Produtos

Full-shade Detector

The full-shade detector uses multiple algorithms and can take more than 2,000 measurements on a full charge. Its built-in rechargeable lithium battery reaches 4.2V when full with a 1500mAh capacity, charges through a TYPE-C port at DC-5V and 1A, and is rated for more than 5,000 charging cycles.

Single-Flute Aluminum End Mill, High-Gloss Precision Carbide Flat Cutter

Single-flute high-gloss end mill for aluminium made of premium tungsten carbide at HRC62 hardness, with a single-flute design that leaves a large chip space. The full-edge anti-vibration geometry produces a smoother surface, the large chip groove speeds chip evacuation and raises productivity, and precision grinding on an imported ANCA grinder gives high accuracy with a sharp edge that does not stick and leaves no tool marks. It suits aluminium machining and high-speed aluminium cutting with a flat, bright finish, and works on copper alloy, aluminium alloy, magnesium alloy, acrylic, wood and other non-ferrous materials on high-speed equipment such as CNC machining centres.

Bone Saw Handpiece DGZ-O

The DGZ-O bone saw handpiece is indicated for bone-cutting procedures in orthopedics, veterinary medicine, ENT and oral-maxillofacial surgery, with a 3.4:1 transmission ratio, a 12° stroke angle and a frequency of 11,800 strokes per minute.The official page lists the following specifications: Transmission ratio: 3.4 : 1; Stroke / angle: 12°; Frequency (strokes/min): 11,800; Max drive speed: 40,000 min-1.

1:5 Fiber-Optic Inner-Channel Contra-Angle LDNP15

The LDNP15 1:5 fiber-optic inner-channel contra-angle is a speed-increasing handpiece with inner-channel four-hole water spray and push-button chuck, 0.3 MPa driving pressure and compatibility with air or electric motors; an external-water version of the fiber-optic contra-angle is also listed.

Dental Teaching Training Head Model JG-C8

The JG-C8 dental teaching head model combines a stainless steel fixing clamp with a universal joint. The stainless steel clamp fits the mounting posts of different dental chairs, so it can be fixed easily with minimal handling for dental hands-on practice, allowing a training position to be set up quickly on existing chairs.

Root Canal Apex Locator XTP273

The XTP273 root canal apex locator is used to measure working length and depth in root canal treatment, listed in the endodontic category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Cordless Endodontic Motor XTP259

The XTP259 cordless endodontic motor is intended for dental root canal treatment and uses a cordless handpiece design, listed in the endodontic category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Measuring Cup

Mega+ Sports Mouthguard

Mega+ sports mouthguards are individually designed and fabricated from the patient oral condition, providing an oral protection option for training and competition. The official site notes that different sports, intensity levels and oral conditions correspond to different product requirements, that selection and use should be assessed by a professional, and that the product usage and cleaning instructions should be followed. No material hardness or thickness data is published on the page.

Roughing End Mill, 3-Flute Aluminum / 4-Flute Steel, 55/65 Degree Wave-Edge Coated Cutter

Roughing (wave-edge) end mill available as a three-flute aluminium rougher and a four-flute steel rougher: four-flute 55-degree bronze coated, four-flute 65-degree nano-blue coated, and three-flute 62-degree uncoated for aluminium. Swiss Platit coating plus secondary passivation takes the edge progressively from unpassivated to single and then double passivation, giving smoother, finer cutting, a better surface finish and a longer service life. The wave-edge geometry breaks and clears chips during roughing, making it suitable for roughing and stock removal in aluminium and steel, with coating and hardness grade chosen from the workpiece suitability chart.

Mega+ Removable Prosthetics

Mega+ removable prosthetics are designed and fabricated according to the patient oral condition, the extent of the restoration and usage requirements, with emphasis on continuity between data, design and clinical communication. The official site notes that removable restorations must consider supporting conditions, occlusion, materials and maintenance needs, and that the specific product choice and use are guided by a qualified dentist. Data requirements, design confirmation, fabrication process and maintenance materials are available from the Mega+ team.

US980 Intraoral Sensor

The US980 intraoral sensor uses a CMOS chip with an industrial-grade microfiber panel, high-resolution X-ray conversion and advanced AD guidance to reproduce true tooth images, so even fine apical bifurcations are easy to find. The cable is replaceable, the sensor can be soaked in disinfectant to IPX7, helping avoid cross-infection, and it works with almost every brand of X-ray unit on the market. Chip type CMOS APS, GOS scintillator, 27.5×38.5mm body, 22.5×30mm active area, 18.5μm pixels and 1.9M (1600×1200) image pixels.

Collagen Sponge (Collagen Plug)

Mainly used for filling and hemostasis of extraction sockets, after tooth extraction, after implant removal and after cyst enucleation, helping to prevent dry socket formation, wound infection and secondary bleeding. Made from type I collagen extracted from healthy bovine Achilles tendon by freeze-drying, it is a white porous absorbable collagen sponge for oral use, supplied sterile and for single use only, with good histocompatibility and complete absorbability; its porous structure favors absorption of tissue exudate.

4D PRO Zirconia Block

4D PRO zirconia blocks represent a premium solution focused on superior aesthetics and high production efficiency. Made from 100% SINOCERA zirconia powder with an advanced 8-layer gradient design, they deliver lifelike restorations with fast sintering of a 3-unit bridge in just 2.7 hours. It utilizes proprietary techniques to achieve layers seamless transition, authentically restoring the natural color of teeth. Indications include substructure crown, 3-unit full contour bridge, multi-unit substructures and long span bridge with implant.

4-Flute Carbide Corner Radius End Mill for Steel, 60/65 Degree Coated Bull Nose Cutter

Four-flute tungsten carbide corner-radius (bull nose) end mill for steel, available in a 60-degree bronze-coated version and a 65-degree nano-blue version. It uses a Swiss Platit coating and a secondary passivation process for a smooth edge and fine, even cutting; micro-grain carbide stock ground on an imported ANCA five-axis machine keeps it free of chip sticking, high in hardness, slow in wear, mirror finished and durable for a longer service life. The workpiece suitability chart covers carbon steel, alloy steel, pre-hardened and hardened steel, stainless steel, cast iron, copper alloy, aluminium alloy, titanium alloy and heat-resistant alloy, selected by hardness range.