Dental Instruments
Products published by Chinese dental manufacturers. Open a product to see specifications, images and the supplier behind it. · 520
Bench Water Turbine XTH202
The XTH202 is a bench water turbine unit listed with 0.2-0.4 MPa water supply pressure for dental equipment water supply.The official page lists the following specifications: Water supply pressure: 0.2-0.4Mpa; 可与牙科用手机连接：: l 1支高速手机; 或1支低速手机: <!--.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Tungsten Carbide Glass Drill Bit Blank, Customizable
Glass drill bit produced to order by Heyuan Fuma Cemented Carbide Co., Ltd. The item is a carbide glass drill blank or finished tool in tungsten carbide for drilling glass and other brittle materials, with the exact size and point geometry confirmed per order. The company controls production from raw material to finished product in house and can guarantee quality along that chain, supplying both standard catalogue items and customized tools plus cutting services.
Price on requestHEYUANFUMACEMENTEDCARBRIDE
Rahor CR99 Air-blowing Mouth Mirror
The Rahor air-blowing mouth mirror blows a continuous stream of air through a blowing hole so that the mirror surface stays clear during treatment, which addresses the fogging that dentists report when working in the mouth. It uses a proprietary wide-area fluid control technology in which a very small air flow covers 100% of the mirror surface, so the air does not disturb the working field. A double-joint design allows the head to rotate through 360 degrees so the mirror can be set to almost any angle needed.
Price on requestBeijing Ruihao Medical Technology Co., Ltd.
FX External-Water Air Motor (4-Hole / 2-Hole)
The FX external-water air motor is a low-speed dental air motor in the FX external-water series, available with 4-hole and 2-hole connections.The official page lists the following specifications: Spray: 外喷水; Chuck type: 旋转式; Speed: 25,000Rpm/mins; Speed ratio: 1:1 直接驱动; Noise: ≤68dB; Air pressure: 0.25(Mpa)-0.3(Mpa); 适用毛刺: Φ2.34-Φ2.35mm; Connection: 2孔/4孔. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
XTG66-M4/B2-T1
XTG66-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Root Canal Apex Locator XTP273
The XTP273 root canal apex locator is used to measure working length and depth in root canal treatment, listed in the endodontic category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
XTG61-M4/B2-T1
XTG61-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
MAX-3 Large-Head Push-Button Handpiece
The MAX-3 large-head push-button handpiece features a large head with 4-hole/2-hole connections and NSK compatibility in the standard high-speed series. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
N-Series Push-Button Contra-Angle Head XTD513-D
The XTD513-D is the push-button head component of the N-series contra-angle (including an external-water version), offered in 4:1, 16:1, 20:1 and 64:1 ratios in the reduction contra-angle head category. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Progressive Multi-Taper NiTi Rotary File System (Plus)
The progressive multi-taper NiTi file system comprises SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, #18-#30 diameters, 250-350 rpm speeds, 1.0-3.0 N.cm torque and lengths of 19 mm or 21/25 mm. Please refer to the official product page and the manufacturer for the complete specification list.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
XTG134-M4-T2
XTG134-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
XTG63-M4/B2-T1
XTG63-M4/B2-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Large-Taper Progressive NiTi Rotary Files (Plus)
The large-taper progressive NiTi file system includes SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, tip sizes #18-#30, 250-350 rpm, torque 1.0-3.0 and lengths of 19 mm or 21/25 mm, for large-taper canal preparation.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Single-Flute Aluminum End Mill, High-Gloss Precision Carbide Flat Cutter
Single-flute high-gloss end mill for aluminium made of premium tungsten carbide at HRC62 hardness, with a single-flute design that leaves a large chip space. The full-edge anti-vibration geometry produces a smoother surface, the large chip groove speeds chip evacuation and raises productivity, and precision grinding on an imported ANCA grinder gives high accuracy with a sharp edge that does not stick and leaves no tool marks. It suits aluminium machining and high-speed aluminium cutting with a flat, bright finish, and works on copper alloy, aluminium alloy, magnesium alloy, acrylic, wood and other non-ferrous materials on high-speed equipment such as CNC machining centres.
Price on requestHEYUANFUMACEMENTEDCARBRIDE
BB Card-Type Contra-Angle DW-BB
The DW-BB is a card-type low-speed dental contra-angle in the external-water low-speed handpiece category, described on the page as a card-type contra-angle.The official page lists the following specifications: Spray: 外部喷水; Chuck type: 卡扣式; Speed: 20,000Rpm/mins; Speed ratio: 1:1直接驱动; Noise: ≤68dB; Air pressure: 0.3（Mpa）-0.35（Mpa）。; Applicable bur: Φ2.34-Φ2.35mm; Connection: 2孔/4孔. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.
Price on requestFoshan Xunteng Medical Technology Co., Ltd