Productos

Straight-wire Orthodontic Band (size 16#-39#)

Bands are used together with brackets for orthodontic correction of irregular tooth alignment. According to band circumference, sizes range from 16# to 39#, 24 sizes in total. Before use, sterilize at high temperature (105 degrees C) and high pressure (2.1 bar), then clean, disinfect, isolate and dry the tooth to be banded. Select a suitable high-quality adhesive and bond the band to the tooth per its instructions, removing excess adhesive after positioning and curing. Shelf life and warranty are both 36 months.

Torquing Pliers

Used for bending square wire or forming torque; usually used in pairs, and the arch wire bent should generally not exceed 0.56 x 0.71 mm. Orthodontic pliers are used for holding, bending, cutting and removing during orthodontic treatment. The instrument consists of jaws, a joint and handles, with jaws shaped for different purposes; it is usually made of stainless steel and reusable. Product size 123 x 54 mm, package size 175 x 80 x 20 mm, 24-month warranty service.

Pediatric Handpiece (Push-Button / Latch)

The pediatric handpiece (push-button or latch chuck) features a small head and NSK-compatible connection in the standard high-speed series; a self-illuminating version is also listed. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

20:1 Mini Push-Button Electric Contra-Angle Head XTD403

The XTD403 is a 20:1 reduction mini push-button electric contra-angle head for dental electric motors, with a speed of 100-450 min-1 and torque of 0.4-4.0 Ncm as listed in the official table. Please refer to the official product page and the manufacturer for the complete specification list.

Measuring Cup

FX External-Water Air Motor (4-Hole / 2-Hole)

The FX external-water air motor is a low-speed dental air motor in the FX external-water series, available with 4-hole and 2-hole connections.The official page lists the following specifications: Spray: 外喷水; Chuck type: 旋转式; Speed: 25,000Rpm/mins; Speed ratio: 1:1 直接驱动; Noise: ≤68dB; Air pressure: 0.25(Mpa)-0.3(Mpa); 适用毛刺: Φ2.34-Φ2.35mm; Connection: 2孔/4孔. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

DGL-B Series Digital Vertical Steam Sterilizer (DGL-35B/50B/75B/100B)

The DGL-B series is a digital vertical steam sterilizer in 35 L, 50 L, 75 L and 100 L sizes. It uses a handwheel horizontal-slide structure and high-grade stainless steel with a self-expanding seal, and a microprocessor automatically controls the sterilization parameters. A digital display with mechanical keys, a safety interlock and a standard test port are provided. Automatic protection covers over-temperature, over-pressure self-release, low water level and dry-burn; a stainless steel inner vessel or basket is included, cold air is evacuated automatically, steam is released automatically at the end of the cycle, and a buzzer reminder and automatic shutdown are provided. Automatic water filling is available as an option.

SUPER05 Dental Diagnostic X-ray Unit

The SUPER05 dental diagnostic X-ray unit has a tube voltage of 70kV ±10% and tube current of 2mA ±20%, accepts 100-240V input at 50-60Hz, and uses a Canon (Toshiba) X-ray tube with a 12.5° anode angle and 0.4mm focal spot. Exposure times range from 0.04s to 2.0s, leakage radiation is 0.25mGy/h at one metre, and the unit weighs 1.9kg.

Dental Teaching Training Head Model JG-C6-1

The JG-C6-1 dental teaching head model is a simple yet versatile model for dental practice. It has a simplified face skin and a dental model with articulator, which makes it easier to carry. The stainless steel bracket allows the head model to be adjusted in angle and height both left and right, and the enlarged clamp lets different individuals practise in a range of settings.

Meijie A7000 Alginate Impression Material

Meijie A7000 is a high-precision, dust-free universal alginate impression material with excellent elasticity and tear resistance, a stable hypoallergenic formula, high flow and easy mixing, good biocompatibility and plaster compatibility, and very high compressive strength and elastic recovery. Shelf life 6 years, mint flavour, pink colour; mixing time 35 seconds, working time 1 min 40 s, in-mouth setting time 80 seconds and total time 3 min 35 s.

45° Push-Button Handpiece

The 45° push-button handpiece is intended for angled impacted-tooth extraction, with a standard head, push-button chuck, 4-hole and 2-hole connections and NSK compatibility; fiber-optic and self-illuminating versions are also listed. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Single-Flute Aluminum End Mill, High-Gloss Precision Carbide Flat Cutter

Single-flute high-gloss end mill for aluminium made of premium tungsten carbide at HRC62 hardness, with a single-flute design that leaves a large chip space. The full-edge anti-vibration geometry produces a smoother surface, the large chip groove speeds chip evacuation and raises productivity, and precision grinding on an imported ANCA grinder gives high accuracy with a sharp edge that does not stick and leaves no tool marks. It suits aluminium machining and high-speed aluminium cutting with a flat, bright finish, and works on copper alloy, aluminium alloy, magnesium alloy, acrylic, wood and other non-ferrous materials on high-speed equipment such as CNC machining centres.

DGT-Z Series Automatic-Door Pre-Vacuum Table-Top Sterilizer (DGT-18Z/23Z/45Z/50Z)

The DGT-Z series is an automatic-door pre-vacuum table-top sterilizer with 18 L, 23 L, 45 L and 50 L chamber options. It has a 4.7-inch full-colour LED touch screen, an automatic door opening and closing mechanism and an electronic safety door interlock, and meets the European Class B standard with an adjustable 1 to 6 pre-vacuum pulses. Microprocessor control runs the full cycle automatically with automatic fault detection, and a high-altitude adaptive system calibrates barometric pressure. Five preset programs, three test programs and a standard test port are built in, comprehensive automatic protection and an emergency stop are provided, and the unit gives a buzzer reminder and stops automatically at the end of sterilization; a built-in steam generator, built-in printer and USB function complete the configuration.

N-Series Inner-Channel Air Motor (2-Hole / 4-Hole / 6-Hole Fiber-Optic)

The N-series inner-channel air motor is a low-speed dental air motor in the inner-channel low-speed handpiece category, available with 2-hole, 4-hole and 6-hole fiber-optic connections. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Instrument Cleaning Box

The cleaning box is made of polymer material with a stable structure that resists ageing, offering a convenient solution for instrument cleaning in clinics, dental laboratories and similar settings. An ergonomic carrying handle allows secure transport, while the specially shaped drain channel ensures complete drainage and prevents instruments from tangling or catching. Dimensions 315×220×135mm, net weight 1kg.