Dental Equipment

ENROLL-01 Air Compressor

The ENROLL-01 air compressor serves one treatment position and one dental unit, with 300 litres per minute of suction, a maximum vacuum of -37 kPa and a vacuum adjustment range of 3.7-4.4A. Motor power is 550W at 3,440 rpm, the intake pipe is 32mm, rated current is AC230V at 50-60Hz, net weight is 32kg and dimensions are 330×540×620mm.

DRINK 10+

WODO A1/A2 (Magpie) Dental Unit

The WODO A1/A2 corresponds to the Magpie dental unit on the site, positioned as a basic dental chair that is described as simple but not simplistic: it concentrates on the core, high-frequency needs of the customer and removes complex functions so that the basic functions stay stable, excellent and adaptable. The exterior is streamlined with abundant rounded elements, and the side panels are shaped like a bird, blending natural forms with modern industrial design. Stability is the theme: a two-joint rotating assistant control mechanism is provided for four-handed clinical work, and the balanced arm and instrument tray pivot points are aligned with the centre of gravity of the chair frame to strengthen stability and independence. The self-developed operating light adjusts continuously from 3,000 to 50,000 lux at 4,000 to 5,700 K, can switch between white and warm light, offers both manual and sensor control, and has a removable handle for separate sterilization. A 12-key classic control panel and a two-pedal foot switch complete the unit.

DGT-A Series Thermal Vacuum Table-Top Steam Sterilizer (DGT-18A/DGT-23A)

The DGT-A series table-top steam sterilizer is a thermal-vacuum model offered in 18 L and 23 L chambers. It uses a high-grade stainless steel chamber with a sealing lid, microprocessor control that allows the sterilization temperature to be set freely at 121 °C or 134 °C, and touch-button operation. A standard test port is provided, and the built-in steam generator delivers saturated steam quickly. Automatic protection covers over-temperature, over-pressure, low water level and dry-burn conditions, making the unit simple and safe to operate; it is built to the European Class N standard.

US980 Intraoral Sensor

The US980 intraoral sensor uses a CMOS chip with an industrial-grade microfiber panel, high-resolution X-ray conversion and advanced AD guidance to reproduce true tooth images, so even fine apical bifurcations are easy to find. The cable is replaceable, the sensor can be soaked in disinfectant to IPX7, helping avoid cross-infection, and it works with almost every brand of X-ray unit on the market. Chip type CMOS APS, GOS scintillator, 27.5×38.5mm body, 22.5×30mm active area, 18.5μm pixels and 1.9M (1600×1200) image pixels.

Single-Position Electric Dental Teaching Simulator JG-A15

The JG-A15 single-position electric dental teaching simulator is equipped with a marble worktop, storage space, a stowable simulated human head model, two-position height memory and a six-LED shadowless lamp; it can be used independently or combined with a workbench and suits training room configurations in dental schools and institutions. The stowable head model folds away at the touch of a button for easy tidying after class, the two height memory positions reduce repeated adjustment, and the six-LED shadowless lamp lights the training area.

DGT-Z Series Automatic-Door Pre-Vacuum Table-Top Sterilizer (DGT-18Z/23Z/45Z/50Z)

The DGT-Z series is an automatic-door pre-vacuum table-top sterilizer with 18 L, 23 L, 45 L and 50 L chamber options. It has a 4.7-inch full-colour LED touch screen, an automatic door opening and closing mechanism and an electronic safety door interlock, and meets the European Class B standard with an adjustable 1 to 6 pre-vacuum pulses. Microprocessor control runs the full cycle automatically with automatic fault detection, and a high-altitude adaptive system calibrates barometric pressure. Five preset programs, three test programs and a standard test port are built in, comprehensive automatic protection and an emergency stop are provided, and the unit gives a buzzer reminder and stops automatically at the end of sterilization; a built-in steam generator, built-in printer and USB function complete the configuration.

LINDAR Built-In Washer-Disinfector

The LINDAR uses a fully built-in design that integrates completely into the side cabinet, reducing the space taken from a separate cleaning worktop and improving utilisation. A large 550 x 450 x 450 mm chamber handles a wide range of instruments and greatly raises throughput. A colour touch display with an acrylic panel is easy to clean and gives high-brightness readings of each stage and temperature. The complete cleaning sequence — pre-wash, main wash, rinse, final rinse, disinfection and drying — is built in and follows the medical instrument reprocessing flow, with an additional drying program so instruments are not removed wet. Selectable programs include intensive (with disinfection and drying) at 80 minutes, standard at 60 minutes, eco at 55 minutes and fast at 30 minutes.

Mobile Cart 2

DGLS-B Series Bolt-Type Digital Vertical Steam Sterilizer (35 L to 150 L)

The DGLS-B series is a bolt-clamped, digitally controlled vertical steam sterilizer offered in six sizes from 35 L to 150 L. It is built from high-grade stainless steel, uses microprocessor control with adjustable sterilization parameters, and provides a digital display with mechanical keys, a standard test port and a stainless steel inner vessel or basket. Automatic protection covers over-temperature, over-pressure self-release, low water level and dry-burn; cold air is evacuated automatically, steam is released automatically at the end of the cycle, and a buzzer reminder together with automatic shutdown completes the run.

DGT-B Series Pre-Vacuum Table-Top Steam Sterilizer (DGT-8B/12B/18B/23B)

The DGT-B series table-top sterilizer uses pre-vacuum cycles and comes in 8 L, 12 L, 18 L and 23 L chamber sizes. It has an LCD display, meets the European Class B standard with triple pre-vacuum pulses, and is fully automatically controlled by a microprocessor. An electronic safety door interlock, automatic fault detection and a high-altitude adaptive system for automatic barometric calibration are included. Nine preset programs plus three test programs and a standard test port are provided; a built-in independent steam generator supplies saturated steam quickly and steadily, and a built-in printer and USB function are standard, with water-quality testing available as an option.

Dental Multimedia Demonstration System JG-S5-SJ

The JG-S5-SJ dental multimedia demonstration system transmits dental operating video in real time at high definition, supports two-way audio and video interaction between instructors and students, and provides recording and archiving. It is suited to dental practical training because it shows clinical operating details directly, so instructors can explain the key points of each procedure while demonstrating.

DGL-X Series Vertical Sterilizer with Internal-Circulation Drying (DGL-35X/50X/75X/100X)

The DGL-X series vertical sterilizer combines sterilization with a drying function and is available in 35 L, 50 L, 75 L and 100 L chambers. Its internal steam-circulation system discharges no steam to the room, keeping the working environment clean and dry. A handwheel horizontal-slide structure, high-grade stainless steel and a self-expanding seal are used, with microprocessor control of the sterilization parameters, a digital display with touch keys, a safety interlock and a standard test port. Automatic protection covers over-temperature, over-pressure, low water level and dry-burn; a stainless steel inner vessel or basket is fitted, cold air and steam are discharged automatically, and a buzzer reminder with automatic shutdown ends the cycle. An external printer and automatic water filling are optional.

Dental Teaching Training Head Model JG-C6-3

The JG-C6-3 dental teaching head model comes with a headrest fixing strap and is attached to the headrest of a dental chair for hands-on practice. Because the strap tension is adjustable it fits most dental chair headrests, and the simple head-model design saves considerable space. The model can also be adjusted up and down and left and right, making it convenient for different students to practise in a realistic chair position.

SCAN11 Intraoral Scanner

The SCAN11 intraoral scanner weighs 210 g, measures 240 x 49.5 x 30.5 mm and scans at a distance of 0 to 15 mm. It uses continuous optical video capture with synchronised 3D video imaging at 15 frames per second, an LED light source and a 13 x 13 mm field of view. Accuracy is 10 micrometres or better for a single crown, 15 micrometres for a single arch and 20 micrometres for a full arch. Standard and mini tips give scan areas of 15 x 15 mm and 12 x 12 mm with 15 mm depth of field, and the scan tip can be autoclaved 100 times (121 °C for 16 minutes, 134 °C for 3.5 minutes). Scanning takes 30 seconds per arch and 90 seconds for a full arch with occlusion; service life exceeds 30,000 hours and exports are in STL, PLY and OBJ.