B-Cure

Product description

## New generation of wide -spectrum LED Customized wide-spectrum LED imported from US ## B-Cure Curing Light Emits More Uniform Light B-Cure Curing Light emits more uniform light, and the local light intensity will not be too low on the same plane. In bracket bonding, the light energy is more uniform and penetrates through the bracket comprehensively, so the bonding is more reliable. The spatial light intensity of B-Cure is evenly distributed without depressions or multiple peaks at the top. The spatial light intensity of ordinary Curing Light is unevenly distributed. ## Ortho mode In the ortho mode that is unique to B-Cure,the light intensity automatically adjusts to 2000 mw/cm². The user can set the single curing time for 3 s or 5s,and the device will automatically conduct 10 circles of curing with interval of 1 s. One operation can basically finish the cementation of 2 to 3 brackets,which reduces operations and improves efficiency. 10 cycles with an interval of 1s after each cycle;Time setting for each cycle can be 3 s or 5 s. ## Three built-in LEDs In One Light, Which Can Achieve An Optimal Broadband Spectrum Of 385 To 515 nm Three built-in LEDs in one light, which can achieve an optimal broadband spectrum of 385 to 515 nm that is similar to the spectrum of halogen lights; therefore, new light is suitable for polymerizing the entire range of photoinitiators and materials currently used in dentistry. The light-absorbing peak of traditional material (including camphorquinone;the red line on the figure) is 460 nm,so the curing can be done by either general Curing Light or Wide Spectrum Curing Light. But camphorquinone is of a yellow color. It is not suitable to add large amounts of it to bleaching resin or light-colored resins. The light-absorbing peak of new materials (including TPO;the green line in the figure above) is 405 nm. Compared with general LED Curing Light,B-Cure owns additional 385 nm- 420 nm wave band which is able to better curing this kind of new material. TPO is of white color.Thus it is suitable for adding to the bleaching resin and light-colored resin. ## More Human- friendly Design B-Cure adopts ergonomic design with smooth lines and small size. Doctors can easily hold it. ## Optimized Optical Fiber Can be autoclaved under 134°C high temperature and 0.22MPa high pressure, effectively avoiding cross infection. ## Light Hood Studies prove that Blue-ray will cause macular degeneration to retina and eyes. Woodpecker light hood is made of selected quality materials,rejecting Blue-ray injury. ## Soft Mode & Pulse Mode Under Soft mode, the power of LED gradually increases, giving a longer gel period for resin to reduce the edge discomfort caused by stress contraction of resin. Light intensity increases from 0 mw/cm2 to 1200 mw/cm² Continuous cycle of 1s, including the working time of 0.8s and an interval of 0.2 s; Time setting: 5 s, 10 s, 15 s and 20 s. ## Turbo Mode & Normal Mode Constant high intensity of 1800- 2000 mw/cm² Time setting: 3 s and 5 s. Constant intensity of 1000-1200 mw/cm² Time setting: 5 s, 10 s, 15 s and 20 s.