Productos

10:1 Push-Button Reciprocating Contra-Angle XTDW321

The XTDW321 is a 10:1 push-button reciprocating contra-angle, listed in the official parameter table as a 10:1 push-button left-right reciprocating contra-angle. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Mega+ YIQI Micro-orthodontics

Mega+ YIQI micro-orthodontics is designed for people with mild anterior irregularity, and the official site states that the anterior teeth can be aligned in about 6 months. The plan is guided by the golden proportion of the upper anterior teeth, uses DSD aesthetic design, and repositions the teeth with YIQI clear aligners; about 12 sets of aligners are used, transparent, removable, compatible with normal eating and brushing. The plan is designed by a specialist team, and the page states the product is certified by the national food and drug administration. The workflow runs from initial examination and treatment plan to aligner fabrication, completion and retainer wear.

Mobile Cart 2

Cordless Endodontic Motor with Charger

The cordless endodontic motor uses a 3.7 V handpiece with a built-in 1500 mAh battery and about 4 hours of charging time; the charger accepts AC100-240 V 50/60 Hz and outputs 5 V/1000 mA, for dental root canal treatment.The official page lists the following specifications: 可应用16: 1角度，可拆卸式高温消毒; 技术参数: l 可拆卸、高温消毒的LED照明系统; 无绳手机，行动自由: l LED屏幕，三键开关，操作简单智能; 可应用16:1角度，可拆卸式高温消毒: l 主流镍钛合金系统可设置九种不同的操作程序; 自动扭转模式使治疗更安全: l 专业的往复运动模式; 自动断电，节省电池: <!--.

Reverse-pull Headgear / Face Mask (rod type)

The reverse-pull headgear (face mask) is used by orthodontists as an auxiliary device when correcting the human dentition, and is available in adjustable and rod types. It consists of a chin cup, a forehead pad and metal connectors, with a product size of 225 x 88 mm. Metal parts are made of austenitic stainless steel 12Cr18Ni9 and plastic parts of ABS; the traction hook must withstand a pull of no less than 10 N with the screw tightened. Traction force is generally 500-1000 g and can be adjusted to the patient age and tolerance; shelf life and warranty are both 36 months.

XTG140-M4-T2

XTG140-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; Speed ratio: φ1.59mm-φ1.60mm; Noise: ≤68dB.

Tungsten Carbide Glass Drill Bit Blank, Customizable

Glass drill bit produced to order by Heyuan Fuma Cemented Carbide Co., Ltd. The item is a carbide glass drill blank or finished tool in tungsten carbide for drilling glass and other brittle materials, with the exact size and point geometry confirmed per order. The company controls production from raw material to finished product in house and can guarantee quality along that chain, supplying both standard catalogue items and customized tools plus cutting services.

Rough Trimming Scissors

The rough trimming scissors are an accessory of the dental vacuum forming system, used for the initial trimming of dental foils. The curved blade tip helps avoid scratches; stainless steel blades are sharp, corrosion-resistant and resistant to rusting for safe, durable use, and the ergonomic handle is comfortable to hold.

Y-T1 Buccal Tube (Roth / MBT / Edgewise)

The Y-T1 buccal tube has a high strength monoblock hook and an occlusal indent on the base for precise positioning, with a bell mouth design that makes threading the arch wire easy. It uses fine medical stainless steel with precision casting and a compact design. Bondable buccal tubes are firmly brazed with a mesh base, a slightly brazed cap can be easily removed as required, the indent on the base makes positioning easy and the mesh base enhances bonding strength; 80-mesh bonding gives stronger bonding than others. Types cover Roth, MBT and Edgewise; material is stainless steel; OEM/ODM is available.

Measuring Cup

Bench Water Turbine XTH202

The XTH202 is a bench water turbine unit listed with 0.2-0.4 MPa water supply pressure for dental equipment water supply.The official page lists the following specifications: Water supply pressure: 0.2-0.4Mpa; 可与牙科用手机连接：: l 1支高速手机; 或1支低速手机: <!--.

Alginate Impression Material Mixer GX300

The GX300 alginate impression material mixer completes the mixing of impression powder accurately within seconds. The machine is fully automatic, standardises the alginate mixing procedure, reduces impression powder waste and is easy to use and to clean up afterwards. A patent number, ZL 2020 3 0380108.4, is stated for the unit. Timer range is 1 to 16 seconds with three preset programmes of 8, 10 and 12 seconds; the unit weighs 15 kg, measures 250 x 205 x 290 mm and runs at 2850 rpm on 220 V or 3400 rpm on 110 V. Four mixing bowls, a spatula, a stirring rod, a storage box, a powder scoop, a water bottle and a power cord are supplied.

XTG63-M4/B2-T1

XTG63-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

EQ400-SPB Ultrasonic Cell Disruptor and Homogeniser with Sound-Proof Box, 20 kHz 400 W

The EQ400-SPB is the EQ400 ultrasonic cell disruptor and homogeniser with a sound-proof enclosure, listed at 20 kHz and 400 W. A purely digital circuit provides stable constant power output, and several ultrasonic tool heads are supported for samples from 0.1 mL to 4000 mL. Touch operation with twenty saved process programs keeps protocols reproducible. The enclosure reduces the operating noise that would otherwise be exposed to everyone in the laboratory.

20:1 Implant Contra-Angle XTDW313-2

The XTDW313-2 is a 20:1 implant contra-angle with external fixed single-outlet water cooling and push-button chuck; the page lists 1,000 rpm max speed, 50-55 N max torque, noise ≤65 dB and a stainless-steel body without fiber optic.The official page lists the following specifications: 上一个：: XTDW314-Y; 下一个：: XTDW332; 相关产品: 截骨直机 DJW-70-2; 截骨直机 DJZ-70-2: 截骨直机 DJZ12; 截骨弯机 DJW12: 无线根管治疗仪; 10:1左右往复弯机（根管治疗）: 无线根管治疗仪; 1:5光纤内水道弯机: 产品询价; 添加一个: 选择.