Dental Equipment

BES18/23-D Touch-screen Steam Sterilizer

The BES18/23-D touch-screen sterilizer is offered in BES18L and BES23L capacities. Both are rated 230V/50Hz with 1800W of power; chamber sizes are ⌀249×355mm and ⌀249×450mm respectively, overall dimensions are 618×420×468mm for both, and net weights are 47kg and 50kg.

Mobile Cart 2

BES-18L/23L-N-LED Steam Sterilizer

The BES-18L/23L-N-LED steam sterilizer offers 18 L and 23 L chambers rated at 230 V/50 Hz and 1,800 W, with chamber sizes of 249 x 350 mm and 249 x 450 mm and overall dimensions of 580 x 460 x 450 mm. It has touch keys, a fast USB port and a large water tank: 7 litres of capacity, an open tank that is easy to clean, and a built-in water-quality sensor that reduces fault rates and extends service life. At 100 cycles the B&D and leak lamps begin to flash as a reminder of the automatic cleaning program for the steam generator and piping; holding the select button for five seconds makes both lamps flash, and pressing start then launches the cleaning cycle.

Dental Multimedia Demonstration System JG-S5-SJ

The JG-S5-SJ dental multimedia demonstration system transmits dental operating video in real time at high definition, supports two-way audio and video interaction between instructors and students, and provides recording and archiving. It is suited to dental practical training because it shows clinical operating details directly, so instructors can explain the key points of each procedure while demonstrating.

YOU98(P) Mobile High-frequency Dental X-ray Unit

The YOU98(P) mobile high-frequency dental X-ray unit uses Korean-made circuit components with high-frequency closed-loop control, so a low battery does not degrade image quality. A Japanese Canon micro-focus tube with a 0.4mm focal spot and 12.5° anode angle gives clearer radiographs. Exposure takes about 0.4s, reducing dose and limiting the effect of hand tremor; the unit is small and light enough for single-handed exposure, has a digital display, and a full battery lasts 150 exposures. Tube voltage 70kV ±10%, tube current 2mA ±20%, total weight 1.7kg.

LINDAR Built-In Washer-Disinfector

The LINDAR uses a fully built-in design that integrates completely into the side cabinet, reducing the space taken from a separate cleaning worktop and improving utilisation. A large 550 x 450 x 450 mm chamber handles a wide range of instruments and greatly raises throughput. A colour touch display with an acrylic panel is easy to clean and gives high-brightness readings of each stage and temperature. The complete cleaning sequence — pre-wash, main wash, rinse, final rinse, disinfection and drying — is built in and follows the medical instrument reprocessing flow, with an additional drying program so instruments are not removed wet. Selectable programs include intensive (with disinfection and drying) at 80 minutes, standard at 60 minutes, eco at 55 minutes and fast at 30 minutes.

SUPER05 Dental Diagnostic X-ray Unit

The SUPER05 dental diagnostic X-ray unit has a tube voltage of 70kV ±10% and tube current of 2mA ±20%, accepts 100-240V input at 50-60Hz, and uses a Canon (Toshiba) X-ray tube with a 12.5° anode angle and 0.4mm focal spot. Exposure times range from 0.04s to 2.0s, leakage radiation is 0.25mGy/h at one metre, and the unit weighs 1.9kg.

DGZ-4L Water Distiller

This unit produces distilled water and is intended for medical institutions, hydrosol production, laboratories, battery plants, household use and beauty salons. It includes a bamboo-charcoal filter pack and uses a high-grade stainless steel inner tank and water outlet, with simple and safe operation. It offers high output, dual temperature-control protection, continuous production and easy cleaning. Rated voltage is 220 VAC 50 Hz or 110 VAC 60 Hz, rated power 750 W, capacity 4 L, distillation rate 1 L per hour, and the inner chamber measures 180 x 200 mm.

DGT-B Series Pre-Vacuum Table-Top Steam Sterilizer (DGT-8B/12B/18B/23B)

The DGT-B series table-top sterilizer uses pre-vacuum cycles and comes in 8 L, 12 L, 18 L and 23 L chamber sizes. It has an LCD display, meets the European Class B standard with triple pre-vacuum pulses, and is fully automatically controlled by a microprocessor. An electronic safety door interlock, automatic fault detection and a high-altitude adaptive system for automatic barometric calibration are included. Nine preset programs plus three test programs and a standard test port are provided; a built-in independent steam generator supplies saturated steam quickly and steadily, and a built-in printer and USB function are standard, with water-quality testing available as an option.

Single-Position Electric Dental Teaching Simulator JG-A15

The JG-A15 single-position electric dental teaching simulator is equipped with a marble worktop, storage space, a stowable simulated human head model, two-position height memory and a six-LED shadowless lamp; it can be used independently or combined with a workbench and suits training room configurations in dental schools and institutions. The stowable head model folds away at the touch of a button for easy tidying after class, the two height memory positions reduce repeated adjustment, and the six-LED shadowless lamp lights the training area.

Feiyue BES-16L-B-LED Steam Sterilizer

The Feiyue (BES-16L-B-LED) is a touch-controlled steam sterilizer operated by light-touch keys. Its six-layer chamber structure is formed in one piece from imported 304 stainless steel for all-round sterilization. After every 100 cycles the B&D and LEAK lamps on the control panel flash together to prompt the automatic cleaning routine; holding SELECT for five seconds and then pressing START starts the cleaning cycle to extend service life. A fast USB port stores 2,000 cycle records for download and review or printing on a computer, and a printer is available as an option.

YOU(M) Mobile Line-frequency Dental X-ray Unit

The YOU(M) mobile line-frequency dental X-ray unit uses a Canon radiation generator made in Japan, and its spring-loaded mobile arm is designed for greater stability and a longer service life. Supply is AC 220V ±10% at 50/60Hz, maximum power 900VA, focal spot 0.7mm, tube voltage 70kV ±10%, anode current 7mA ±15%, anode angle 16°, duty cycle 1/60, half-value layer 1.6mm Al at 70kV, inherent filtration ≥0.5mm Al and leakage radiation <0.07mGy/h at one metre.

TRIOS-11 Intraoral Scanner 3.0

The TRIOS-11 intraoral scanner 3.0 has an easily detachable scan tip in a slim, modern housing with an aluminium screw-in cable end, supports AI-assisted fast impression taking and renders more realistic 3D models. The handpiece measures 200×58×36mm and captures by continuous optical video at a working distance of 0-17mm, with accuracy of ≤10-12μm per tooth and ≤28-30μm for a full arch, 3D video synchronisation, and STL, PLY (true colour) and OBJ output. Handpiece weight 240g, working life over 30,000 hours.

DGL-X Series Vertical Sterilizer with Internal-Circulation Drying (DGL-35X/50X/75X/100X)

The DGL-X series vertical sterilizer combines sterilization with a drying function and is available in 35 L, 50 L, 75 L and 100 L chambers. Its internal steam-circulation system discharges no steam to the room, keeping the working environment clean and dry. A handwheel horizontal-slide structure, high-grade stainless steel and a self-expanding seal are used, with microprocessor control of the sterilization parameters, a digital display with touch keys, a safety interlock and a standard test port. Automatic protection covers over-temperature, over-pressure, low water level and dry-burn; a stainless steel inner vessel or basket is fitted, cold air and steam are discharged automatically, and a buzzer reminder with automatic shutdown ends the cycle. An external printer and automatic water filling are optional.

TANZO T3/T4 Table-Top Steam Sterilizer

The TANZO T3/T4 is a European Class B pre-vacuum pressure steam sterilizer available with 18 L and 23 L chambers. It has a full-colour touch screen through which all operations are carried out, and the screen precisely displays sensor-monitored chamber temperature, pressure readings, sterilization time, distilled and waste water tank levels and water quality information. The sterilizer also provides test programs, user-definable sterilization programs and preset functions, and uses dual built-in temperature sensors for more precise monitoring of sterilization temperature.