Productos

Rahor Signet Full-contour Transparent Matrix

Rahor Signet matrices carry a tooth contour so that the natural shape and contact of the tooth can be rebuilt, and the maker stresses that there is no need to worry about overhangs or flash. The matrices come in different sizes with a pre-shaped tooth contour curve, covering Class III and IV restorations, black triangles, space closure, small lateral incisors and posterior restorations. A balance of elasticity and stiffness is described as improving adaptation of the strip to the tooth, which supports a good restorative result in these aesthetic situations.

DGT-X Series Bottom-Opening Pre-Vacuum Table-Top Sterilizer (DGT-18X/DGT-23X)

The DGT-X series is a bottom-opening pre-vacuum table-top sterilizer available in 18 L and 23 L chambers. It follows the European Class B standard with triple pre-vacuum pulses and features a 4.3-inch full-colour LED display plus an electronic safety door interlock, while the bottom pull-open door design eases loading and unloading. A microprocessor runs the whole cycle automatically with automatic fault detection, and a high-altitude adaptive system performs barometric calibration. Nine preset programs, three test programs and a standard test port are included, the machine is covered by comprehensive automatic protection, and a built-in high-efficiency independent steam generator, built-in printer and USB function are provided, with water-quality testing optional.

16:1 Mini Push-Button Electric Contra-Angle Head

The 16:1 mini push-button electric contra-angle head (DDMP161-NK) is a 16:1 reduction mini attachment for dental electric motors with push-button bur changing.The official page lists the following specifications: Technical/技术参数: <!--; 产品名称: 16:1迷你按压电动弯机头; Product code: DDMP161-NK; 转速（min-1）: 140-550; Gear ratio: 16:1; Torque (Ncm): 0.3-3.0.

XTG63-M4/B2-T1

XTG63-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

Push-Button Contra-Angle (External Water)

The push-button contra-angle is a low-speed dental handpiece offered in 4:1, 16:1, 20:1 and 64:1 ratios, with an external-water version in the same series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Desktop-Mounted Dental Teaching Head Model JG-C7

The JG-C7 desktop-mounted dental teaching head model is secured to the workbench with two stainless steel clamps and adapts to different desktop conditions. The head model supports 180-degree rotation, stowing and height adjustment, so a dental practice station can be set up quickly on an existing desk. The two stainless steel clamps fix to the edge of the tabletop, making use of existing classroom furniture, while the rotation, stowing and height adjustment reduce the space occupied when training is finished. It suits desktop practice in dental schools, hospital teaching departments and training institutions for basic instrument handling, posture exercises and group teaching.

XTG134-M4-T2

XTG134-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

1:1 Mini Push-Button Electric Contra-Angle Head XTD400

The XTD400 is a 1:1 mini push-button electric contra-angle head for dental electric motors, listed with a 1:1 gear ratio in the official parameter table. Please refer to the official product page and the manufacturer for the complete specification list.

Dental Vacuum Forming Machine D-1

The D-1 dental vacuum forming machine heats and forms thermoforming sheets quickly and accepts the sheet types commonly available on the market. Heating time, vacuum time and vacuum strength can be set for each sheet type to obtain precise adaptation, and the large display keeps the settings visible. Heating is infrared, the body is all-aluminium and is described as sturdy and durable, and overheat protection is provided to prevent burns. Heating power is 400 W and vacuum power 900 W; the unit measures 260 x 315 x 380 mm and weighs 7.4 kg including the steel balls, which are supplied with a ball bowl, a brush with magnet, two hex keys and a power cord.

Tungsten Carbide Saw Tips, Micro-Grain Blanks, Grades FM01-FM15/YG Series

Tungsten carbide saw tip blanks made from micro-grain carbide stock, long lasting and wear resistant, ground on an imported ANCA five-axis machine for a sharp, tough edge and high accuracy, and available made to order. Tips are supplied by grade: FM01 (ultrafine, 2.2% binder, 94.8 HRA, density 15.20, 2400 MPa, K01), FM03 (submicron, 3.0%, 94.2 HRA, K01), FM35 (submicron, 4.8%, 93.4 HRA, 15.00, 2500, K05), YF5 (fine, 5.0%, 92.0 HRA, 15.00, 2600, K10), YG6 (medium, 6.0%, 90.8 HRA, 14.90, 2600, K10), YF7 (medium, 7.0%, 14.73, 2700, K20) and YG8 (medium, 8.0%, 90.0 HRA, 14.72, 2900, K20), for brazing onto saw teeth.

CAVEX CA38 Precision Alginate Impression Material

CAVEX CA38 is the most advanced precision impression material in the range, a viscous, tough material suited to general dental treatment and orthodontic impressions. Its high elasticity and tear resistance make it ideal for precision impressions with detail down to 25μm; the powder is very fine, giving a smooth bubble-free surface and excellent plaster compatibility. 500g pack, 2-day stability, 25μm accuracy, light blue, non colour-changing, elasticity ++++, mint flavour, 5-year shelf life.

Orthodontic Separators

Separators make room between teeth for orthodontic appliances. The separator moves the teeth apart, so space is made between them to fit an orthodontic band. They are typically used when space has to be reserved for an orthodontic band, as an auxiliary consumable before fixed appliance assembly.

Large-Taper Progressive NiTi Rotary Files (Plus)

The large-taper progressive NiTi file system includes SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, tip sizes #18-#30, 250-350 rpm, torque 1.0-3.0 and lengths of 19 mm or 21/25 mm, for large-taper canal preparation.

DGF-M Stainless Steel Sealing Machine

This sealing machine is designed specifically for sealing sterilization pouches in the disinfection room and is intended for medical institutions, laboratories, beauty salons and similar settings. The new design provides double-insurance insulated sealing, convenient operation and firm seals, with a sharp cutting blade and a stable structure. Specifications include 100 W power, a maximum sealing width of 300 mm, a 12 mm impression width, a body measuring 460 x 358 x 165 mm, and a gross weight of 7 kg against a net weight of 6 kg.

Stirring Rod