Produits

RAY68(W)

CW-PA Nickel-Chromium Alloy for Porcelain-Veneered Crowns and Bridges

Composition Nickel, chromium, molybdenum and silicon with minor noble-metal additions; beryllium-free, vacuum-melted and refined. Indications Type 0–3 porcelain-veneered and metal crowns and bridges. Key features 1. Beryllium- and cadmium-free: good corrosion and tarnish resistance, and no beryllium dust exposure for technicians. 2. Biocompatibility tested by a laboratory recognised by NMPA. 3. A proprietary formulation gives stable, reliable metal-ceramic bonding with a wide range of porcelains. 4. Moderate strength and hardness with good ductility — easy to grind, and long-span bridges resist deformation. 5. Vacuum melting and refining greatly reduce gas bubbles and porcelain cracking during firing.

KND/CW-NP Nickel-Chromium Alloy for Porcelain-Veneered Crowns and Bridges

Composition Nickel, chromium, molybdenum and silicon with minor noble-metal additions; beryllium-free, vacuum-melted and refined. Indications Type 0–3 porcelain-veneered and metal crowns and bridges. Key features 1. Biocompatibility tested by a laboratory recognised by NMPA. 2. A proprietary formulation gives stable, reliable metal-ceramic bonding with a wide range of porcelains. 3. Good strength and hardness with adequate ductility — easy to grind, and long-span bridges resist deformation. 4. Vacuum melting and refining greatly reduce gas bubbles and porcelain cracking during firing.

KND/CW-KZ Cobalt-Chromium Alloy for Removable Partial Dentures

Composition Co 51.0±2%, Cr 30.0±2%, Mo 7.0±1%, Ni 10.0±1%, Si 1.1±1%, Mn ≤1.0%, C ≤1.0%; beryllium and cadmium each ≤0.02%. Indications Type 4 and 5 removable partial dentures. Key features 1. Vacuum melting and refining give high purity and a brighter polished surface. 2. High strength and hardness give clasps good spring-back, easy seating and removal. 3. Appropriate ductility keeps clasps adjustable without breaking. 4. Balanced chemistry gives good casting fluidity.

Ceramics and Sealing Components

Inorganic non-metallic ceramic materials and sealing components for dental and industrial applications, including metal-ceramic sealed assemblies. Note Specific grades, parameters and specifications are not published on the manufacturer's website — please contact the supplier.

KND/CW-H Cobalt-Chromium Framework Alloy

Composition Cobalt, chromium, molybdenum and silicon with minor noble-metal additions; nickel-free, vacuum-melted and refined. Indications Hard casting alloy for Type 4 and 5 removable partial denture frameworks. Key features 1. Vacuum melting and refining give excellent biocompatibility. 2. High strength, hardness and elastic modulus produce rigid frameworks and clasps with strong spring-back — known as "high-elastic steel". 3. Appropriate ductility prevents clasps from breaking during adjustment. 4. Stable, reliable casting behaviour for high-frequency or torch melting. 5. Good chemistry for electrolytic polishing.

MAX-1 Standard Handpiece (Push-Button / Latch)

The MAX-1 standard handpiece is a dental high-speed handpiece with single-point water spray, anti-retraction design and standard head, 4-hole/2-hole connections and NSK compatibility, available with push-button or latch chuck. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Bench Turbine Unit XTH204

The XTH204 is a bench turbine (air supply) unit listed with 0.5 MPa working pressure, 0.6 MPa maximum pressure, 72 L/min flow, 0.22-0.32 MPa for high-speed handpieces, 40-45 dB noise and 51×36×43 cm dimensions.The official page lists the following specifications: Air pressure: 0.5 Mpa; Max pressure: 0.6 Mpa; Flow: ;72L/min; High-speed handpiece pressure: 0.22 Mpa; High-speed handpiece pressure: 0.22Mpa 0.32 Mpa; Noise: 40-45dB; Dimensions: 51 x 36 x 43cm; 总重量: 25KG.

K-Series Inner-Channel Air Motor

The K-series inner-channel air motor is a low-speed dental air motor with an inner water channel, in the inner-channel low-speed handpiece category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Carbide Indexable Woodworking Planer Blade FMBDP, Double-Sided/4-Sided Throw-Away Insert

Double-sided and four-sided indexable planer insert, brand Fuma, model FMBDP, made of premium tungsten carbide and intended for edge milling and cutting; sizes can be customized. The inserts are used for woodworking planing and edge milling on particle board, MDF, reclaimed timber, construction formwork and hardwood, with 30 or 35 degree cutting edges. Standard double-sided sizes are 5.5x12x1.5-G4, 7.5x12x1.5-G4, 9.6x12x1.5-G4, 15x12x1.5-G4, 20x12x1.5-G4, 30x12x1.5-G4, 40x12x1.5-G4, 50x12x1.5-G4 and 60x12x1.5-G4; four-sided sizes include 12x12x1.5-C4, 14x14x2.0 and 15x15x2.5, with lengths up to 150 mm.

1:5 Fiber-Optic Speed-Increasing Contra-Angle XTDW312-Y1

The XTDW312-Y1 is a 1:5 speed-increasing contra-angle with fiber-optic illumination, 4-hole inner water cooling and spring-axis push-button chuck; the page lists φ1.595-1.6 mm burs, clamping force above 4.0 kg, 200,000 rpm max speed and 0.3 MPa driving pressure.The official page lists the following specifications: 机器类型: 带有光纤增长曲线的手机; 织针尺寸: φ1.595-1.6mm; Cooling system: 4孔内置水路; 夹持力: 4.0Kg以上; 换针: 压力（弹簧轴）; 最大速度: 200.000rpm; 驱动压力: 0.3MPa; 齿轮比: 1:5.

CAVEX CA38 Precision Alginate Impression Material

CAVEX CA38 is the most advanced precision impression material in the range, a viscous, tough material suited to general dental treatment and orthodontic impressions. Its high elasticity and tear resistance make it ideal for precision impressions with detail down to 25μm; the powder is very fine, giving a smooth bubble-free surface and excellent plaster compatibility. 500g pack, 2-day stability, 25μm accuracy, light blue, non colour-changing, elasticity ++++, mint flavour, 5-year shelf life.

60 Degree 2-Tooth Multi-Function Thread Mill, Drill-Mill Integrated Carbide Cutter

60-degree multi-function two-tooth thread mill with an integrated drill-and-mill design that can drill and thread in one operation. Base material is micro-grain carbide with a Platit nano coating, brand Fuma; the universal round shank clamps firmly without slipping and resists vibration. It machines copper, stainless steel, alloy steel, aluminium parts, aluminium alloy and cast iron on engraving machines and CNC machining centres. Micro-grain carbide is ground on a five-axis machine with 3M wheels for wear resistance, hardness and long life; the new edge design cuts sharply without chipping with stable chip evacuation, and secondary passivation improves corrosion resistance, leaving no tool marks or burrs.

N-Series Push-Button Contra-Angle Head XTD513-D

The XTD513-D is the push-button head component of the N-series contra-angle (including an external-water version), offered in 4:1, 16:1, 20:1 and 64:1 ratios in the reduction contra-angle head category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

DGT-X Series Bottom-Opening Pre-Vacuum Table-Top Sterilizer (DGT-18X/DGT-23X)

The DGT-X series is a bottom-opening pre-vacuum table-top sterilizer available in 18 L and 23 L chambers. It follows the European Class B standard with triple pre-vacuum pulses and features a 4.3-inch full-colour LED display plus an electronic safety door interlock, while the bottom pull-open door design eases loading and unloading. A microprocessor runs the whole cycle automatically with automatic fault detection, and a high-altitude adaptive system performs barometric calibration. Nine preset programs, three test programs and a standard test port are included, the machine is covered by comprehensive automatic protection, and a built-in high-efficiency independent steam generator, built-in printer and USB function are provided, with water-quality testing optional.