Productos

Standard Push-Button Three-Spray Handpiece

The standard push-button three-spray handpiece uses three-point spray atomization with air-water separation and a standard head, part of the standard high-speed handpiece series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Feiyue BES-16L-B-LED Steam Sterilizer

The Feiyue (BES-16L-B-LED) is a touch-controlled steam sterilizer operated by light-touch keys. Its six-layer chamber structure is formed in one piece from imported 304 stainless steel for all-round sterilization. After every 100 cycles the B&D and LEAK lamps on the control panel flash together to prompt the automatic cleaning routine; holding SELECT for five seconds and then pressing START starts the cleaning cycle to extend service life. A fast USB port stores 2,000 cycle records for download and review or printing on a computer, and a printer is available as an option.

Push-Button Contra-Angle (External Water)

The push-button contra-angle is a low-speed dental handpiece offered in 4:1, 16:1, 20:1 and 64:1 ratios, with an external-water version in the same series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

XTG221-M4/B2

XTG221-M4/B2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; 噪sheng: ≤68dB.

Collagen Sponge (Collagen Matrix Flap)

Mainly used for augmentation of various oral soft tissues, alveolar ridge reconstruction, enlargement of the local gingiva to increase keratinized tissue around teeth and implants, guided tissue regeneration for covering recessed/atrophic root defects, and gingival coverage of extraction sockets. Made from type I collagen extracted from healthy bovine Achilles tendon by freeze-drying, it is a white porous absorbable collagen sponge for oral use, supplied sterile and for single use only, with good histocompatibility and complete absorbability.

Reverse-pull Headgear / Face Mask (rod type)

The reverse-pull headgear (face mask) is used by orthodontists as an auxiliary device when correcting the human dentition, and is available in adjustable and rod types. It consists of a chin cup, a forehead pad and metal connectors, with a product size of 225 x 88 mm. Metal parts are made of austenitic stainless steel 12Cr18Ni9 and plastic parts of ABS; the traction hook must withstand a pull of no less than 10 N with the screw tightened. Traction force is generally 500-1000 g and can be adjusted to the patient age and tolerance; shelf life and warranty are both 36 months.

Bone Saw Handpiece DGZ-R

The DGZ-R bone saw handpiece is indicated for bone-cutting procedures in orthopedics, veterinary medicine, ENT and oral-maxillofacial surgery, with a 3.2:1 transmission ratio, a 1.8 mm stroke and a frequency of 12,500 strokes per minute.The official page lists the following specifications: Transmission ratio: 3.2 : 1; Stroke / angle: 1.8 mm; Frequency (strokes/min): 12,500; Max drive speed: 40,000 min-1.

XTG8-M4/B2-T1

XTG8-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

45° Angled Extraction Fiber-Optic Handpiece LDNP142

The LDNP142 45° angled extraction fiber-optic handpiece has inner-channel four-hole water spray and push-button chuck; the page lists Φ1.59-1.6 mm burs, clamping force above 4.0 kg, 200,000 rpm max speed, a 1:4.2 gear ratio and 0.3 MPa driving pressure, usable with air or electric motors.

4:1 Polishing Contra-Angle DPG41-FX

The DPG41-FX 4:1 polishing contra-angle is a low-speed dental handpiece for polishing, listed by the manufacturer in 4:1, 10:1, 16:1 and 64:1 ratios. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Aluminum Ball Nose 2-Flute End Mill, Rainbow-Coated Solid Carbide R-Type Ball Cutter

Rainbow-coated two-flute ball nose end mill made of premium tungsten carbide. The ball-nose R corner is used for curved profiling and finishing; the cutter is sharp and tough with a long service life and leaves a smooth surface without tool marks, and each tool is ground on an imported ANCA five-axis grinder with a high-gloss mirror finish. It suits copper alloy, aluminium alloy, magnesium alloy, acrylic, wood and other non-ferrous materials, and is used on high-speed machines such as CNC machining centres, engraving machines and precision engravers. Standard sizes are listed as cutting diameter x R corner x flute length x shank diameter x overall length, for example 3 x R1.5 x 8 x d4 x 75, 1.5 x R0.75 x 3 x d4 x 50, 4 x R2 x 10 x d4 x 75 and 6 x R3 x 12 x d6 x 75.

Pediatric Handpiece (Push-Button / Latch)

The pediatric handpiece (push-button or latch chuck) features a small head and NSK-compatible connection in the standard high-speed series; a self-illuminating version is also listed. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Water Dosing Bottle

Meijie A7000 Alginate Impression Material

Meijie A7000 is a high-precision, dust-free universal alginate impression material with excellent elasticity and tear resistance, a stable hypoallergenic formula, high flow and easy mixing, good biocompatibility and plaster compatibility, and very high compressive strength and elastic recovery. Shelf life 6 years, mint flavour, pink colour; mixing time 35 seconds, working time 1 min 40 s, in-mouth setting time 80 seconds and total time 3 min 35 s.

DGS-29K Series Portable Digital Automatic Steam Sterilizer (18K/24K/29K)

The DGS-29K series is a portable, digitally controlled automatic sterilizer (K type, quick-opening automatic) covering 18 L, 24 L and 29 L chamber sizes. Maximum working pressure is 0.142 MPa and the rated working temperature is 126 °C, settable within the range of 115 °C to 126 °C. It is intended for ambient temperatures from +5 °C to +40 °C, relative humidity not above 85 percent and atmospheric pressure from 70 kPa to 106 kPa, and runs on (220 ± 22) V, (50 ± 1) Hz AC power. Upper and lower handles with a quick-turn sealing connection make the unit convenient to operate.