Productos

4:1 FX Mini Push-Button Contra-Angle DMP41-FX

The DMP41-FX is a 4:1 reduction mini push-button contra-angle in the FX series, which the page lists in 4:1, 10:1, 16:1 and 64:1 ratios. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

WOZO A1/A2/AM Dental Unit

The new WOZO is a continuous-style dental unit that the maker presents as a whole-scenario dental treatment solution. Key structures use quality processes and parts, the chair body is made from high-pressure die-cast aluminium and the main load-bearing components are produced by high-pressure die casting so the unit runs stably from the day it leaves the factory. The exterior uses all-round rounded aesthetics with no sharp corners, which the maker says minimises the risk of collision during operation, together with flowing surface transitions and a restrained colour scheme. A high-definition LCD system with microcomputer control gives the clinician clearer status visualisation. Ergonomic features include a precision die-cast aluminium headrest shell with two-joint wrench adjustment, a thickened butterfly-shaped backrest and soft silicone padding. The new Apollo operating light covers 5000–30000 lux at 4000–5700 K, uses a professional soft-light lens with anti-glare technology, and offers both manual and sensor control; the new foot switch is built around a two-pedal zone control system.

Standard Three-Spray Push-Button Quick-Coupling Handpiece (Self-Illuminating)

The standard three-spray push-button quick-coupling handpiece (self-illuminating version) features three-point spray atomization, a standard head, push-button bur changing and an NSK-compatible quick coupling, listed in the quick-coupling high-speed series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Instrument Cleaning Box

The cleaning box is made of polymer material with a stable structure that resists ageing, offering a convenient solution for instrument cleaning in clinics, dental laboratories and similar settings. An ergonomic carrying handle allows secure transport, while the specially shaped drain channel ensures complete drainage and prevents instruments from tangling or catching. Dimensions 315×220×135mm, net weight 1kg.

Aluminum Ball Nose 2-Flute End Mill, Rainbow-Coated Solid Carbide R-Type Ball Cutter

Rainbow-coated two-flute ball nose end mill made of premium tungsten carbide. The ball-nose R corner is used for curved profiling and finishing; the cutter is sharp and tough with a long service life and leaves a smooth surface without tool marks, and each tool is ground on an imported ANCA five-axis grinder with a high-gloss mirror finish. It suits copper alloy, aluminium alloy, magnesium alloy, acrylic, wood and other non-ferrous materials, and is used on high-speed machines such as CNC machining centres, engraving machines and precision engravers. Standard sizes are listed as cutting diameter x R corner x flute length x shank diameter x overall length, for example 3 x R1.5 x 8 x d4 x 75, 1.5 x R0.75 x 3 x d4 x 50, 4 x R2 x 10 x d4 x 75 and 6 x R3 x 12 x d6 x 75.

Mega+ Custom Implant Abutment

Mega+ custom implant abutments provide an individualized service built around emergence profile, restorative space and suprastructure design in implant restorations. Abutment design must consider the implant system, soft tissue conditions, restorative space and clinical plan, and fabrication should be based on complete data reviewed by a qualified professional. The supported implant systems, data requirements, design confirmation and delivery process are available from the Mega+ team; no numeric specifications are published on the page.

UniAll Zirconia Block

UniAll zirconia blocks are designed as a true all-in-one solution, combining balanced strength (950-1100 MPa) with natural translucency (43%-50%) to cover a wide range of clinical indications. With a simplified product concept of one block for all indications and a unified pricing strategy across all sizes, UniAll helps labs reduce inventory pressure while improving efficiency and profitability. Indications run from substructure crown and 3-unit bridges to multi-unit full contour bridges and implant long span bridges.

MAX Large-Head Handpiece (Push-Button / Latch)

The MAX large-head handpiece is a dental high-speed handpiece with single-point water spray, anti-retraction design and a large head, 4-hole/2-hole connections and NSK compatibility, available with push-button or latch chuck. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Light Wire Cutter

The cutting edge is thin and sharp, mainly used for cutting ligature wire and rubber rings with a diameter of less than 0.3 mm. Orthodontic pliers are used for holding, bending, cutting and removing during orthodontic treatment. The instrument consists of jaws, a joint and handles, usually made of stainless steel, and is reusable. Product size 125 x 54 mm, package size 175 x 80 x 20 mm. Steam sterilization must not exceed 140 degrees C and direct flame heating is not allowed; 24-month warranty service.

CAVEX CA38 Precision Alginate Impression Material

CAVEX CA38 is the most advanced precision impression material in the range, a viscous, tough material suited to general dental treatment and orthodontic impressions. Its high elasticity and tear resistance make it ideal for precision impressions with detail down to 25μm; the powder is very fine, giving a smooth bubble-free surface and excellent plaster compatibility. 500g pack, 2-day stability, 25μm accuracy, light blue, non colour-changing, elasticity ++++, mint flavour, 5-year shelf life.

Aluminum 3-Flute Corner Radius End Mill, Rainbow Coating, High-Gloss R-Corner Router Bit

Rainbow-coated aluminium corner-radius (bull nose) cutter with a three-flute R-corner geometry for high-gloss machining of aluminium parts. The full-edge anti-vibration design gives a smoother surface free of tool marks, and the large chip flutes evacuate chips faster for higher productivity. Each tool is precision-ground on an ANCA grinder for high accuracy, staying sharp without chip sticking. In aluminium it allows high-speed cutting with a flat, bright cut. Made from premium tungsten carbide (micro-grain) stock and ground on an imported ANCA five-axis machine, it is sharp, tough, hard wearing and long lasting, and suits high-speed equipment such as CNC machining centres, engraving machines and precision engravers.

SELINA

MAX-1 Standard Handpiece (Push-Button / Latch)

The MAX-1 standard handpiece is a dental high-speed handpiece with single-point water spray, anti-retraction design and standard head, 4-hole/2-hole connections and NSK compatibility, available with push-button or latch chuck. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

60 Degree 2-Tooth Multi-Function Thread Mill, Drill-Mill Integrated Carbide Cutter

60-degree multi-function two-tooth thread mill with an integrated drill-and-mill design that can drill and thread in one operation. Base material is micro-grain carbide with a Platit nano coating, brand Fuma; the universal round shank clamps firmly without slipping and resists vibration. It machines copper, stainless steel, alloy steel, aluminium parts, aluminium alloy and cast iron on engraving machines and CNC machining centres. Micro-grain carbide is ground on a five-axis machine with 3M wheels for wear resistance, hardness and long life; the new edge design cuts sharply without chipping with stable chip evacuation, and secondary passivation improves corrosion resistance, leaving no tool marks or burrs.

Gusrom UT White Zirconia Block-CAD/CAM dental material for Veneer

Gusrom UT White zirconia block features 49% of high translucency and natural luster after sintering. UT White zirconia disc unlocks a new realm in fabricating natural and aesthetic zirconia veneers, improving patients’ satisfaction. UT White zirconia ceramic disc allows fast delivery time of CAD/CAM or full digital workflow. When UT White zirconia works with the GSF 90 zirconia sintering furnace, the fast sintering time can arrive 3h.