Produtos
Produtos publicados por fabricantes dentários da China. Abra um produto para ver as especificações, as imagens e o fornecedor responsável. · 2679
Bracket Removing Pliers
The bracket removing pliers are used to remove anterior brackets, with tip hardness of HRC 50-55. The narrow sharp tips enable access between the edges of the bracket base and tooth surface to remove direct bond brackets safely and comfortably. Size standard, packed 1 pc/pk, made of medical stainless steel with a highly polished finish for aesthetics and corrosion resistance. They feature fine grinding and polishing, a special non-clearance hinge, ergonomic design with arc edge and handcrafted precise dimensions.
Preço sob consultaZhejiang Youou Medical Technology Co., Ltd.
Power Chains (open long / closed continuous / open short)
Power chains work with braces to apply more force, close gaps between the teeth, and increase treatment efficiency considerably. Types include open long, closed continuous and open short, for space closure and alignment control during orthodontic treatment.
Preço sob consultaZhejiang Youou Medical Technology Co., Ltd.
Gusrom 3D PRO ML Premium Zirconia Block-For mass dental bridge production
3D PRO ML Premium zirconia block is possessed of 800-1200 MPa of bending strength. 3D PRO ML Premium bring versatility with various restoration type, such as onlay, full-arch crown bridge, full crown bridge and so on. Gusrom use the crack control technology to minimize the possibility of breaking during processing 3D PRO ML Premium. This feature reduces the rework rate of dental labs and boosts the efficiency of dentures production.
Preço sob consultaShenzhen Gusrom Biotechnology Co., Ltd.
Distal End Cutter (short / long handle)
Orthodontic cutters are used for holding, bending, cutting and removing in orthodontic treatment; the distal end cutter is suitable for cutting arch wire up to 0.5 mm in diameter or 0.019" x 0.025" in section. It is available with a short handle (118 x 50 mm) or a long handle (135 x 54 mm); package size 175 x 80 x 20 mm. It consists of jaws, a joint and handles, usually made of stainless steel, and is reusable, with a 24-month warranty service.
Preço sob consultaHangzhou ALS DentalAppliance Co., Ltd
Rahor CR99 Air-blowing Mouth Mirror
The Rahor air-blowing mouth mirror blows a continuous stream of air through a blowing hole so that the mirror surface stays clear during treatment, which addresses the fogging that dentists report when working in the mouth. It uses a proprietary wide-area fluid control technology in which a very small air flow covers 100% of the mirror surface, so the air does not disturb the working field. A double-joint design allows the head to rotate through 360 degrees so the mirror can be set to almost any angle needed.
Preço sob consultaBeijing Ruihao Medical Technology Co., Ltd.
XTG136-M4-T1
XTG136-M4-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Preço sob consultaFoshan Xunteng Medical Technology Co., Ltd
Gusrom SHT ML Multilayer zirconia blocks-for Complex Restorations
Gusrom SHT ML Multilayer zirconia block is a dental digital solution for comprehensive restorations. Work with SHT ML zirconia blocks, it brings ease to create complex prostheses, such as veneer, onlay, anterior crown, posterior crown and full crown bridge. The bending strength of SHT ML zirconia block is over 900 MPa, which is durable for daily using. 6-layers colors with gradient mimicking real teeth makes SHT ML restorations more natural.
Preço sob consultaShenzhen Gusrom Biotechnology Co., Ltd.
Dental Teaching Training Head Model JG-C8
The JG-C8 dental teaching head model combines a stainless steel fixing clamp with a universal joint. The stainless steel clamp fits the mounting posts of different dental chairs, so it can be fixed easily with minimal handling for dental hands-on practice, allowing a training position to be set up quickly on existing chairs.
Preço sob consultaFoshan Jingle Medical Equipment Co., Ltd
XTG66-M4/B2-T1
XTG66-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Preço sob consultaFoshan Xunteng Medical Technology Co., Ltd
Sensor (Blue)
The blue sensor offers a spatial resolution of 25 line pairs per millimetre and 16-bit, 65,535-level greyscale. It is rated IP68 for immersion disinfection, uses an APS CMOS detector with a CsI scintillator, 20μm pixels and a standard 3-metre cable, and runs on Windows 7 or later in 32/64-bit versions.
Preço sob consultaNINGBOYOUJOY DENTALEQUIPENT
Bracket Positioning Gauge (rod type)
The bracket positioning gauge is used to position brackets before bonding in orthodontic treatment; by shape and method of use it is divided into cross type and rod type. Rod-type sizes are A: 130 x 8 mm, B: 130 x 11 mm and C: 130 x 13 mm. It is made of stainless steel, supplied non-sterile and reusable, with a surface roughness Ra of 0.1 micrometre or less, and a 24-month warranty service. During use the patient gently bites the base plate and the bracket is bonded just above the indicated position.
Preço sob consultaHangzhou ALS DentalAppliance Co., Ltd
SCAN-i5 Intraoral Scanner
The SCAN-i5 intraoral scanner connects over wired USB 3.0. Its handpiece measures 243 x 40 x 32 mm and weighs 160 g without the cable, with a 25 mm depth of field; imaging uses continuous optical video capture with synchronised 3D video display. Three standard tips, one mini tip and one protective tip are supplied, with scan areas of 16 x 14 mm standard and 12 x 10 mm mini. Quick reset and model optimisation are supported, output formats are STL, PLY (true colour) and OBJ, working life exceeds 30,000 hours with an eight-year product life, anti-fogging is by air cooling, and a calibration tip set is optional.
Preço sob consultaNINGBOYOUJOY DENTALEQUIPENT
Standard Push-Button Four-Spray Handpiece (Self-Illuminating)
The self-illuminating standard push-button four-spray handpiece features four-point water spray, an anti-retraction design, a standard head and 4-hole/2-hole connections compatible with NSK, in the standard high-speed series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Preço sob consultaFoshan Xunteng Medical Technology Co., Ltd
Applicator Sticks and Cotton Swabs
Applicator sticks are used mainly to apply adhesives, disinfectants and other agents. They come in several types, including single-use and multi-use versions, for a specific field or for different conditions and sites. Shapes vary as well, with straight, bent and pointed forms so that the stick can follow the area being treated. Cotton swabs are supplied in the same category for routine application and cleaning in the clinic. The manufacturer positions the range as a consumable for daily chairside work rather than as a single fixed specification item.
Preço sob consultaDongguan Haolida Dental Equipment Co., Ltd.
iPD Lingchi Intelligent Removable Framework Design Software
iPD Lingchi is an intelligent design software for removable partial denture frameworks, presented as making framework design faster, more varied and simpler. It was developed by Nanjing Profeta together with the Peking University School of Stomatology and is described as the first domestically developed framework design software of its kind. Based on artificial intelligence, it provides a doctor assistant that recommends several design options and enables digital tooth arrangement, processing and printing. A texture scanning and drawing function supports textured models and is described as helping laboratories move framework work from manual wax patterns to digital design. Team collaboration runs on SaaS cloud services with group management for remote and cross-region work, and design quality is kept stable under experienced senior technicians.
Preço sob consultaNanjing Qianzhi Intelligent Technology Co., Ltd.