Produtos

Collagen Sponge (Collagen Matrix Flap)

Mainly used for augmentation of various oral soft tissues, alveolar ridge reconstruction, enlargement of the local gingiva to increase keratinized tissue around teeth and implants, guided tissue regeneration for covering recessed/atrophic root defects, and gingival coverage of extraction sockets. Made from type I collagen extracted from healthy bovine Achilles tendon by freeze-drying, it is a white porous absorbable collagen sponge for oral use, supplied sterile and for single use only, with good histocompatibility and complete absorbability.

iRegene Oral Antibacterial Spray (20 ml/bottle)

For daily oral cleaning, antibacterial care and oral care; specification 20 ml per bottle. The main active ingredient is polyhexamethylene biguanide hydrochloride at 0.01%-0.02% (W/V). To use, aim the nozzle at the affected area and spray 3-5 times, several times a day as appropriate.

Dental Equipment Water Supply Unit WSD-III

The WSD-III water supply unit feeds water to dental equipment; the page lists DC12V 0.5A or DC30V 1.5A host input, an AC100-240V 50/60Hz adapter, 50 ml/min water supply, 0.02 MPa water pressure and 5-40 °C working temperature.The official page lists the following specifications: Input voltage: 主机：DC12VO.5A(WSD-III) DC30V1.5A(WSD-III); Adapter: AC100-240V (1 1 10% ) 50/60HZ; Water supply: 50m1/min; Water pressure: 0.02MPa; Working temperature: 50C-400C; Storage temperature: 00C-500C; Humidity: 80%以上; Atmospheric pressure: 70KPa-106KPa.

SUPER05 Dental Diagnostic X-ray Unit

The SUPER05 dental diagnostic X-ray unit has a tube voltage of 70kV ±10% and tube current of 2mA ±20%, accepts 100-240V input at 50-60Hz, and uses a Canon (Toshiba) X-ray tube with a 12.5° anode angle and 0.4mm focal spot. Exposure times range from 0.04s to 2.0s, leakage radiation is 0.25mGy/h at one metre, and the unit weighs 1.9kg.

LUB 919 +

Mobile Cart 2

Lithium Disilicate C14/B40

StarShine Lithium Disilicate C14/B40 is a premium dental restorative material that combines exceptional strength, durability, and biocompatibility. Ideal for crowns, bridges, and ultra-thin veneers, it withstands daily chewing forces while providing lifelike aesthetics and long-term patient comfort. Exceptional strength for crowns, bridges and ultra-thin veneers, thermal and biocompatible resistance to warping or cracking, and lifelike customizable translucency, shade and luster. Blocks come in C14 18-15-13 mm and B40 40-15-15 mm formats with LT, MT, HT, MO and HO translucency classes.

Gusrom ST White Zirconia Blocks-High-translucency white zirconia

ST White zirconia block is upgraded by Gusrom exclusive zirconia formula; the translucency is up to 43% with no effect on high bending strength. ST White zirconia discs are possessed of 43% translucency, realizing the natural effect of dental restorations. 1200 MPa of bending strength can withstand daily chewing force. As a CAD/CAM dental zirconia, ST White zirconia is possessed of better edge stability when processed by CAD/CAM machine.

Large-Taper Progressive NiTi Rotary Files (Plus)

The large-taper progressive NiTi file system includes SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, tip sizes #18-#30, 250-350 rpm, torque 1.0-3.0 and lengths of 19 mm or 21/25 mm, for large-taper canal preparation.

SHT PLUS Zirconia Block

SHT-PLUS zirconia blocks are high-strength, multi-layered zirconia blocks. With their 3-layer structure and flexural strength of up to 1250 MPa, they can reliably support a variety of restorations, from single crowns to 14-unit bridges. High-strength performance up to 1250 MPa, patented 3-layer design for natural gradient aesthetics, and wide indications from single crowns to large bridges.

Dental Teaching Training Head Model JG-C8

The JG-C8 dental teaching head model combines a stainless steel fixing clamp with a universal joint. The stainless steel clamp fits the mounting posts of different dental chairs, so it can be fixed easily with minimal handling for dental hands-on practice, allowing a training position to be set up quickly on existing chairs.

Bench Water Turbine XTH202-1

The XTH202-1 is a bench water turbine unit listed with 0.2-0.4 MPa water supply pressure for dental equipment water supply.The official page lists the following specifications: Water supply pressure: 0.2-0.4Mpa; 可与牙科用手机连接：: l 1支高速手机; 或1支低速手机: l 吸痰器的管子.

Desktop-Mounted Dental Teaching Head Model JG-C7

The JG-C7 desktop-mounted dental teaching head model is secured to the workbench with two stainless steel clamps and adapts to different desktop conditions. The head model supports 180-degree rotation, stowing and height adjustment, so a dental practice station can be set up quickly on an existing desk. The two stainless steel clamps fix to the edge of the tabletop, making use of existing classroom furniture, while the rotation, stowing and height adjustment reduce the space occupied when training is finished. It suits desktop practice in dental schools, hospital teaching departments and training institutions for basic instrument handling, posture exercises and group teaching.

T20 Ergonomic Dental Unit Chair

The T20 dental unit chair is engineered to deliver ergonomic comfort, precise control and reliable infection control for modern dental clinics, designed for high-efficiency daily treatment. It combines an ergonomic patient chair with smooth low-noise dual-axis movement and integrated headrest, a dual-color (white/yellow) LED sensor operating lamp with adjustable brightness and color temperature, an instrument tray with air brake and flexible positioning for 4/5 instruments, an assistant control panel with integrated water heating and cup filling, a 90-degree rotatable removable ceramic cuspidor with pure water bottles, a multifunctional foot pedal, a dentist stool with backrest and imported medical-grade water and air tubing. Power supply AC 220V/50Hz (110V optional); air pressure 0.55-0.8 MPa; water pressure 0.2-0.4 MPa; chair elevation from approx. 350 mm to approx. 800 mm; max load 180 kg.

Dental Teaching Training Head Model JG-C9

The JG-C9 dental teaching head model is fitted with an adjustable stainless steel slide rail; once the rail is fixed to the workbench, the head model can be adjusted through several heights and rotated 180 degrees laterally. The high-end design is both practical and good looking, and it is used to set head-model posture during dental teaching and training.