Dental Equipment

ENROLL-01 Air Compressor

The ENROLL-01 air compressor serves one treatment position and one dental unit, with 300 litres per minute of suction, a maximum vacuum of -37 kPa and a vacuum adjustment range of 3.7-4.4A. Motor power is 550W at 3,440 rpm, the intake pipe is 32mm, rated current is AC230V at 50-60Hz, net weight is 32kg and dimensions are 330×540×620mm.

Dental Teaching Training Head Model JG-C9

The JG-C9 dental teaching head model is fitted with an adjustable stainless steel slide rail; once the rail is fixed to the workbench, the head model can be adjusted through several heights and rotated 180 degrees laterally. The high-end design is both practical and good looking, and it is used to set head-model posture during dental teaching and training.

Ease 02 Dental Treatment Unit

WODO AM Paediatric Dental Unit

The WODO AM is a dental unit developed specifically for paediatric dentists, distinguished by its innovative backrest and headrest design, a multimedia bracket integrated into the operating light, and the versatility of its cart and water unit. The EDI Faro operating light has a multi-joint long arm and three-dimensional head that focus on any area of the oral cavity; four LEDs produce natural light at 4,000 K with illumination from 3,000 to 43,000 lux. The distinctive backrest is integrated with the headrest in a two-stage smooth movement and suits children from 90 cm to 1.65 m tall, roughly four to fifteen years old.

SELIMA

Single-Position Electric Dental Teaching Simulator JG-A2

The JG-A2 electric dental simulator uses an integrated all-in-one design that makes hands-on practice convenient for students, saves walking space and gives instructors a clear view for supervision. The configuration shown is the new A2 version with a sheet-metal wooden table and a four-hole standard lamp; it belongs to the electric series within the simulator range and is used for simulated hands-on training in dental teaching.

Portable High-Frequency Handheld Dental X-Ray Unit

The portable dental X-ray unit uses high-frequency DC inverter technology and a micro-focus tube to deliver sharp diagnostic radiographs with minimal radiation scatter, and is fully compatible with digital RVG sensors and phosphor plate scanners. Generator type: high-frequency inverter DC generator; tube shielding and scatter control: internal lead casing plus external circular backscatter ring; imaging modes: adult/child and anterior/molar/bitewing presets; receptor compatibility: digital RVG sensors, phosphor plates (PSP) and D/E-speed film; power architecture: high-endurance rechargeable lithium battery with 100+ exposures per charge.

DGF-M Stainless Steel Sealing Machine

This sealing machine is designed specifically for sealing sterilization pouches in the disinfection room and is intended for medical institutions, laboratories, beauty salons and similar settings. The new design provides double-insurance insulated sealing, convenient operation and firm seals, with a sharp cutting blade and a stable structure. Specifications include 100 W power, a maximum sealing width of 300 mm, a 12 mm impression width, a body measuring 460 x 358 x 165 mm, and a gross weight of 7 kg against a net weight of 6 kg.

BND-X1 Precision Digital Intraoral Endoscope with Integrated LCD Display

The BND-X1 is a precision digital intraoral endoscope with an integrated LCD display. Crystal-clear imaging, split-screen freeze and an anti-fog lens deliver dependable, comfortable chair-side diagnostics. Sensor: 1/4-inch CMOS, high-resolution; light source: high-luminance anti-fog white LED; display: integrated LCD with split-screen freeze; interface: USB / video output; power input: DC 12V. Standard configuration includes the high-resolution digital intraoral endoscope handle, integrated display unit, split-screen freeze control module, data and power cable, and power adapter.

SCAN-i6 Intraoral Scanner

The SCAN-i6 intraoral scanner is lighter and offers longer battery life, faster scanning, an innovative emergency mode, wireless dual-band Wi-Fi, a motion gesture sensor, a large deep field of view and higher accuracy. The handpiece measures 260×40×32mm and connects wirelessly, weighs 230g with battery and ships with two batteries; field depth is 25mm at a scanning distance of 0-25mm, accuracy is ≤10μm per crown and 20μm for a full arch, imaging is continuous optical video capture, and output formats are STL, PLY (true colour) and OBJ.

BND-X2 17-Inch Integrated Dental Intraoral Camera System

The BND-X2 is a 17-inch chairside intraoral camera system featuring an embedded operating system, a 5-key ergonomic handle, single full-screen and 4-quadrant split comparison display, auto-save to USB flash drive up to 8GB, and Wi-Fi QR code image transfer with smart screen casting. Operating system: embedded medical firmware; screen size and resolution 17 inches (1280 x 1024 pixels); display modes single full screen or 4-quadrant split comparison; key control via 5 tactile handpiece buttons; storage by USB flash drive auto-save supporting up to 8GB; mounting compatible with dental unit light post bracket and VESA desktop stand.

DGS-280A / DGS-280A+ Electric-heating Portable Steam Sterilizer

The DGS-280A/A+ is an electric-heating portable steam sterilizer built from quality stainless steel, simple and safe to operate, with electric heating, over-pressure self-relief and a dual-scale class-2 pressure gauge. The DGS-280A holds 18L and the DGS-280A+ 24L, both at 2.0kW, 110V/220V 60Hz/50Hz, rated working pressure 0.142MPa and rated working temperature 126℃, with chamber volumes of Φ280×295 and Φ280×390 respectively.

SCAN11 Intraoral Scanner

The SCAN11 intraoral scanner weighs 210 g, measures 240 x 49.5 x 30.5 mm and scans at a distance of 0 to 15 mm. It uses continuous optical video capture with synchronised 3D video imaging at 15 frames per second, an LED light source and a 13 x 13 mm field of view. Accuracy is 10 micrometres or better for a single crown, 15 micrometres for a single arch and 20 micrometres for a full arch. Standard and mini tips give scan areas of 15 x 15 mm and 12 x 12 mm with 15 mm depth of field, and the scan tip can be autoclaved 100 times (121 °C for 16 minutes, 134 °C for 3.5 minutes). Scanning takes 30 seconds per arch and 90 seconds for a full arch with occlusion; service life exceeds 30,000 hours and exports are in STL, PLY and OBJ.

TANZO Z3/Z4 Table-Top Steam Sterilizer

The TANZO Z3/Z4 is a European Class B pre-vacuum pressure steam sterilizer with 18 L and 23 L chamber options. Its digital panel has a clean design where every operation is completed simply by pressing a button; the panel shows the chamber temperature, pressure reading and sterilization time monitored in real time by sensors, and LED indicators display distilled water and waste water tank levels, water quality information and cycle status. The sterilizer also offers test programs, user-definable sterilization programs and preset functions, uses magnetic side panels for easy removal and internal servicing, and provides multiple sterilization programs at 121 °C and 134 °C.

YOU(M) Mobile Line-frequency Dental X-ray Unit

The YOU(M) mobile line-frequency dental X-ray unit uses a Canon radiation generator made in Japan, and its spring-loaded mobile arm is designed for greater stability and a longer service life. Supply is AC 220V ±10% at 50/60Hz, maximum power 900VA, focal spot 0.7mm, tube voltage 70kV ±10%, anode current 7mA ±15%, anode angle 16°, duty cycle 1/60, half-value layer 1.6mm Al at 70kV, inherent filtration ≥0.5mm Al and leakage radiation <0.07mGy/h at one metre.