Model Resin for 3D Printing

وصف المنتج

This model resin for 3D printing needs no stirring before use, which saves a substantial amount of printing time. The material is stable and does not deform easily after post-curing. Shrinkage is low, so printed models are accurate: the shrinkage of the cured model is 6.3 percent. The printed surface has a good texture and high hardness, with a Shore hardness of 78D to 82D after curing. Printing is fast and efficient, taking about 35 minutes for a model 2 cm high. The material has little odour and is safe, rated grade 2 in an odour assessment carried out according to HG/T 4065-2008. Flexural modulus 1203.3 MPa, flexural stress 71.2 N, flexural strength 48.6 MPa.