Produtos

20:1 Mini Push-Button Electric Contra-Angle Head XTD403

The XTD403 is a 20:1 reduction mini push-button electric contra-angle head for dental electric motors, with a speed of 100-450 min-1 and torque of 0.4-4.0 Ncm as listed in the official table. Please refer to the official product page and the manufacturer for the complete specification list.

Progressive Multi-Taper NiTi Rotary File System (Plus)

The progressive multi-taper NiTi file system comprises SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, #18-#30 diameters, 250-350 rpm speeds, 1.0-3.0 N.cm torque and lengths of 19 mm or 21/25 mm. Please refer to the official product page and the manufacturer for the complete specification list.

COLLIN 20 Ultrasonic Cleaner

The Woson ultrasonic cleaner is boldly designed and built to last. A high-impact injection-moulded ABS housing, sealed tank edges that resist water and chemicals, and capacitive sensor keys give it a long service life. The 2.5 litre and 6.0 litre versions have a horizontal reading panel while the 3.0 litre version has a vertical panel, and all use an AISI 304-18/8 stainless steel tank with rounded corners. The Collin range offers 2.5 L, 3 L and 6 L capacities at 220 V.

BES5L Steam Sterilizer

The BES5L is a small-capacity Class B steam sterilizer with a 5 L chamber measuring 192 x 96 x 300 mm and overall dimensions of 510 x 310 x 330 mm. Rated supply is AC 220 V/50 Hz with 1,800 VA input power, design pressure -0.1/0.3 MPa and design temperature 140 °C. The temperature selection range is 121/134 °C with 0.1 °C display resolution and 1 kPa pressure display resolution; the water tank holds 1 L, maximum water consumption per cycle is 200 mL, net weight is 26 kg against 30 kg gross, and maximum vacuum reaches -92 kPa or lower.

Weingart Pliers

The Weingart plier is used to guide and move the arch wire in and out of placement and to bend the arch wire ends; the bend in the beak facilitates easy grasping of the arch wire and guiding it into buccal tubes. Tip hardness is HRC 50-55, and it is also used to cinch back the distal end of arch wires to avoid injury of soft tissue. It is made of medical stainless steel, standard size, packed 1 pc/pk. Features include reliable and durable construction, fine grinding and polishing, a special non-clearance hinge, ergonomic design with arc edge, handcrafted precise dimensions and imported advanced nanometer alloy technology.

Single-Position Electric Dental Teaching Simulator JG-A15

The JG-A15 single-position electric dental teaching simulator is equipped with a marble worktop, storage space, a stowable simulated human head model, two-position height memory and a six-LED shadowless lamp; it can be used independently or combined with a workbench and suits training room configurations in dental schools and institutions. The stowable head model folds away at the touch of a button for easy tidying after class, the two height memory positions reduce repeated adjustment, and the six-LED shadowless lamp lights the training area.

Ease 02 Dental Treatment Unit

XTG134-M4-T2

XTG134-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

Bench Water Turbine XTH202-1

The XTH202-1 is a bench water turbine unit listed with 0.2-0.4 MPa water supply pressure for dental equipment water supply.The official page lists the following specifications: Water supply pressure: 0.2-0.4Mpa; 可与牙科用手机连接：: l 1支高速手机; 或1支低速手机: l 吸痰器的管子.

Carbide Indexable Woodworking Planer Blade FMBDP, Double-Sided/4-Sided Throw-Away Insert

Double-sided and four-sided indexable planer insert, brand Fuma, model FMBDP, made of premium tungsten carbide and intended for edge milling and cutting; sizes can be customized. The inserts are used for woodworking planing and edge milling on particle board, MDF, reclaimed timber, construction formwork and hardwood, with 30 or 35 degree cutting edges. Standard double-sided sizes are 5.5x12x1.5-G4, 7.5x12x1.5-G4, 9.6x12x1.5-G4, 15x12x1.5-G4, 20x12x1.5-G4, 30x12x1.5-G4, 40x12x1.5-G4, 50x12x1.5-G4 and 60x12x1.5-G4; four-sided sizes include 12x12x1.5-C4, 14x14x2.0 and 15x15x2.5, with lengths up to 150 mm.

Dental Teaching Training Head Model JG-C9

The JG-C9 dental teaching head model is fitted with an adjustable stainless steel slide rail; once the rail is fixed to the workbench, the head model can be adjusted through several heights and rotated 180 degrees laterally. The high-end design is both practical and good looking, and it is used to set head-model posture during dental teaching and training.

Lithium Disilicate C14/B40

StarShine Lithium Disilicate C14/B40 is a premium dental restorative material that combines exceptional strength, durability, and biocompatibility. Ideal for crowns, bridges, and ultra-thin veneers, it withstands daily chewing forces while providing lifelike aesthetics and long-term patient comfort. Exceptional strength for crowns, bridges and ultra-thin veneers, thermal and biocompatible resistance to warping or cracking, and lifelike customizable translucency, shade and luster. Blocks come in C14 18-15-13 mm and B40 40-15-15 mm formats with LT, MT, HT, MO and HO translucency classes.

DGT-X Series Bottom-Opening Pre-Vacuum Table-Top Sterilizer (DGT-18X/DGT-23X)

The DGT-X series is a bottom-opening pre-vacuum table-top sterilizer available in 18 L and 23 L chambers. It follows the European Class B standard with triple pre-vacuum pulses and features a 4.3-inch full-colour LED display plus an electronic safety door interlock, while the bottom pull-open door design eases loading and unloading. A microprocessor runs the whole cycle automatically with automatic fault detection, and a high-altitude adaptive system performs barometric calibration. Nine preset programs, three test programs and a standard test port are included, the machine is covered by comprehensive automatic protection, and a built-in high-efficiency independent steam generator, built-in printer and USB function are provided, with water-quality testing optional.

XTG140-M4-T2

XTG140-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; Speed ratio: φ1.59mm-φ1.60mm; Noise: ≤68dB.

4:1 Polishing Contra-Angle DPG41-FX

The DPG41-FX 4:1 polishing contra-angle is a low-speed dental handpiece for polishing, listed by the manufacturer in 4:1, 10:1, 16:1 and 64:1 ratios. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.