Dental Instruments
Productos publicados por fabricantes dentales de China. Abra un producto para ver sus especificaciones, imágenes y el proveedor que lo fabrica. · 520
K-Series Inner-Channel Air Motor
The K-series inner-channel air motor is a low-speed dental air motor with an inner water channel, in the inner-channel low-speed handpiece category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Fiber-Optic Standard Push-Button Quick-Coupling Handpiece
The fiber-optic standard push-button quick-coupling handpiece has a standard head, fiber-optic illumination and a quick coupling compatible with NSK systems; the page lists push-button chuck, speed ≥360,000 rpm, air pressure 0.2-0.25 MPa, light intensity ≥25,000 lx and bulb voltage 3.0-3.2 V.The official page lists the following specifications: Chuck type: Push button按压取针; Speed: ≥360,000rpm; Air pressure: 0.2-0.25Mpa(2-2.5 kgf/cm²); Water pressure: 0.1-0.25Mpa; Light intensity: ≥25000lx; Bulb voltage: 3.0-3.2V; 车针规格/Bur applicable: Φ1.59mm-Φ1.60mm; 噪 音/Noice: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
4:1 Polishing Contra-Angle DPG41-FX
The DPG41-FX 4:1 polishing contra-angle is a low-speed dental handpiece for polishing, listed by the manufacturer in 4:1, 10:1, 16:1 and 64:1 ratios. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
30 Degree Trapezoidal (TR) Single-Tooth Thread Mill, Metric/Inch CNC Cutter
30-degree trapezoidal (TR) single-tooth thread mill for trapezoidal threads such as lead screws, in metric and inch versions. Made from micro-grain carbide with Swiss technology and a Platit PVD vacuum coating, it has a universal round shank that clamps firmly without slipping and a fully ground round edge combination that is sharp, wear resistant, with stable chip evacuation and smooth cutting. The new edge design cuts without chipping; good wear resistance, high hardness and long life are further helped by secondary passivation for corrosion resistance, leaving no tool marks or burrs. It suits carbon steel, alloy steel, pre-hardened and hardened steel, stainless steel, ductile iron, copper alloy, aluminium alloy, titanium alloy and heat-resistant alloy on CNC machining centres.
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE
XTG63-M4/B2-T1
XTG63-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
XTG61-M4/B2-T1
XTG61-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
MAX Standard Push-Button Quick-Coupling Handpiece
The MAX standard push-button quick-coupling handpiece is a quick-coupling dental high-speed handpiece with a universal NSK-compatible quick coupling, as stated on the official page. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Self-Illuminating Standard Push-Button Five-Light Handpiece
The self-illuminating standard push-button five-light handpiece is a standard-head high-speed handpiece with built-in light, offered with 4-hole and 2-hole connections in the standard high-speed series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
XTG611-M4-Y1
XTG611-M4-Y1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Standard Three-Spray Push-Button Quick-Coupling Handpiece (Self-Illuminating)
The standard three-spray push-button quick-coupling handpiece (self-illuminating version) features three-point spray atomization, a standard head, push-button bur changing and an NSK-compatible quick coupling, listed in the quick-coupling high-speed series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Progressive Multi-Taper NiTi Rotary File System (Plus)
The progressive multi-taper NiTi file system comprises SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, #18-#30 diameters, 250-350 rpm speeds, 1.0-3.0 N.cm torque and lengths of 19 mm or 21/25 mm. Please refer to the official product page and the manufacturer for the complete specification list.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
XB Large-Head Push-Button Handpiece
The XB large-head push-button handpiece is a large-head dental high-speed handpiece with self-illuminating light, available with 4-hole and 2-hole connections in the standard high-speed series and compatible with NSK connections. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
4-Flute Carbide Corner Radius End Mill for Steel, 60/65 Degree Coated Bull Nose Cutter
Four-flute tungsten carbide corner-radius (bull nose) end mill for steel, available in a 60-degree bronze-coated version and a 65-degree nano-blue version. It uses a Swiss Platit coating and a secondary passivation process for a smooth edge and fine, even cutting; micro-grain carbide stock ground on an imported ANCA five-axis machine keeps it free of chip sticking, high in hardness, slow in wear, mirror finished and durable for a longer service life. The workpiece suitability chart covers carbon steel, alloy steel, pre-hardened and hardened steel, stainless steel, cast iron, copper alloy, aluminium alloy, titanium alloy and heat-resistant alloy, selected by hardness range.
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE
45° Push-Button Handpiece
The 45° push-button handpiece is intended for angled impacted-tooth extraction, with a standard head, push-button chuck, 4-hole and 2-hole connections and NSK compatibility; fiber-optic and self-illuminating versions are also listed. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
60 Degree Metric/British Range Single-Tooth Thread Mill, Versatile Carbide Cutter
60-degree range single-tooth thread mill that covers a range of metric and British threads with one tool. Made from micro-grain carbide with Swiss technology and a Platit PVD vacuum coating, it has a new edge design that cuts sharply without chipping, with stable chip evacuation, smooth cutting, good wear resistance, high hardness and a long life; secondary passivation improves corrosion resistance and extends life, leaving no tool marks or burrs with efficient, precise threads. It suits carbon steel, alloy steel, pre-hardened and hardened steel, stainless steel, ductile iron, copper alloy, aluminium alloy, titanium alloy and heat-resistant alloy on engraving machines and CNC machining centres.
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE