Produtos

Weingart Pliers

The Weingart plier is used to guide and move the arch wire in and out of placement and to bend the arch wire ends; the bend in the beak facilitates easy grasping of the arch wire and guiding it into buccal tubes. Tip hardness is HRC 50-55, and it is also used to cinch back the distal end of arch wires to avoid injury of soft tissue. It is made of medical stainless steel, standard size, packed 1 pc/pk. Features include reliable and durable construction, fine grinding and polishing, a special non-clearance hinge, ergonomic design with arc edge, handcrafted precise dimensions and imported advanced nanometer alloy technology.

Aluminum 2-Flute Extra-Long End Mill, High-Gloss Mirror Carbide Double-Flute Cutter

Two-flute high-gloss end mill for aluminium with an extra-long cutting length, made from micro-grain tungsten carbide at HRC62 hardness and cutting smoothly without tool marks. The large chip flutes speed up chip evacuation for higher productivity, the full-edge anti-vibration design improves surface quality, and ANCA grinding gives high accuracy with a sharp, non-sticking edge. It suits aluminium machining and high-speed aluminium cutting with a flat, bright cut. Made from premium tungsten carbide and ground on an imported ANCA five-axis machine, it is sharp, tough, hard wearing and mirror finished for a long service life.

Tungsten Carbide Saw Tips, Micro-Grain Blanks, Grades FM01-FM15/YG Series

Tungsten carbide saw tip blanks made from micro-grain carbide stock, long lasting and wear resistant, ground on an imported ANCA five-axis machine for a sharp, tough edge and high accuracy, and available made to order. Tips are supplied by grade: FM01 (ultrafine, 2.2% binder, 94.8 HRA, density 15.20, 2400 MPa, K01), FM03 (submicron, 3.0%, 94.2 HRA, K01), FM35 (submicron, 4.8%, 93.4 HRA, 15.00, 2500, K05), YF5 (fine, 5.0%, 92.0 HRA, 15.00, 2600, K10), YG6 (medium, 6.0%, 90.8 HRA, 14.90, 2600, K10), YF7 (medium, 7.0%, 14.73, 2700, K20) and YG8 (medium, 8.0%, 90.0 HRA, 14.72, 2900, K20), for brazing onto saw teeth.

Bench Turbine Unit XTH206

The XTH206 is a bench turbine (air supply) unit listed with 0.5 MPa working pressure, 0.8 MPa maximum pressure, 72 L/min flow, 0.22-0.32 MPa for high-speed handpieces, 40-45 dB noise and 51×41×66 cm dimensions.The official page lists the following specifications: Air pressure: 0.5 Mpa; Max pressure: 0.8 Mpa; Flow: 72L/min; High-speed handpiece pressure: 0.22 Mpa; High-speed handpiece pressure: 0.22Mpa 0.32 Mpa; Noise: 40-45dB; Dimensions: 51 x 41 x 66cm; 总重量: 36KG.

T20 Ergonomic Dental Unit Chair

The T20 dental unit chair is engineered to deliver ergonomic comfort, precise control and reliable infection control for modern dental clinics, designed for high-efficiency daily treatment. It combines an ergonomic patient chair with smooth low-noise dual-axis movement and integrated headrest, a dual-color (white/yellow) LED sensor operating lamp with adjustable brightness and color temperature, an instrument tray with air brake and flexible positioning for 4/5 instruments, an assistant control panel with integrated water heating and cup filling, a 90-degree rotatable removable ceramic cuspidor with pure water bottles, a multifunctional foot pedal, a dentist stool with backrest and imported medical-grade water and air tubing. Power supply AC 220V/50Hz (110V optional); air pressure 0.55-0.8 MPa; water pressure 0.2-0.4 MPa; chair elevation from approx. 350 mm to approx. 800 mm; max load 180 kg.

Gusrom ST ML Zirconia Blocks-Designed for Posterior Restorations

ST ML dental zirconia blocks arrives 43% of high-translucency and 1100 MPa of bending strength, designed for aesthetic posterior restorations. This preshaded zirconia with multilayer color helps to fabricate zirconia teeth closer to natural teeth. The bending strength reaches 1100 MPa, able to sustain force of daily wearing. 43% of high translucency is close to the translucency of natural teeth. 6-layer multilayer color with natural gradient unlocks the possibility in making aesthetic posterior restorations.

DGS-280B / DGS-280B+ Thermostatic Electric-heating Portable Steam Sterilizer

The DGS-280B/B+ is made of quality stainless steel with microcomputer control and digital display, adjustable sterilization temperature and time, over-pressure self-relief, low-water protection and anti-dry-burn protection, plus a dual-scale class-2 reading gauge; it is simple and safe to operate and gives a buzzer prompt with automatic shutdown when the cycle ends. The DGS-280B holds 18L and the DGS-280B+ 24L at 2.0KW, AC 110V 60HZ or AC 220V 50HZ, rated working pressure 0.142MPa, sterilization time 0-99min, chamber Φ280×295 and Φ280×390.

Ease 02 Dental Treatment Unit

CAVEX CA38 Precision Alginate Impression Material

CAVEX CA38 is the most advanced precision impression material in the range, a viscous, tough material suited to general dental treatment and orthodontic impressions. Its high elasticity and tear resistance make it ideal for precision impressions with detail down to 25μm; the powder is very fine, giving a smooth bubble-free surface and excellent plaster compatibility. 500g pack, 2-day stability, 25μm accuracy, light blue, non colour-changing, elasticity ++++, mint flavour, 5-year shelf life.

XTG101-M4/B2-T2

XTG101-M4/B2-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

Roughing End Mill, 3-Flute Aluminum / 4-Flute Steel, 55/65 Degree Wave-Edge Coated Cutter

Roughing (wave-edge) end mill available as a three-flute aluminium rougher and a four-flute steel rougher: four-flute 55-degree bronze coated, four-flute 65-degree nano-blue coated, and three-flute 62-degree uncoated for aluminium. Swiss Platit coating plus secondary passivation takes the edge progressively from unpassivated to single and then double passivation, giving smoother, finer cutting, a better surface finish and a longer service life. The wave-edge geometry breaks and clears chips during roughing, making it suitable for roughing and stock removal in aluminium and steel, with coating and hardness grade chosen from the workpiece suitability chart.

Osteotomy Contra-Angle DJW-45-3

The DJW-45-3 osteotomy contra-angle handpiece is intended for implant, orthopedic, ENT, sinus-lift, bone-window and bone-grinding surgery; the page lists a 1:1 ratio, external water cooling, max speed about 40,000 rpm, noise ≤68 dB, E-type air/electric motor connection and Ø2.34-2.35 mm burs of 45mm length.The official page lists the following specifications: Gear ratio: 1:1; Cooling: 外置水管 External water; Max speed: ～40,000rpm; Applicable bur: 直径:Φ2.34mm-Φ2.35mm，长度:45mm; Noise: ≤68dB; Connector: E型接口的气动\电动马达。E-type Air Motor/Electric Motor.

Prophy Angle / Polishing Angle

The prophy angle and polishing angle are the core category of the Haolida product centre, and the company describes itself on its website as a professional supplier of medical dental prophy angles. The manufacturer states that it runs a standard manufacturing plant with sufficient capacity to complete production within the agreed lead time, that a mature quality inspection team checks every step from incoming raw material to finished goods, and that products can be customised to the actual requirements of the customer. No material, speed or connector specifications are published on the product pages.

Aluminum Ball Nose 2-Flute End Mill, Rainbow-Coated Solid Carbide R-Type Ball Cutter

Rainbow-coated two-flute ball nose end mill made of premium tungsten carbide. The ball-nose R corner is used for curved profiling and finishing; the cutter is sharp and tough with a long service life and leaves a smooth surface without tool marks, and each tool is ground on an imported ANCA five-axis grinder with a high-gloss mirror finish. It suits copper alloy, aluminium alloy, magnesium alloy, acrylic, wood and other non-ferrous materials, and is used on high-speed machines such as CNC machining centres, engraving machines and precision engravers. Standard sizes are listed as cutting diameter x R corner x flute length x shank diameter x overall length, for example 3 x R1.5 x 8 x d4 x 75, 1.5 x R0.75 x 3 x d4 x 50, 4 x R2 x 10 x d4 x 75 and 6 x R3 x 12 x d6 x 75.

Aluminum Milling Indexable Insert APKT1604 / APKT1135, Carbide CNC Milling Insert

Indexable carbide milling insert for aluminium, models APKT1604 and APKT1135, rhombic with a central hole, mounted on CNC milling arbors. Made from ultra-fine grain virgin carbide, the insert resists deformation well and offers good wear resistance for a longer life; the edge is sharp with strong cutting force, efficient and stable machining and high surface finish, while the smooth insert face evacuates chips and resists built-up edge. It is widely used in machinery, chemical, medical, sports, defence and petroleum industries for aluminium parts and forming work. Recommended cutting speeds: P steel 100-150 m/min, M stainless 70-120 m/min, K aluminium 90-280 m/min (for reference only; actual machining conditions govern).