Restorative Dentistry
Model Resin for 3D Printing
Shanghai New Century Dental Materials Co., Ltd. · China
- Price
- Price on request
- Supplier location
- 5th Floor, Renfeng Jinyuan Building, No. 1218 Yongsheng Road, Jiading District, Shanghai, China
Product description
This model resin for 3D printing needs no stirring before use, which saves a substantial amount of printing time. The material is stable and does not deform easily after post-curing. Shrinkage is low, so printed models are accurate: the shrinkage of the cured model is 6.3 percent. The printed surface has a good texture and high hardness, with a Shore hardness of 78D to 82D after curing. Printing is fast and efficient, taking about 35 minutes for a model 2 cm high. The material has little odour and is safe, rated grade 2 in an odour assessment carried out according to HG/T 4065-2008. Flexural modulus 1203.3 MPa, flexural stress 71.2 N, flexural strength 48.6 MPa.
Specifications
| 固化后收缩率 | 6.3% |
|---|---|
| 固化后表面邵氏硬度 | 78D-82D |
| 打印2cm高度模型耗时 | 约35min |
| 气味评定 | 按HG/T 4065-2008评定2级 |
| 弯曲模量 | 1203.3 Mpa |
| 弯曲应力 | 71.2 N |
| 弯曲强度 | 48.6 Mpa |
Product images
