting ordinary holders. Balanced version: speeds up to 25,000/30,000 rpm, 20CrMnTi material, HRC58-60 hardness, accuracy within 0.003, 7:24 taper, many sizes. High-precision version: 40CrMnTi material, 48-50 hardness, accuracy within 0.005, 7:24 taper. Sizes include BT30-ER16-100, BT30-ER20-70, BT40-ER16-70, BT40-ER25-100, BT40-ER32-100 and BT40-ER40-80.
السعر عند الطلبHEYUANFUMACEMENTEDCARBRIDE
45° Angled Extraction Fiber-Optic Handpiece LDNP142
The LDNP142 45° angled extraction fiber-optic handpiece has inner-channel four-hole water spray and push-button chuck; the page lists Φ1.59-1.6 mm burs, clamping force above 4.0 kg, 200,000 rpm max speed, a 1:4.2 gear ratio and 0.3 MPa driving pressure, usable with air or electric motors.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
Standard Push-Button Three-Spray Handpiece
The standard push-button three-spray handpiece uses three-point spray atomization with air-water separation and a standard head, part of the standard high-speed handpiece series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
MAX Large-Head Handpiece (Push-Button / Latch)
The MAX large-head handpiece is a dental high-speed handpiece with single-point water spray, anti-retraction design and a large head, 4-hole/2-hole connections and NSK compatibility, available with push-button or latch chuck. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
Dental Equipment Water Supply Unit WSD-III
The WSD-III water supply unit feeds water to dental equipment; the page lists DC12V 0.5A or DC30V 1.5A host input, an AC100-240V 50/60Hz adapter, 50 ml/min water supply, 0.02 MPa water pressure and 5-40 °C working temperature.The official page lists the following specifications: Input voltage: 主机：DC12VO.5A(WSD-III) DC30V1.5A(WSD-III); Adapter: AC100-240V (1 1 10% ) 50/60HZ; Water supply: 50m1/min; Water pressure: 0.02MPa; Working temperature: 50C-400C; Storage temperature: 00C-500C; Humidity: 80%以上; Atmospheric pressure: 70KPa-106KPa.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
1:1 Mini Push-Button Electric Contra-Angle Head XTD400
The XTD400 is a 1:1 mini push-button electric contra-angle head for dental electric motors, listed with a 1:1 gear ratio in the official parameter table. Please refer to the official product page and the manufacturer for the complete specification list.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
Endodontic Treatment Unit SY
The SY endodontic unit is intended for dental root canal treatment; the official description states it combines treatment and measurement in one device. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
XTG134-M4-T2
XTG134-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
Bench Turbine Unit XTH204
The XTH204 is a bench turbine (air supply) unit listed with 0.5 MPa working pressure, 0.6 MPa maximum pressure, 72 L/min flow, 0.22-0.32 MPa for high-speed handpieces, 40-45 dB noise and 51×36×43 cm dimensions.The official page lists the following specifications: Air pressure: 0.5 Mpa; Max pressure: 0.6 Mpa; Flow: ;72L/min; High-speed handpiece pressure: 0.22 Mpa; High-speed handpiece pressure: 0.22Mpa 0.32 Mpa; Noise: 40-45dB; Dimensions: 51 x 36 x 43cm; 总重量: 25KG.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
Bench Water Turbine XTH202-1
The XTH202-1 is a bench water turbine unit listed with 0.2-0.4 MPa water supply pressure for dental equipment water supply.The official page lists the following specifications: Water supply pressure: 0.2-0.4Mpa; 可与牙科用手机连接：: l 1支高速手机; 或1支低速手机: l 吸痰器的管子.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
XTG221-M4/B2
XTG221-M4/B2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; 噪sheng: ≤68dB.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
4:1 FX Mini Push-Button Contra-Angle DMP41-FX
The DMP41-FX is a 4:1 reduction mini push-button contra-angle in the FX series, which the page lists in 4:1, 10:1, 16:1 and 64:1 ratios. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
السعر عند الطلبFoshan Xunteng Medical Technology Co., Ltd
30 Degree Trapezoidal (TR) Single-Tooth Thread Mill, Metric/Inch CNC Cutter
30-degree trapezoidal (TR) single-tooth thread mill for trapezoidal threads such as lead screws, in metric and inch versions. Made from micro-grain carbide with Swiss technology and a Platit PVD vacuum coating, it has a universal round shank that clamps firmly without slipping and a fully ground round edge combination that is sharp, wear resistant, with stable chip evacuation and smooth cutting. The new edge design cuts without chipping; good wear resistance, high hardness and long life are further helped by secondary passivation for corrosion resistance, leaving no tool marks or burrs. It suits carbon steel, alloy steel, pre-hardened and hardened steel, stainless steel, ductile iron, copper alloy, aluminium alloy, titanium alloy and heat-resistant alloy on CNC machining centres.
السعر عند الطلبHEYUANFUMACEMENTEDCARBRIDE