Dental Equipment
Products published by Chinese dental manufacturers. Open a product to see specifications, images and the supplier behind it. · 1752
无盐电解水双生液检测报告 - 双极水SOWATER
产品检测介绍： 无盐电解水双生液，委托中国检验检疫科学研究院综合检测中心、中检科（北京）化妆品技术有限公司、上海微谱检测科技集团股份有限公司等具备 CMA、CNAS 资质第三方机构，完成理化指标、重金属筛查、稳定性、微生物卫生指标、多菌种抑菌抗菌、冷冻解冻耐受性、动物功效试验全套委托检测。 理化检测结果显示： 本品为无色透明液体，多批次原液 pH 区间 5.92-6.10，有效氯含量区间 52.2-52.71mg/L；铅、砷、汞、镉重金属均未检出，可溶氟未检出。耐热、耐寒稳定性试验后溶液澄清无机械杂质，无凝聚物、无浑浊、不冻结，色泽稳定；样品经冷冻结冰再解冻后，pH、有效氯指标仍可维持，理化性状未发生异常。成品细菌菌落总数、真菌菌落总数、大肠菌群、铜绿假单胞菌、金黄色葡萄球菌、溶血性链球菌均未检出，各项指标符合 GB 15979-2002《一次性使用卫生用品卫生标准》、《消毒技术规范》（2002 年版）以及 QB/T 2945-2012《口腔清洁护理液》相关要求。 抗菌抑菌试验表明： 在 20℃±1℃实验室条件下：本品原液对大肠杆菌、金黄色葡萄球菌、白色念珠菌、变异链球菌、牙龈卟啉单胞菌作用 1min，重复三次试验抑菌率均为 100%；原液对幽门螺旋杆菌作用 30s，重复三次试验杀灭率均为 100%；样品冷冻结冰解冻后的试样原液，对大肠杆菌、金黄色葡萄球菌作用 1min，杀灭率同样可达 100%；各试验配套中和剂均可有效中和样品抗菌作用，中和剂及中和产物对受试菌种、培养基无不良影响。 动物功效试验评价： 磷酸组胺诱导豚鼠急性瘙痒模型试验显示，样品组相较阳性对照组，豚鼠瘙痒次数、挠痒持续时间显著减少，具有统计学意义，样品原液具备止痒作用；家兔口腔溃疡动物模型试验显示，受试物可降低血清炎症因子 IL-6 水平，缩短溃疡平均愈合时间，具备减轻口腔炎症、促进溃疡面愈合的作用。 消费者速懂： 有点"黑科技"但卖点很实在的电解水。冻成冰再化开依然有效，夏天放车里、冰箱里都不怕；动物实验显示能止痒、能帮助口腔溃疡愈合，还能杀灭胃病相关的幽门螺旋杆菌。口腔溃疡反复、皮肤瘙痒、想找便携消毒水的人可以试试。
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
双极水功能水检测报告 - 双极水SOWATER
产品检测介绍： 双极水功能水，委托中国检验检疫科学研究院综合检测中心、广东省宝通质量检测有限公司等具备 CMA、CNAS 资质第三方机构，完成理化性状、pH、有效氯、稳定性、重金属筛查、卫生微生物指标、抑菌性能全套委托检测。 理化检测结果显示： 本品为无色透明液体，不分层、无悬浮物或沉淀；原液 pH 平均值 6.41，原液有效氯含量平均值 46.3mg/L；耐热、耐寒稳定性试验后无凝聚物、无混浊、不冻结，色泽稳定。多批次重金属检测：铅、砷、汞、镉均未检出，符合相关标准限值要求。微生物卫生指标检测表明，细菌菌落总数≤10CFU/mL，真菌菌落总数、大肠菌群、铜绿假单胞菌、金黄色葡萄球菌、溶血性链球菌均未检出，检测结果符合 GB 15979-2024《一次性使用卫生用品卫生标准》相关规定。 抑菌试验表明： 依据 QB/T2738-2023《日化产品抗菌抑菌效果的评价方法》开展检测，实验室条件下样品原液作用 30 秒，对金黄色葡萄球菌、大肠杆菌、白色念珠菌、红色毛癣菌抑菌率均≥99.9%；对马拉色菌抑菌率≥90%，判定具备抑菌作用。 消费者速懂： 一瓶"哪里都能喷"的多功能水。30 秒就能抑制常见细菌和真菌，包括脚气相关的红色毛癣菌、头皮屑相关的马拉色菌。喷手、喷鞋袜、喷桌面都能用，家里备一瓶，除菌需求基本都覆盖。
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
双极水牙液检测报告 - 双极水SOWATER
产品检测介绍： 双极水牙液，委托中国检验检疫科学研究院综合检测中心、上海微谱检测科技集团股份有限公司、飞凡标准技术服务（苏州）有限公司等具备 CMA、CNAS 资质第三方机构，完成理化性状、pH、稳定性、重金属筛查、乙醇、色素、发泡力、可溶氟、卫生微生物指标、多菌种抑菌性能、细胞及体外模型功效全套委托检测。 理化检测结果显示： 本品为澄清透明液体，无机械杂质；原液 pH 平均值 6.39；可溶氟含量符合标准限值；耐热、耐寒稳定性试验后无凝聚物、无混浊，色泽稳定；乙醇未检出（＜0.03%）；发泡力泡沫高度为 0mm；柠檬黄、日落黄、胭脂红、新红、赤藓红、苋菜红、亮蓝 7 种合成着色剂均未检出；铅、砷、汞、镉重金属均未检出。微生物卫生指标检测表明，细菌菌落总数、真菌菌落总数为 0CFU/mL，大肠菌群、铜绿假单胞菌、金黄色葡萄球菌、溶血性链球菌均未检出，检测结果符合 GB 15979-2024《一次性使用卫生用品卫生标准》相关规定。 抑菌试验表明： 依据 QB/T2738-2023《日化产品抗菌抑菌效果的评价方法》开展检测，在 20℃±1℃实验室条件下：原液作用 15s，对大肠杆菌、金黄色葡萄球菌、铜绿假单胞菌、白色念珠菌、变异链球菌，三次重复试验抑菌率均为 100%；原液作用 30s，对牙龈卟啉单胞菌、幽门螺旋杆菌三次重复试验抑菌率均＞99.9%，判定具备强效抑菌作用。 体外模型功效试验： 防龋试验，20.0℃条件下样品作用 2.0min、5.0min、10.0min、20.0min，对变异链球菌抑菌率满足判定要求；人源牙龈成纤维细胞体外试验，样品在 3.13%-12.5% 浓度区间，可显著下调炎症因子 TNF-α，具备减少牙龈炎症的体外效果。 消费者速懂： 漱口水里的"成分极简派"。不含酒精（不辣嘴）、不含人工色素、不含重金属，入口温和；15 秒就能抑制 6 种口腔常见菌，体外实验还显示能减轻牙龈炎症。怕酒精刺激、牙龈爱发炎、有口臭的人会喜欢。
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
双极水湿巾检测报告 - 双极水SOWATER
产品检测介绍： 双极水湿巾（双水巾），委托中国检验检疫科学研究院综合检测中心（具备 CMA、CNAS 资质），完成理化筛查、可迁移性荧光增白剂、重金属、微生物卫生指标、全套毒理安全性委托检测。 理化检测结果显示： 本品为白色湿润片状湿巾；未检出可迁移性荧光增白剂，紫外灯 254nm、365nm 条件下无荧光现象；铅、砷、汞重金属均未检出，符合对应标准要求。微生物卫生指标检测结果：细菌菌落总数、真菌菌落总数均＜5CFU/g，大肠菌群、铜绿假单胞菌、金黄色葡萄球菌、溶血性链球菌均未检出，各项指标符合 GB 15979-2024《一次性使用卫生用品卫生标准》、GB/T 27728.1-2024《湿巾及类似用途产品 第 1 部分：通用要求》相关规定。 毒理安全评价： 采用湿巾挤出液开展动物毒理试验；急性眼刺激试验判定为无刺激性；阴道黏膜刺激试验刺激指数 1.44，判定为极轻刺激性；皮肤变态反应试验致敏率 0%，未见皮肤变态反应。 消费者速懂： "成分干净到发光"的湿巾。没有荧光增白剂（就是让纸更白但可能刺激皮肤的东西），也没有重金属；擦手擦脸擦嘴都安全，敏弱肌、宝宝都能用。
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
双极水婴幼儿手口巾检测报告 - 双极水SOWATER
产品检测介绍： 双极水婴幼儿手口巾，委托中国检验检疫科学研究院综合检测中心（具备 CMA、CNAS 资质），完成理化、可迁移性荧光增白剂、重金属筛查、卫生微生物指标全套委托检测。 理化检测结果显示： 本品为白色湿润片状湿巾；样品挤出液 pH 平均值为 6.07，呈弱酸性；在紫外灯 254nm、365nm 条件下无荧光现象，无可迁移性荧光增白剂；铅、砷、汞、镉重金属均未检出。微生物卫生指标检测表明，细菌菌落总数、真菌菌落总数均未检出，大肠菌群、铜绿假单胞菌、金黄色葡萄球菌、溶血性链球菌均未检出，各项指标符合 GB 15979-2002《一次性使用卫生用品卫生标准》、GB/T 27728.1-2024《湿巾及类似用途产品 第 1 部分：通用要求》以及《消毒技术规范》（2002 年版）相关规定。 消费者速懂： 专门为"什么都往嘴里塞"的宝宝设计的湿巾。不含荧光增白剂、不含重金属，酸碱度接近宝宝皮肤；微生物全部未检出，干净到可以直接擦嘴。给宝宝擦手、擦嘴、擦玩具，妈妈放心。
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
双极水携手北京大学口腔医院黏膜科，带你读懂口腔念珠菌病 - 双极水SOWATER
很多人经常出现口腔口干发黏、舌头灼痛、咽喉不适、吞咽不畅、味觉减退、口角反复溃烂，甚至口腔里长出可擦掉的白色薄膜。这些症状往往不是简单的"上火"，大概率是 口腔念珠菌病 ，也就是我们常说的鹅口疮。 念珠菌属于条件性致病真菌，数据显示，25%～50%的健康人口腔中本身就携带白色念珠菌。在人体免疫力正常、口腔环境稳定的情况下，口腔菌群处于平衡状态，念珠菌会被免疫系统有效压制，不会引发任何不适症状。 但当身体免疫力下降、口腔环境失衡时，念珠菌就会大量增殖，突破口腔防护屏障，最终引发真菌感染。这类疾病尤其偏爱免疫力弱、口腔卫生环境差的人群， 老年人、糖尿病患者、长期佩戴假牙人群，以及长期服用抗生素、激素的人群 ，都是口腔念珠菌病的高发人群。 目前临床针对口腔念珠菌病，主要采用局部抗真菌制剂、口服抗真菌药物两类方案，能够快速抑制真菌、缓解不适症状。但传统治疗方式存在明显局限性：部分药物易引发恶心、口腔刺痛、皮肤皮疹等不良反应，口服药物还会加重肝肾代谢负担，多数人难以坚持完整疗程；长期反复用药，容易产生真菌耐药性，导致药效递减；同时念珠菌会在口腔黏膜、假牙表面形成顽固生物膜，普通药物难以穿透清除，这也是病情反复、久治不愈的核心原因。 针对传统治疗的诸多痛点， 双极水携手北京大学口腔医院黏膜科开展随机对照临床试验，相关研究成果已成功发表英文专业文献 ，其用于口腔念珠菌病的有效性与安全性，均得到权威临床验证。 不同于传统药物的化学抑菌机制，双极水采用 物理抗菌原理 ，从根源规避耐药性问题，可高效杀灭白色念珠菌，同时破坏真菌赖以生存的生物膜，大幅降低疾病复发概率。它口感温和无苦涩异味、黏膜刺激性极低，适配性更强，更易坚持完整使用周期。经动物实验与临床试验证实，双极水对口腔黏膜友好、无肝肾代谢负担，老人、假牙佩戴者等特殊人群均可安心使用，既可单独用于日常干预护理，也可搭配传统药物协同增效。 如果你长期被口腔白斑、黏膜灼痛、反复真菌感染等问题困扰，可咨询专业口腔医生，选择更安全、不易复发的双极水干预方案，科学守护口腔健康。
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
含漱液行业标准立项！双极水作为行业代表受邀参会
2025 年 12 月 3 日，中国标准化协会在北京主办 “功能水” 及 “含漱抗菌液” 标准立项论证会，双极水作为行业代表受邀参会，体现行业协会对其技术实力、市场口碑的肯定。 会上协会领导围绕行业标准化推动高质量发展发表讲话，倡导搭建实用且具备前瞻性的行业标准体系。双极水总经理孙飏基于企业技术沉淀给出多项建议，获得与会专家、代表认可。 查看原文报道：https://caijing.chinadaily.com.cn/a/202512/05/WS69326fe3a310942cc4995124.html
Price on requestHuoren Jingchuang (Beijing) Medical Equipment Co., Ltd.
OEM/ODM Soft Bristle Electric Toothbrush Manufacturer
Build a differentiated soft bristle electric toothbrush collection with flexible product configurations for sensitive-care and daily-cleaning positioning. From filament diameter and tuft design to pressure-control features and retail packaging, you can develop a complete product solution for your sales channel. Custom 4 mil, 5 mil, and 6 mil bristle configurations. Sonic, rotating, and pressure-sensor models available. Multiple colors and brush head combinations. Sample development and mass-production support. A soft bristle electric toothbrush is not defined by the bristles alone. The complete user experience depends on the brush head design, filament diameter, tuft density, trim profile, motor output, cleaning mode, and pressure-control system.Besman helps you combine these elements into a product suitable for your target users, retail channel, and price range. Soft and Extra-Soft Bristle Options: Select different filament diameters, materials, tuft arrangements, trim profiles, and softness levels for daily cleaning, sensitive-care, gum-care, and entry-level product lines. Gentle Cleaning Modes: Configure Gentle, Sensitive, Gum Care, Daily Clean, Massage, or other cleaning modes according to your product positioning. Pressure-Control Features: Selected models can be equipped with pressure sensing, visual pressure alerts, or automatic power adjustment to create a more controlled brushing experience. OEM and Private-Label Support: Customize the product color, logo, brush heads, charging method, accessories, gift box, instruction manual, barcode label, and shipping marks. A soft bristle electric toothbrush combines a powered toothbrush handle with a brush head using soft or fine filaments. The complete brushing feel also depends on filament length, tuft density, trim profile, brush head size, motor output, and cleaning mode. Choose a model according to your target price, sales channel, required functions, and preferred product design. A premium electric toothbrush with soft rubber brush head, pressure sensing, wireless charging, and smart display for gentle gum care. A soft-care adult toothbrush with sensitive bristles, gum-care mode, and optional pressure sensing for gentle daily brushing. A smart sonic toothbrush with DuPont nylon bristles, Pedex color-changing bristles, 3D bristle planting, and multiple gentle care modes. A sonic toothbrush with DuPont and Pedex bristles, medium-high bristle density, Sensitive mode, and comfortable maglev cleaning. A wireless sonic toothbrush with DuPont bristles, German color-changing bristles, matte handle, and 15 intensity settings. A slim electric toothbrush with double-tipped bristles, sensitive bristles, four cleaning modes, and lightweight handle for gentle brushing. Besman supports your soft bristle electric toothbrush project from model selection and brush head development to sample approval and mass production. You can customize the bristle softness, filament diameter, tuft arrangement, cleaning modes, product color, logo, accessories, and retail packaging according to your market positioning. We help you develop a gentle-cleaning product line that matches your target users, sales channel, product price range, and brand requirements. Soft, extra-soft, or mixed-bristle configurations 4 mil, 5 mil, and 6 mil filament options Custom tuft patterns and multi-zone brush head designs Sensitive, Gentle, or Gum Care cleaning modes Pressure sensor and adjustable intensity options Logo printing or laser engraving Custom handle and brush head colors Replacement brush head combinations Travel case and protective brush head caps Private-label gift box and user manual Retail carton, barcode label, and shipping marks Sample testing before bulk production Launch your products in the US, Europe, and other key markets with confidence. Our comprehensive certification portfolio smooths customs clearance and ensures you meet the strictest retailer compliance requirements. Tell us which users you are targeting and how you plan to sell the product. Our team will recommend a suitable toothbrush platform, soft-bristle configuration, function combination, packaging solution, estimated MOQ, and sample plan for your project. The final feel of a brush head depends on more than filament diameter. Material, filament length, tuft density, trim shape, end rounding, and motor movement can all affect the brushing experience. We recommend confirming the final softness through physical sample testing before mass production. Suggested Positioning: Extra Soft Fine bristles can be used for products positioned toward gentle cleaning, sensitive gums, first-time electric toothbrush users, and premium gum-care collections. Recommended for outer tufts, gumline-contact areas, or high-density brush head designs. Suggested Positioning: Soft Daily Care A balanced option for brands requiring a soft brushing experience while maintaining a conventional electric toothbrush structure. Suitable for daily cleaning, sensitive-care, pharmacy, and family oral care product lines. Suggested Positioning: Balanced Daily Cleaning Six-mil bristles are commonly used for standard electric toothbrush heads. Their final softness can be adjusted through filament material, tuft density, filament length, and brush head structure. Suitable for mainstream retail, general daily cleaning, and mixed-bristle designs. Suggested Positioning: Gumline and Interdental Care Tapered filaments can be used in selected tuft areas to create a finer contact point and differentiated brush head appearance. They can be combined with end-rounded bristles for multi-zone brush head designs. Suggested Positioning: Replacement Reminder Color-changing filaments provide users with a visible reminder that the brush head may need replacement. Indicator bristles can be arranged in the center, on both sides, or as part of a customized planting pattern. Create a brush head according to your product positioning instead of using one standard bristle configuration for every market. A balanced soft-bristle configuration for general daily brushing. Standard or compact brush head size Designed for product collections focused on a gentler brushing experience. Tapered or double-tip filament options Combines different bristle diameters and trim heights to create separate cleaning zones. Developed for brands that want to combine gentle contact with stain-removal positioning. Spiral or textured filament options The soft-bristle category can support several consumer groups and retail positions. Combine soft filaments with lower-intensity modes and compact brush heads to develop a sensitive-care product line. Use a soft outer-bristle zone, gentle mode, and optional pressure-control function to create a gum-care-focused configuration. A soft brush head and gradual intensity setting can make the transition from a manual toothbrush more comfortable. Slim handles, simple controls, clear mode indicators, and soft brush heads can support senior-friendly oral care collections. Selected brush head shapes and softer bristle configurations can be developed for cleaning around braces and orthodontic appliances. Compact handles, protective brush head caps, USB-C charging, and travel cases can be combined into a portable sensitive-care set. Pressure-control functions, sensitive modes, soft brush heads, and professional packaging are suitable for pharmacy and personal health channels. Common project options include 4 mil, 5 mil, and 6 mil filaments. Other specifications may be evaluated according to the brush head structure, filament material, and order requirements. We can adjust the filament diameter, tuft density, brush head size, outer bristle zone, trim profile, and cleaning mode to develop a gentler product configuration. Final suitability should be evaluated through product testing and professional market requirements. Several models support Gentle, Sensitive, Gum Care, or adjustable-intensity configurations. The available mode names and operating logic depend on the selected model. Pressure-sensing functions are available on selected platforms. Depending on the model, pressure feedback may be displayed through a light, screen, vibration change, or motor response. Yes. Filament colors, indicator bristles, brush head neck colors, planting patterns, and brush head markings can be customized according to project requirements. Yes. We support custom gift boxes, blister cards, brush head boxes, user manuals, labels, barcodes, retail cartons, e-commerce packaging, and master cartons. Please provide your target market, estimated quantity, preferred model, bristle softness, brush head quantity, product color, logo method, required accessories, packaging format, certification requirements, and delivery destination.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd.
OEM/ODM Electric Toothbrush Manufacturing Services
From product design to mass production, Besman provides full-service OEM and ODM manufacturing for electric toothbrush brands worldwide. Custom branding, flexible specifications, and reliable quality control from a source factory in Shenzhen, China. Whether you are launching a new electric toothbrush brand or expanding your existing product line, Besman's OEM/ODM services cover every stage from concept to delivery. We work directly with brand owners, distributors, and e-commerce sellers to develop market-ready electric toothbrush products tailored to your target audience and price positioning. Produce electric toothbrushes based on your existing design specifications. We manufacture to your exact requirements for structure, color, logo, and packaging, ensuring consistent quality across every production run. Produce to your existing design Custom logo, color, and packaging Consistent quality across runs Develop new electric toothbrush products from our existing designs or create fully custom solutions. Our R&D team handles industrial design, structural engineering, mold development, and prototype testing to bring your concept to life. Design from concept to product In-house ID and structural design Prototype testing and refinement Customize every aspect of your electric toothbrush to match your brand identity and market positioning. Custom logo printing, brand colors, and surface finishes including matte, glossy, and metallic options. Match your brand palette with custom body colors, button colors, and trim accents. Choose bristle types, hardness levels, colors, and shapes for different user needs. Custom retail boxes, gift sets, travel cases, and brush head replacement packaging. Adjust motor speed, brushing modes, battery capacity, and charging method. Add travel cases, charging bases, replacement heads, and user manuals with your brand. See how we transform concepts into market-ready products with precision engineering and custom manufacturing. Custom colors, logos, packaging, brush head designs, and product configurations — every detail tailored to your brand identity and market positioning. Our R&D team works with you through every stage. A clear, step-by-step process from initial consultation to final delivery. We confirm your target market, price level, product features, and customization requirements to define the project scope. Our R&D team reviews structure, mold, motor, battery, brush head, and compliance needs. For ODM, we develop concepts and prototypes. We provide detailed pricing, MOQ, sample cost, lead time, payment terms, and customization options. Samples are prepared for function testing, appearance review, branding check, and packaging confirmation before mass production. Controlled assembly, waterproof testing, aging tests, and quality inspection throughout the production process. Retail packaging, export cartons, shipping documents, and delivery coordination to your destination. An integrated manufacturing partner that understands product development, quality systems, and long-term brand cooperation. Over a decade of manufacturing oral care devices with proven quality systems. Direct from our Shenzhen factory — no middleman, better pricing, faster communication. Industrial design, structural engineering, electronics, and software under one roof. CE, RoHS, FDA, FCC, UL — compliance support for your target markets. Flexible minimum order quantities for startups and established brands alike. Multi-stage QC: IQC, IPQC, FQC, PSI — every unit tested before shipping. Standard MOQ starts from 1,000-3,000 units depending on model and customization level. Lower MOQ available for sample testing and new brand development projects. Sample preparation: 7-15 days. Mass production: 25-45 days depending on order quantity, model availability, and customization complexity. T/T 30% deposit, 70% before shipment. EXW, FOB Shenzhen, or DDP terms available. Full export documentation and shipping coordination support. OEM (Original Equipment Manufacturing) means we produce products based on your existing design specifications. ODM (Original Design Manufacturing) means we design and develop the product for you, which you can then brand as your own. Besman supports both models. MOQ varies by model and customization level. For standard models, MOQ typically starts at 1,000-3,000 units. For new product development with custom molds, higher MOQ may apply. Contact us for specific MOQ based on your requirements. For existing model customization (logo, color, packaging), sampling takes 7-15 days. For new product development with custom structure or molds, development typically takes 30-60 days before sample approval. Yes, we provide CE, RoHS, FDA, FCC, and UL certification support. We can also arrange additional testing based on your specific market requirements. Test reports and compliance documents are provided with your order. Yes, we support full packaging customization including retail boxes, gift sets, travel cases, brush head replacement packs, and private label packaging. Our team can help design packaging optimized for your sales channel and target market. Tell us about your brand, target market, and product requirements. Our team will provide a detailed proposal with pricing, MOQ, and timeline within 24 hours.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd.
Frequently Asked Questions
Find answers to the most common questions about our electric toothbrush manufacturing, OEM/ODM services, quality standards, shipping, and after-sales support. Can't find what you're looking for? We're just a message away. Learn about Besman, our factory, and how we work with global partners. Besman is headquartered in Shenzhen, China, with our manufacturing facility in the same region. We warmly welcome factory visits from current and prospective partners. Seeing our production lines, quality control labs, and R&D center in person is the best way to verify our capabilities. Please contact us to schedule a visit, and we will arrange a guided tour. Our core product lines include: Sonic electric toothbrushes — adult and kids models, various speed settings and brush modes Countertop and portable water flossers — multiple tank capacities and nozzle options Replacement brush heads — compatible with major brands and our own models Plaque detection devices — UV-based oral health diagnostic tools Dental care accessories — including oral irrigator tips and dental sprays We also manufacture pet care devices such as automatic feeders and water dispensers. Besman has been manufacturing oral care electrical appliances for over 10 years. Our team brings decades of combined experience in product design, precision engineering, and high-volume manufacturing. We have served clients across North America, Europe, Southeast Asia, and the Middle East. Yes, we provide samples for evaluation. For existing products, samples are typically available within 3-5 business days. For customized samples (with your logo, colors, or modified specs), the process takes 7-15 days depending on complexity. Sample fees may apply but are often credited toward your bulk order. Contact us with your specific requirements. Yes, we maintain a comprehensive digital catalog featuring our full product range, specifications, and customization options. You can request a catalog through our contact page, and we will send it to you within 24 hours. Our international sales team is fluent in English and Mandarin Chinese. We can also arrange communication support in Spanish, German, and Arabic through our partner network. All technical documentation, product specs, and contracts are available in English. Everything you need to know about custom manufacturing, branding, and product development with Besman. OEM (Original Equipment Manufacturing): We manufacture products based on your existing design, specifications, and technical drawings. You provide the design; we handle production. ODM (Original Design Manufacturing): We design and develop the product for you based on your requirements and target market. You can then brand it as your own. This is ideal if you want to launch a product line but do not have an in-house design team. Besman supports both models. Learn more about our OEM/ODM services . MOQ varies by product and customization level: Existing models (no customization): 500-1,000 units Custom logo/branding: 1,000 units Custom colors and packaging: 2,000-3,000 units Full ODM (custom design/mold): 5,000+ units We understand that startups and new brands may need lower initial quantities. Contact us to discuss flexible options. Absolutely. Customization is our core strength. You can customize: Product colors and surface finishes (matte, glossy, metallic) Brush head shapes and bristle configurations LED indicators and display styles Charging base design (USB, wireless, etc.) Custom retail packaging, gift boxes, and inserts User manuals and marketing materials Our R&D team works closely with you through every step. Sample timelines depend on the level of customization: Existing product (no customization): 3-5 days Logo printing on existing product: 7-10 days Custom color/mold modification: 15-25 days Full ODM new product development: 30-60 days We provide photo and video updates throughout the sampling process so you can review progress in real time. Yes. We are a B2B manufacturer — every product we make carries your brand, not ours. We support custom logo printing (silk screen, pad printing, laser engraving), custom packaging with your brand design, and custom user manuals. Your brand identity is fully respected throughout the manufacturing process. Yes, we routinely sign Non-Disclosure Agreements (NDAs) with our clients. We understand that your product designs, branding strategies, and business information are confidential. We can sign your standard NDA template, or we can provide our own. All employee and supplier agreements also include confidentiality clauses. From concept to mass production, our team brings your electric toothbrush vision to life with precision engineering and quality manufacturing. Explore our production capabilities, from mold development to final assembly. Every product is built to your specifications with full quality control. Information about product certifications, quality control, warranty, and compliance. Our products carry the following certifications depending on model and target market: RoHS (Restriction of Hazardous Substances) UL (Underwriters Laboratories, select models) Certification documents are provided with each order. If you need additional certifications for specific markets, we can arrange testing through accredited labs. Electric toothbrushes: 12 months from manufacture date Accessories (brush heads, nozzles): 6 months Extended warranty periods (18-24 months) can be arranged for premium product lines. Warranty terms are specified in your manufacturing agreement. Yes. We manufacture replacement brush heads for all our electric toothbrush models, as well as water flosser nozzles and tips. You can order accessories in bulk alongside your main product order or as separate reorders. Custom brush head designs (different bristle patterns, stiffness levels) are also available with minimum order quantities. Yes. We provide test reports from accredited third-party laboratories (SGS, TUV, Intertek, etc.) for product safety, electromagnetic compatibility (EMC), material compliance (RoHS/REACH), and performance testing. Test reports are included with your order documentation. Additional testing for specific regulatory requirements can be arranged at cost. Our quality control follows a multi-stage process: Incoming material inspection (IQC): All components are inspected upon arrival In-process quality control (IPQC): Regular checks during assembly and production Finished product inspection (FQC): 100% functional testing of every unit before packaging Pre-shipment inspection (PSI): AQL-based statistical sampling before container loading We welcome third-party inspections and provide full QC reports with each shipment. Trade terms, payment methods, shipping options, and after-sales support. We accept the following payment methods: Bank wire transfer (T/T): 30% deposit, 70% before shipment (most common) Letter of Credit (L/C): For larger orders (typically $50,000+) PayPal: For samples and small orders under $5,000 Western Union: For small orders Payment terms are flexible and can be negotiated based on order volume and long-term partnership. We offer multiple shipping options: Sea freight (FCL/LCL): 25-40 days to major ports worldwide. Most cost-effective for bulk orders. Air freight: 5-10 days. Recommended for urgent or high-value shipments. Express courier (DHL/FedEx/UPS): 3-7 days. Ideal for samples and small orders. Rail freight: 18-25 days to Europe. A balance between cost and speed. We handle all export documentation, customs clearance, and logistics coordination. Yes, we are experienced in shipping directly to Amazon FBA fulfillment centers in the US, Europe (UK, DE, FR, IT, ES), and Japan. We handle FBA labeling, packaging requirements, and provide the necessary documentation for Amazon’s receiving process. FBA prep services (labeling, poly bagging, bundling) are available at no additional cost for orders meeting MOQ. Our after-sales policy includes: Defective rate: We target a defect rate below 2%. In practice, it is typically under 1%. Replacements: Defective units are replaced free of charge in your next shipment. Credit: For critical issues, we issue credit notes against future orders. Spare parts: We include 1-2% spare parts (brush heads, charging cables) with each bulk order at no extra cost. Quality issues are rare, but when they occur, we resolve them quickly and transparently. We offer flexible trade terms: FOB Shenzhen: Most common. We handle export up to the port of Shenzhen. EXW: You arrange all shipping from our factory. Suitable if you have your own freight forwarder. CIF / DDP: We handle door-to-door delivery including insurance and import duties. Convenient but higher cost. We recommend FOB for most orders and can recommend reliable freight forwarders if needed. Our team is ready to help with any questions about our products, manufacturing capabilities, or partnership opportunities. Reach out and we'll respond within 24 hours.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd.- No image
Terms & Conditions
Please read these Terms and Conditions carefully before using besmantech.com. They govern your use of our website and outline the terms under which we conduct business as a B2B manufacturer of oral care electrical appliances. Jump to any section of the Terms and Conditions below. 5. Product Information & Pricing Welcome to Besman Technology ("Besman," "we," "us," or "our"). By accessing or using our website at besmantech.com (the "Site"), you agree to be bound by these Terms and Conditions ("Terms"). If you do not agree to these Terms, please do not use the Site. These Terms apply to all visitors, registered users, and business partners who access or use the Site for any purpose, including browsing product information, requesting quotations, placing orders, or contacting our team. We may revise these Terms at any time. The "Last updated" date at the bottom of this page indicates the most recent revision. Your continued use of the Site after any changes constitutes acceptance of the revised Terms. "Site" refers to besmantech.com and all its subpages. "Company," "we," "us," or "Besman" refers to Besman Technology, a manufacturer of oral care electrical appliances headquartered in Shenzhen, China. "User," "you," or "your" refers to any individual or entity accessing the Site. "Products" refers to electric toothbrushes, water flossers, replacement brush heads, dental care accessories, pet care devices, and related products offered by Besman. "OEM/ODM" refers to Original Equipment Manufacturing and Original Design Manufacturing services provided by Besman to business clients. "Quotation" refers to a formal price quote issued by Besman in response to an inquiry. "Order" refers to a confirmed purchase order placed by a client for Products manufactured by Besman. "MOQ" refers to Minimum Order Quantity. You may use the Site for lawful purposes only, including learning about our products, requesting quotations, and communicating with our sales team. You agree not to: Use the Site in any way that violates applicable local, national, or international laws or regulations. Attempt to gain unauthorized access to any part of the Site, its server, database, or backend systems. Introduce or attempt to introduce viruses, malware, or any other malicious code to the Site. Scrape, copy, or republish substantial portions of the Site content without prior written permission. Use automated tools (bots, crawlers, scrapers) to extract data without our express consent. Impersonate another person or entity, or provide false or misleading information. Use the Site to send unsolicited commercial communications (spam). Violations may result in termination of access and, where appropriate, legal action. All content on the Site, including but not limited to product designs, images, logos, text, graphics, layout, software, and documentation, is the property of Besman or its content creators and is protected by intellectual property laws, including copyright, trademark, and patent laws. Reproduce, distribute, or publish any content from the Site without prior written consent. Use the Besman name, logo, or brand elements without authorization. Remove or alter any copyright, trademark, or proprietary notices. For OEM/ODM clients, intellectual property rights related to custom designs, molds, and branding are governed by the separate manufacturing agreement signed between the parties. The Site content does not transfer any IP rights to users. We make every effort to ensure that product information, including specifications, features, and images, is accurate and up to date. However, we do not warrant that all information is error-free, complete, or current at all times. Product specifications may change without notice as part of continuous improvement. Pricing displayed on the Site (if any) is for reference only and does not constitute a binding offer. Actual pricing for OEM/ODM orders is determined through formal quotations based on: Product model and customization level Materials and components selected Packaging and labeling requirements Current raw material and exchange rate conditions Quotations are valid for 30 days from the date of issuance unless otherwise stated. To place an order, please contact us through the Site's contact form, email, or other communication channels provided. A formal quotation will be issued after we review your requirements. Written acceptance of the quotation by the client. Receipt of the required deposit payment (typically 30% of the total order value). Completion and signing of the manufacturing agreement (for OEM/ODM orders). Besman reserves the right to decline or cancel any order at any stage prior to production commencement. If an order is cancelled by Besman before production, any deposit paid will be refunded in full. Once production has commenced, cancellation by the client is subject to the terms specified in the manufacturing agreement, and the deposit may be non-refundable. Unless otherwise agreed in writing, the standard payment terms are: 30% deposit upon order confirmation. 70% balance before shipment (upon receipt of pre-shipment photos and inspection report). Bank wire transfer (T/T) — most common Letter of Credit (L/C) — for orders exceeding USD $50,000 PayPal — for sample orders under USD $5,000 Western Union — for small orders All prices are quoted in USD unless otherwise specified. Bank charges and transfer fees are borne by the client. Payment must be received in full before shipment is released. Shipping methods available include sea freight (FCL/LCL), air freight, express courier (DHL/FedEx/UPS), and rail freight (to Europe). The default trade term is FOB Shenzhen unless otherwise agreed. Estimated delivery times (from shipment date): Sea freight: 25-40 days to major ports Rail freight (Europe): 18-25 days Delivery times are estimates and not guaranteed. Besman is not liable for delays caused by customs, port congestion, weather, carrier issues, or other events beyond our reasonable control. Risk of loss passes to the buyer upon delivery to the carrier (for FOB terms) or upon delivery to the specified destination (for DDP terms), as specified in the quotation. Besman warrants that products will be free from defects in materials and workmanship under normal use for the following periods: Electric toothbrushes and water flossers: 12 months from manufacture date Accessories (brush heads, nozzles): 6 months Damage caused by misuse, abuse, or improper maintenance. Normal wear and tear (e.g., bristle wear on brush heads). Unauthorized modifications or repairs. Damage during shipping by third-party carriers. Products used beyond their intended lifespan. Disclaimer: The Site and all information are provided "as is" without warranties of any kind, either express or implied. Besman does not warrant that the Site will be uninterrupted, error-free, or free of harmful components. To the maximum extent permitted by law, Besman shall not be liable for any indirect, incidental, special, consequential, or punitive damages arising from your use of the Site or any Products, including but not limited to: Loss of profits, revenue, or business opportunities. Cost of substitute products or services. Besman's total liability arising from any product order shall not exceed the total amount paid by the client for the specific order giving rise to the claim. This limitation does not apply to liabilities that cannot be excluded under applicable law, including liability for gross negligence, willful misconduct, or personal injury. We respect your privacy and are committed to protecting your personal data. When you contact us through the Site, we collect information such as your name, email address, company name, and message content for the purpose of responding to your inquiry and processing orders. We do not sell, rent, or share your personal data with third parties for marketing purposes. Your data is used solely for: Responding to inquiries and quotations. Processing and fulfilling orders. Sending product updates and relevant communications (with your consent). Complying with legal obligations. For full details, please review our Privacy Policy . You may request access to, correction of, or deletion of your personal data at any time by contacting us. As a B2B manufacturer, our return and refund policy is governed by the terms specified in each manufacturing agreement. The general policy is as follows: Defective products: Products found defective within the warranty period will be replaced free of charge in the next shipment or credited against future orders. Incorrect products: If Besman ships products that do not match the agreed specifications, we will arrange replacement or correction at our expense. Sample orders: Sample fees are non-refundable but may be credited toward subsequent bulk orders. Custom-made products: OEM/ODM products manufactured to client specifications cannot be returned except for quality defects. All claims for defective or incorrect products must be reported within 15 days of receiving the shipment, accompanied by photos and a description of the issue. These Terms and any dispute arising from your use of the Site or any Products shall be governed by and construed in accordance with the laws of the People's Republic of China, without regard to its conflict of law principles. Any disputes arising from commercial transactions (orders, quotations, manufacturing agreements) shall be resolved through amicable negotiation first. If negotiation fails, the dispute shall be submitted to arbitration in Shenzhen, China, in accordance with the rules of the Shenzhen Court of International Arbitration (SCIA). For disputes regarding website usage, you agree to submit to the jurisdiction of the courts located in Shenzhen, China. Besman reserves the right to modify these Terms at any time. When material changes are made, we will update the "Last updated" date at the bottom of this page and, where appropriate, provide notice on the Site's homepage. Your continued use of the Site after any changes take effect constitutes your acceptance of the revised Terms. If you do not agree to the revised Terms, you should stop using the Site. For questions about these Terms, please contact us . If you have any questions about these Terms and Conditions, or if you'd like to discuss specific terms for your OEM/ODM project, our team is here to help. We'll respond within 24 hours.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd. 
Leading Electric Toothbrush Manufacturer in China
Work directly with an experienced electric toothbrush factory for OEM/ODM projects, private label customization, stable quality control, and reliable mass production support. We support electric toothbrush brands worldwide with stable manufacturing, OEM/ODM customization, and quality-focused production. We help oral care brands develop and produce reliable electric toothbrush products with direct factory support, flexible customization, and stable quality control. From product structure and motor performance to waterproof design, brush heads, packaging, and final inspection, we focus on the details that matter in long-term electric toothbrush production. Whether you need a cost-effective model, a premium sonic toothbrush, a travel design, or a private label product line, we help you match the right solution based on your market, channel, and brand plan. 0 + Automated production lines We support global brands with a complete ecosystem of oral care devices and accessories. High-frequency sonic toothbrush designed for effective plaque removal and deep cleaning. Smart brushing technology with advanced motor system and intelligent sensors. Ergonomic design and gentle vibration suitable for children's oral care products. Compact and easy to carry, ideal for daily use at home, in the office or during business trips. Designed for gentle yet effective cleaning, ideal for users with sensitive teeth and gums. Built for deep cleaning and stain removal, helping support a cleaner and brighter smile. Compact and easy to carry, ideal for daily oral care at home, at work and while traveling. Designed for powerful and continuous water flow, ideal for families and users who prefer a larger water tank. Rechargeable and cable-free for flexible daily use, offering convenient cleaning with greater freedom of movement. Portable and countertop oral irrigators designed for professional dental cleaning. UV plaque detection devices helping users visualize dental plaque on tooth surfaces. Our workshops support key production processes for electric toothbrush projects, including injection molding, dust-free assembly, product testing, and final packaging. This helps us keep better control over product quality, production schedule, and mass production consistency. Electric toothbrush assembly is carried out in a clean and controlled workshop environment. This helps reduce dust contamination during assembly and supports more stable product appearance, internal structure, and final product quality. Our injection workshop supports the production of electric toothbrush handles, brush head parts, water-resistant components, and other plastic structures. With in-house injection capability, we can better control product consistency, color matching, and production lead time. Our fully automatic injection workshop supports stable production of electric toothbrush plastic parts, including handles, covers, internal structures, and brush head components. Automated equipment helps improve molding consistency and reduce manual production errors. The injection molding process is controlled by automatic machines to keep product size, shape, and surface quality more consistent during mass production. This is important for electric toothbrush projects that require stable fitting, waterproof structure, and reliable assembly. With automatic injection equipment, we can better support large-volume electric toothbrush orders while keeping production efficiency and part consistency. This helps your project move more smoothly from sample confirmation to bulk production. We confirm your target market, price level, product features, and customization requirements. Our team reviews structure, mold, motor, battery, brush head, packaging, and compliance needs. We provide pricing, MOQ, sample cost, lead time, payment terms, and customization options. Samples are prepared for function testing, appearance review, branding check, and packaging confirmation. Mass production follows controlled assembly, waterproof testing, aging test, and final inspection. We support retail packaging, export cartons, shipping documents, and delivery coordination. For oral care brands, compliance support is an important part of product sourcing. We can provide suitable certification and testing document support based on your target market and selected product model. From first samples to repeat orders, our partners value stable product performance, clear customization support, and reliable delivery for their electric toothbrush projects. “We tested several electric toothbrush suppliers before choosing Besman. What impressed us most was the stable vibration performance and clean product finish. The samples matched the final bulk order closely, which made our internal approval process much easier.” “For our brand, product appearance and user experience are very important. Besman helped us adjust the color, logo position, brush head option, and packaging details. The communication was clear, and the final product looked ready for retail shelves.” “We needed an electric toothbrush that was easy to sell online, with clear features and reliable packaging. The product photos, specifications, and sample quality helped us prepare the listing faster. Customer feedback after launch has been positive so far.” “As a growing oral care brand, we care about quality more than just the lowest price. Besman gave us practical suggestions on product positioning, packaging, and model selection. Their team understood what a brand needs, not only what a factory can produce.” “Our main concern was whether the product could meet retail standards and arrive in good condition. The packaging was solid, the accessories were well organized, and the product quality was consistent. It helped reduce a lot of pressure before our first store launch.” “We appreciated the fast response during the sampling stage. Whenever we had questions about battery life, brushing modes, waterproof structure, or packaging, the Besman team gave clear answers. This made the project feel much more controlled from sample to shipment.” We are a factory manufacturer with our own production facility. Besman provides integrated manufacturing support for electric toothbrushes and water flossers, covering product design, mold development, injection molding, assembly, testing, packaging, and quality control. This allows us to better control quality, cost, delivery time, and OEM/ODM customization. Our standard MOQ is usually 3,000 pcs for electric toothbrushes and 1,000 pcs for water flossers . For first-time cooperation, we can support a smaller trial order to help you test the market: 1,000 pcs for electric toothbrushes and 500 pcs for water flossers . The final MOQ may vary depending on the model, logo customization, packaging requirements, and accessory combination. For samples, the delivery time is usually 7–15 working days , depending on model availability and customization requirements. For bulk orders, the standard production lead time is around 35–45 days after order confirmation and deposit payment. The exact delivery time may vary based on order quantity, packaging details, and production schedule. We follow a strict quality control system throughout the whole production process. Besman has passed ISO9001:2015 quality management certification, and our quality checks cover IQC, IPQC, and OQC . Before production, we inspect key materials and components such as motors, batteries, PCBA, brush heads, nozzles, and plastic parts. During production, we check assembly quality, function performance, charging, waterproof structure, and appearance details. Before shipment, finished products go through final inspection for function, accessories, packaging, labeling, and carton condition. For outsourced components, we apply the same quality standards to our suppliers to help ensure stable product quality and reduce after-sales risk for our partners. Our usual payment term is deposit payment before production and balance payment before shipment . For bulk orders, we normally prefer T/T bank transfer to our company bank account . For sample orders or small trial orders, PayPal, Alipay, WeChat Pay, or other agreed payment methods can also be discussed. The final payment terms will be confirmed clearly in the proforma invoice before order arrangement. We can support different shipping methods based on your order quantity, delivery schedule, and destination market. For bulk orders, we usually arrange shipment by sea freight or air freight . For samples or small trial orders, we can ship by express courier , such as DHL, FedEx, UPS, or other available channels. We can also work with your appointed forwarder if you already have one.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd.- No image
Contact BESMAN | Electric Toothbrush Factory in Shenzhen
We are a leading OEM/ODM electric toothbrush manufacturer dedicated to helping brand owners, e-commerce platforms, and distributors build successful electric toothbrush lines. By combining rigorous engineering with comprehensive safety and quality standards, we transform your product concepts into trusted, consumer-ready solutions. Share your electric toothbrush or water flosser requirements with us. Our sales team will contact you shortly. Share your OEM/ODM oral care requirements with us. We'll contact you in short time. Shenzhen Office: R101, R201, R301, R401, R501, NO. 184 Tengfeng Avenue, Fenghuang Community, Fuyong Street, Bao'an District, Shenzhen, Guangdong, China, 518103 Zhongshan Factory: 1st, 2nd, 4th & 5th Floors, Jin’an Road, Jintiao Administrative Village, Minzhong Sub-District, Zhongshan City, Guangdong Province, China Please get in touch with any questions. Even if you don’t see what you want on our website, we may be able to help.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd. 
Where Are Oral-B Electric Toothbrushes Manufactured?
Confused about where your Oral-B toothbrush is made? The answer isn’t simple, as production is global. You want clarity on their "Made In" label, and I can explain it. Oral-B electric toothbrushes are primarily manufactured in Germany and China. The Marktheidenfeld factory in Germany produces their premium rotary models, like the iO and Genius series. Meanwhile, a facility in Shanghai, China, handles sonic toothbrushes and products specifically for the Asia-Pacific market. As someone who works in oral care manufacturing, I often discuss supply chains with brand managers. They look at a giant like Oral-B and want to understand how they operate. It’s a very smart question. Knowing where a product is made tells you a lot about the brand’s strategy, its costs, and its quality focus. It’s not just about a single location; it’s about a complex global puzzle. Let’s look at the pieces of this puzzle together. This knowledge is crucial when you’re planning your own product line. You see various Oral-B models on the shelf and wonder if they all come from the same factory. This can make it hard to understand the full production story. Oral-B toothbrushes are not made in a single country. Manufacturing is global: Germany is the hub for premium rotary models, while China makes sonic models and products for Asia. The USA, Mexico, and India also play key roles in producing brush heads and manual toothbrushes. When I talk with brand managers like Emma, they are often trying to build a resilient and efficient supply chain. They can learn a lot from Oral-B’s strategy. Spreading production across different countries is a deliberate choice. It’s not just about chasing lower costs. It’s about placing manufacturing where it makes the most sense for technology, logistics, and market access. Germany provides engineering prestige, while China offers incredible scale and proximity to the Asian market. This multi-hub approach is a hallmark of a mature global brand. It allows them to balance quality, cost, and speed. Oral-B’s approach shows how a company can use geography to its advantage. Each location has a specific purpose. This table shows a clear strategy. High-tech, high-margin products are centered in Germany, leveraging the "German engineering" reputation. China is used for high-volume production and to serve the huge local market directly. This is something we at Besman help smaller brands understand: you don’t need a dozen factories, but you do need a smart plan for where you produce your goods to match your brand’s goals. You know the brand is Oral-B, but who is the company actually making the product? Is it an anonymous factory, or is the brand owner directly involved in the process? Oral-B toothbrushes are manufactured by Procter & Gamble (P&G). P&G acquired the brand and later bought the German appliance company Braun. It merged Braun’s engineering expertise with the Oral-B brand to create the electric toothbrush line we know today. This story is fascinating from a business perspective. Oral-B was a brand, but P&G gave it manufacturing power. The key move was buying Braun. Braun had a legendary reputation for German engineering and design. By putting the Braun technology inside Oral-B products, P&G created a powerhouse. They weren’t just outsourcing to a random factory. They took control of the entire process by operating their own P&G-owned facilities, like the famous one in Germany. This is what we call vertical integration. When brand managers I work with are looking for a manufacturing partner, they are looking for this same sense of control and integration. They don’t want to just send a design to a factory and hope for the best. They want a partner who, like P&G does for itself, can manage the entire process from R&D to mass production. This ensures quality and consistency, which is vital for building a premium brand. P&G’s ownership of the factories means they have complete authority over the quality and innovation of their products, a goal that many brands aspire to achieve with partners like us. You’ve heard "Germany" and "China," but these are big countries. You are likely curious about the specific factories that are the heart of Oral-B’s production. Oral-B’s main electric toothbrush factories are in Marktheidenfeld, Germany, and Minhang, Shanghai, China. Marktheidenfeld is P&G’s global dental innovation center. The Minhang plant focuses on sonic models and serves the massive Asia-Pacific market. Let’s dive deeper into what makes these two locations so important. They are not just random spots on a map; they are strategic assets for P&G’s oral care business. Each one plays a distinct and critical role in the brand’s global dominance. Understanding their functions gives you a clear picture of how a top-tier brand organizes its production for both premium quality and market reach. The factory in Marktheidenfeld, Germany , is the crown jewel. It’s more than a factory; it’s P&G’s global center for dental innovation. This is where the core engineering for their famous rotary and iO technologies is developed and perfected. Having R&D and production in the same place allows for rapid innovation and strict quality control. It’s the physical embodiment of the "German Engineering" promise. The factory in Minhang, Shanghai, China , plays a different but equally important role. Its location is strategic. It allows Oral-B to efficiently produce and distribute products for the enormous and fast-growing Asia-Pacific market. It specializes in sonic toothbrushes, which are very popular in that region. This isn’t about "cheap labor"; it’s about being close to your customers and tapping into China’s world-class manufacturing ecosystem. I’ve visited many facilities in China, and the integration of technology and scale is truly impressive. You see "Made in China" on a product and might have questions about its quality or why it’s made there. It’s easy to assume it is all about cutting costs. Yes, some Oral-B electric toothbrushes are made in China. P&G has its own factory in Minhang, Shanghai. This plant produces sonic models and other products for the Asia-Pacific market. This is a strategic choice, not just a cost-saving one. The "Made in China" label has changed a lot over the years. For a brand manager like Emma, it’s important to understand this evolution. In the past, it might have meant simple, low-cost goods. Today, for technology products like electric toothbrushes, it means access to a highly skilled workforce, incredible production scale, and one of the most advanced supply chains in the world. I work in Shenzhen, the heart of China’s tech innovation [1], and I see this every day. Oral-B’s Shanghai factory is a perfect example of this modern strategy. They don’t make their premium iO series there; they focus on sonic toothbrushes and products tailored for the local market. This approach is smart for two reasons. First, it puts production right next to a massive consumer base, reducing shipping costs and lead times. Second, it allows them to tap into the local expertise in manufacturing sonic technology. Companies like mine, Besman, are part of this new reality. We are a national high-tech enterprise that partners with global brands to develop and manufacture sophisticated oral care products [1], proving that "Made in China" now stands for innovation and quality. With so much manufacturing moving around the globe, you might wonder if Oral-B’s German roots are still strong. Is "German Engineering" just a marketing slogan from the past? Absolutely. Oral-B’s premium electric toothbrushes are still proudly made in Germany. The Marktheidenfeld factory is P&G’s global innovation hub and handles the engineering and final assembly for high-end lines like the iO and Genius series. Keeping this manufacturing base in Germany is a very deliberate and expensive decision for P&G. They do it for a simple reason: it protects the brand’s premium image. The "Made in Germany" label is a powerful signal to consumers. It implies superior quality, precision engineering, and durability. For a product like the Oral-B iO, which can cost hundreds of dollars, this seal of quality helps justify the price. It’s a core part of the product’s value proposition. This is where the legacy of Braun really shines. P&G continues to invest in the Marktheidenfeld facility because it’s the heart of their innovation. I talk to brand managers all the time who want to create a similar story for their products. They know that a product’s country of origin can be a powerful marketing tool. Whether it’s German engineering, Italian design, or Swiss precision, the manufacturing location can elevate a brand. Oral-B understands this better than anyone, and they use their German factory to anchor the top end of their entire product portfolio, creating a halo of quality that benefits the whole brand. Oral-B uses a smart global strategy, making products in Germany for premium engineering and in China for regional scale. This approach ensures top quality for high-end lines while efficiently serving markets worldwide.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd.
Electric Toothbrush Buying Guide
Choosing the right electric toothbrush for your brand is overwhelming. The wrong choice can lead to a failed product launch. I’ll help you simplify the key features. To choose the right electric toothbrush, focus on the core technology (sonic or rotating) and essential features dentists recommend. These include a two-minute timer, a pressure sensor, and soft bristles. This ensures you select a competitive and effective product for your brand. As a product manager, you need to know what makes one toothbrush better than another. It’s not just about adding features. It’s about choosing the right features that deliver real value to your customers and strengthen your brand. I’ve helped many brands like yours navigate these choices. Let’s break down the most important factors so you can make a decision with confidence. Confused by different toothbrush technologies? This confusion can stall your product development. I’ll explain the key differences to help you choose the best fit for your brand. Oscillating-rotating brushes offer an intense, "dentist-clean" feel, while sonic brushes are gentler, using high-frequency vibrations to clean deep between teeth. The choice depends on the user experience your brand wants to deliver and the target audience you are serving. The motor and the way the brush head moves are the heart of any electric toothbrush. This core technology defines the cleaning experience. I’ve found that understanding these two main types is the first and most important step in developing a new product line. Your choice here will influence everything from product design to marketing claims. The market is dominated by two primary types of cleaning action. Each has its own strengths and appeals to different customer preferences. It is important to know that some studies show rotating brushes can cause more wear on teeth compared to sonic vibration brushes. At Besman, we have focused on perfecting sonic technology. We develop our own advanced magnetic levitation motors that provide powerful, consistent performance and a longer lifespan. I believe this technology offers a superior and safer cleaning experience, which is what premium brands and their customers are looking for. It cleans the tooth surface and also tackles hard-to-reach areas, which is a key advantage. Are you overwhelmed by a long list of features? Adding unnecessary tech increases costs and can confuse your customers. I’ll help you focus on what truly adds value. Focus on the essentials that dentists recommend: a two-minute timer, a 30-second pacer (quadrant timer), and a pressure sensor. These features guide users to brush correctly, adding real, tangible value and ensuring a safe, effective clean every time. When developing a new toothbrush, it’s easy to get caught up in a features race. However, my experience with successful brands shows that the best products are often the ones that perfect the basics. Instead of adding every possible bell and whistle, we should focus on the features that help users build better brushing habits. Dentists recommend brushing for two minutes, spending 30 seconds on each quadrant of the mouth. But most people don’t time themselves. This is where smart features can really help. Two-Minute Timer: The toothbrush automatically stops after two minutes of use. This simple feature ensures users brush for the recommended duration. 30-Second Pacer: The toothbrush briefly pauses or vibrates every 30 seconds. This tells the user it’s time to move to the next quadrant of their mouth, ensuring an even clean across all teeth. These two features are now standard on most quality electric toothbrushes. They are simple, effective, and something customers have come to expect. One of the biggest mistakes people make is brushing too hard, which can damage gums and enamel. Pressure Sensor: This feature alerts the user when they are applying too much force. The toothbrush might flash a light, slow down its vibrations, or make a sound. It’s a critical safety feature for a powerful cleaning device. Soft Bristles: The bristles are just as important as the motor. Always choose soft or extra-soft bristles. Our electric toothbrushes are already powerful, so firm bristles are unnecessary and can be harmful. We often use high-quality, end-rounded DuPont filaments or soft, double-tipped filaments for sensitive gums. Thinking beyond the basics is hard. Ignoring factors like battery life and cleaning modes can lead to poor reviews. Let’s cover the details that create long-term satisfaction. Consider battery life, the number and type of cleaning modes, and the charging method. These factors impact daily convenience and user satisfaction, playing a key role in how a customer perceives your brand’s quality and thoughtfulness long after the initial purchase. Once you have the core technology and essential safety features decided, you can think about the other elements that define the user experience. These are the details that can set your premium brand apart. From my experience, customers appreciate products that are not just powerful, but also convenient and easy to live with. Many toothbrushes offer multiple cleaning modes. While some high-end models have five or more, the most useful ones are typically: Clean: The standard mode for daily use. Sensitive: A gentler mode with lower vibration for sensitive teeth or gums. White/Polish: A mode with variable frequencies designed to remove surface stains. Gum Care/Massage: A mode with low-frequency vibrations to gently stimulate the gums. While having many modes like "Fresh" or "Polish" can seem appealing, I advise my clients to focus on 3-4 modes that offer distinct, easily explainable benefits. Battery life and charging are huge factors for convenience. Battery Life: A long battery life is a major selling point. Many of our models can last 25 days or even more than 35 days on a single charge, which is perfect for travelers. We can customize the battery capacity to meet your target runtime. Charging Method: There are several options. A standard DC charging port is cost-effective. USB Type-C is becoming very popular for its convenience. And for a truly premium feel, wireless charging offers the sleekest and most seamless experience. We can build any of these options into your product to match your brand’s positioning and price point. These practical features are often what turn a good product into a great one. Choosing the right toothbrush means balancing technology with essential features and practical considerations. This ensures the final product perfectly aligns with your brand’s promise of quality and innovation.
Price on requestShenzhen Bosman Electronic Technology Co., Ltd.