Dental Instruments
Productos publicados por fabricantes dentales de China. Abra un producto para ver sus especificaciones, imágenes y el proveedor que lo fabrica. · 520
High-Gloss CNC Turning Insert for Aluminum and Copper, Carbide Turning Blade
CNC turning insert dedicated to aluminium and copper, with the key advantages of long wear life, a sharp edge and smooth cutting, quality assured. The insert is hard and tough, cuts sharply and resists wear, leaving a fine smooth surface on aluminium parts; it is widely used in machinery, chemical, medical, sports, defence and petroleum industries for aluminium parts and forming work. Recommended parameters: M stainless 70-120 m/min, K aluminium 90-280 m/min (for reference only; actual machining conditions govern). Inserts are selected by shape code and thickness code (01 = 1.59 mm, 02 = 2.38 mm, T2 = 2.78 mm, 03 = 3.18 mm, T3 = 3.97 mm, 04 = 4.76 mm, 06 = 6.35 mm).
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE
Rahor CR99 Air-blowing Mouth Mirror
The Rahor air-blowing mouth mirror blows a continuous stream of air through a blowing hole so that the mirror surface stays clear during treatment, which addresses the fogging that dentists report when working in the mouth. It uses a proprietary wide-area fluid control technology in which a very small air flow covers 100% of the mirror surface, so the air does not disturb the working field. A double-joint design allows the head to rotate through 360 degrees so the mirror can be set to almost any angle needed.
Precio bajo consultaBeijing Ruihao Medical Technology Co., Ltd.
Precision-Ground Tungsten Carbide Rod, HRC65, for Cutting Tool Blanks
Precision-ground tungsten carbide rod, brand Fuma, made from micro-grain carbide stock at HRC65 working hardness for long, consistent service. Rods are supplied in 0.1-50 mm outside diameter steps with diameter tolerance from -0.001/-0.005 to -0.001/-0.009, runout of 0.0025-0.018 mm over 30-330 mm lengths, Ra0.4 surface roughness and 0.4+0.15 to 1.6+0.4 mm end chamfers. The rod can be ground into cutting tools such as pointed cutters, end mills, drills and turning tools, and is also used to cut cast iron, non-ferrous metals, plastics, chemical fibre, graphite, glass, stone, ordinary steel and stainless steel and other difficult materials, with good rigidity and wear resistance.
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE
XTG8-M4/B2-T1
XTG8-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
XTG64-M4-T1
XTG64-M4-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
60 Degree NPT/NPTF Tapered Pipe Thread Mill, American Standard Carbide Thread Cutter
60-degree American standard full-profile thread mill in two versions: NPT tapered pipe thread and NPTF tapered sealed pipe thread. The tool uses Swiss technology and a Platit PVD vacuum coating; the new edge design cuts sharply without chipping and evacuates chips stably and smoothly, while secondary passivation improves corrosion resistance and extends tool life with no tool marks or burrs. Hard and wear resistant, it suits thread cutting in carbon steel, alloy steel, stainless steel, ductile iron, copper alloy, aluminium alloy, titanium alloy and heat-resistant alloy, and is intended for engraving machines and CNC machining centres.
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE
1:1 Mini Push-Button Electric Contra-Angle Head XTD400
The XTD400 is a 1:1 mini push-button electric contra-angle head for dental electric motors, listed with a 1:1 gear ratio in the official parameter table. Please refer to the official product page and the manufacturer for the complete specification list.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Tungsten Carbide Disc Blank (Round Plate), Customizable Grades YG8/FM18H/FM10H
Tungsten carbide disc blank (round plate) made from micro-grain carbide stock, long lasting and wear resistant, ground on an imported ANCA five-axis machine for a sharp, tough edge and high accuracy. The blanks serve industries such as aviation, new energy and high-speed rail; the factory produces its own blanks and offers non-standard and special-shape customization. Common grades include YG8 (medium grain, 8.0% binder, 89.5 HRA, density 14.8), FM18H (ultrafine, 10.0%, 91.5 HRA, 14.5) and FM10H (medium, 10.0%, 91.0 HRA, 12.4), suited to rough milling of uneven surfaces and interrupted cuts in cast iron, non-ferrous metals, alloys and non-metallic materials.
Precio bajo consultaHEYUANFUMACEMENTEDCARBRIDE
Standard Push-Button Four-Spray Handpiece (Self-Illuminating)
The self-illuminating standard push-button four-spray handpiece features four-point water spray, an anti-retraction design, a standard head and 4-hole/2-hole connections compatible with NSK, in the standard high-speed series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Mini Card-Type External-Water Head XTD504-D
The XTD504-D is the head component of the mini card-type external-water contra-angle, offered in 4:1, 16:1, 20:1 and 64:1 ratios in the reduction contra-angle head category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Dental Equipment Water Supply Unit WSD-III
The WSD-III water supply unit feeds water to dental equipment; the page lists DC12V 0.5A or DC30V 1.5A host input, an AC100-240V 50/60Hz adapter, 50 ml/min water supply, 0.02 MPa water pressure and 5-40 °C working temperature.The official page lists the following specifications: Input voltage: 主机：DC12VO.5A(WSD-III) DC30V1.5A(WSD-III); Adapter: AC100-240V (1 1 10% ) 50/60HZ; Water supply: 50m1/min; Water pressure: 0.02MPa; Working temperature: 50C-400C; Storage temperature: 00C-500C; Humidity: 80%以上; Atmospheric pressure: 70KPa-106KPa.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
1:5 Fiber-Optic Speed-Increasing Contra-Angle XTDW312-Y1
The XTDW312-Y1 is a 1:5 speed-increasing contra-angle with fiber-optic illumination, 4-hole inner water cooling and spring-axis push-button chuck; the page lists φ1.595-1.6 mm burs, clamping force above 4.0 kg, 200,000 rpm max speed and 0.3 MPa driving pressure.The official page lists the following specifications: 机器类型: 带有光纤增长曲线的手机; 织针尺寸: φ1.595-1.6mm; Cooling system: 4孔内置水路; 夹持力: 4.0Kg以上; 换针: 压力（弹簧轴）; 最大速度: 200.000rpm; 驱动压力: 0.3MPa; 齿轮比: 1:5.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Endodontic Treatment Unit SY
The SY endodontic unit is intended for dental root canal treatment; the official description states it combines treatment and measurement in one device. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
XTG134-M4-T2
XTG134-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd
Inner-Channel Electric Motor (220V / 32V DC)
The inner-channel electric motor has an AC220V/50Hz controller input, 32 V DC control box input, 50 W power, LED digital display, E-type motor interface and built-in water cooling; the page lists 1,000-40,000 rpm with selectable 16:1, 1:1 and 1:5 ratios.The official page lists the following specifications: 转速率的多种选择，16: 1，1：1，1：5：; Input voltage: 220V，50Hz 电压输入电压：220V，50Hz; Control box input: 32DC； 控制箱的输入电压：32DC； 控制箱的输入电压：32DC。; Power: 50W； 功率：50W； 功率：50W。; Display: LED数字粗体显示 显示方式：LED数字粗体显示; Motor interface: E； 电动机接口：E； 电动机接口：E。; Cooling: 内置水冷 冷却方式：内置水冷; Speed range: 1000-40000rpm 速度范围：1000-40000rpm.
Precio bajo consultaFoshan Xunteng Medical Technology Co., Ltd