Products
Products published by Chinese dental manufacturers. Open a product to see specifications, images and the supplier behind it. · 2679
XTG140-M4-T2
XTG140-M4-T2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; Speed ratio: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Torquing Pliers
Used for bending square wire or forming torque; usually used in pairs, and the arch wire bent should generally not exceed 0.56 x 0.71 mm. Orthodontic pliers are used for holding, bending, cutting and removing during orthodontic treatment. The instrument consists of jaws, a joint and handles, with jaws shaped for different purposes; it is usually made of stainless steel and reusable. Product size 123 x 54 mm, package size 175 x 80 x 20 mm, 24-month warranty service.
Price on requestHangzhou ALS DentalAppliance Co., Ltd
Rahor CR99 Air-blowing Mouth Mirror
The Rahor air-blowing mouth mirror blows a continuous stream of air through a blowing hole so that the mirror surface stays clear during treatment, which addresses the fogging that dentists report when working in the mouth. It uses a proprietary wide-area fluid control technology in which a very small air flow covers 100% of the mirror surface, so the air does not disturb the working field. A double-joint design allows the head to rotate through 360 degrees so the mirror can be set to almost any angle needed.
Price on requestBeijing Ruihao Medical Technology Co., Ltd.
Edgewise (Square-wire) Bracket
Brackets are used in dentistry to correct irregular tooth alignment. They are divided by clinical treatment method into self-ligating, edgewise, mesh-base edgewise, straight-wire and mesh-base straight-wire brackets, and by slot size into 0.018" and 0.022". A bracket consists of base, slot, tie wings and base plate, made of austenitic stainless steel 0Cr18Ni9 with Rockwell hardness 19-25 HRC; the surface must be smooth and flat without cracks, burrs or depressions, and does not discolor under the action of saliva. Shelf life and warranty are both 36 months.
Price on requestHangzhou ALS DentalAppliance Co., Ltd
Aluminum 2-Flute Extra-Long End Mill, High-Gloss Mirror Carbide Double-Flute Cutter
Two-flute high-gloss end mill for aluminium with an extra-long cutting length, made from micro-grain tungsten carbide at HRC62 hardness and cutting smoothly without tool marks. The large chip flutes speed up chip evacuation for higher productivity, the full-edge anti-vibration design improves surface quality, and ANCA grinding gives high accuracy with a sharp, non-sticking edge. It suits aluminium machining and high-speed aluminium cutting with a flat, bright cut. Made from premium tungsten carbide and ground on an imported ANCA five-axis machine, it is sharp, tough, hard wearing and mirror finished for a long service life.
Price on requestHEYUANFUMACEMENTEDCARBRIDE
Sensor (Blue)
The blue sensor offers a spatial resolution of 25 line pairs per millimetre and 16-bit, 65,535-level greyscale. It is rated IP68 for immersion disinfection, uses an APS CMOS detector with a CsI scintillator, 20μm pixels and a standard 3-metre cable, and runs on Windows 7 or later in 32/64-bit versions.
Price on requestNINGBOYOUJOY DENTALEQUIPENT
Gusrom ST White Zirconia Blocks-High-translucency white zirconia
ST White zirconia block is upgraded by Gusrom exclusive zirconia formula; the translucency is up to 43% with no effect on high bending strength. ST White zirconia discs are possessed of 43% translucency, realizing the natural effect of dental restorations. 1200 MPa of bending strength can withstand daily chewing force. As a CAD/CAM dental zirconia, ST White zirconia is possessed of better edge stability when processed by CAD/CAM machine.
Price on requestShenzhen Gusrom Biotechnology Co., Ltd.
Mega+ German Lemeile Zirconia
Mega+ LeMeiLe zirconia addresses the material and manufacturing needs of fixed restorations, with product information covering material characteristics, application scenarios, design and processing coordination. The official site notes that material selection must consider restoration site, space, design, processing parameters and clinical requirements, and that the exact indications and handling instructions follow the formal product documentation and professional judgement. Material parameters and processing advice are available from the Mega+ team on request.
Price on requestRoyal Dental Lab
US980 Intraoral Sensor
The US980 intraoral sensor uses a CMOS chip with an industrial-grade microfiber panel, high-resolution X-ray conversion and advanced AD guidance to reproduce true tooth images, so even fine apical bifurcations are easy to find. The cable is replaceable, the sensor can be soaked in disinfectant to IPX7, helping avoid cross-infection, and it works with almost every brand of X-ray unit on the market. Chip type CMOS APS, GOS scintillator, 27.5×38.5mm body, 22.5×30mm active area, 18.5μm pixels and 1.9M (1600×1200) image pixels.
Price on requestNINGBOYOUJOY DENTALEQUIPENT
4D SPEED Zirconia Block
The 4D SPEED zirconia ceramic block features an innovative patented formula that allows for fast sintering of a 3-unit bridge in just 45 minutes, creating a realistic restoration. 8 Layers Natural Gradient, 100% SINOCERA Zirconia Powder. It utilizes proprietary techniques to achieve layers seamless transition, authentically restoring the natural color of teeth. Indications for use cover substructure crown, 3-unit full contour bridge, 3-unit substructures, multi-unit full contour, substructures multi-unit, implant single unit and long span bridge with implant.
Price on requestStarShine Medical Technology (Shenzhen) Co., Ltd.
BND-X7 2-in-1 Smart Intraoral Camera & X-Ray Film Digitizer System
The BND-X7 is a 2-in-1 smart imaging system that combines HD intraoral capture with instant X-ray film digitizing, streamlining chair-side diagnosis and electronic archiving in one compact chair-mounted device. Sensor resolution 1/4-inch CMOS, 1280 x 720 HD; light source high-luminance white LED with adjustable brightness; a built-in film reading chamber digitizes X-ray film instantly; interface USB 2.0 / video output; power input DC 12V. Standard configuration includes the main intraoral handle, X-ray film reading chamber, data and power cable, power adapter, and wall or dental chair mounting bracket.
Price on requestFoshan Yiyuan Medical Technology Co., Ltd
Mega+ Ultra-thin Porcelain Veneer
Mega+ ultra-thin porcelain veneers start from aesthetic restorative needs and combine material, shape, shade and the digital design workflow, helping dentists and technicians communicate restorative goals more clearly. The product information focuses on clinical indications, material data, design communication and standardized procedures, while the specific treatment conditions, plan and expected results must be assessed by a qualified dentist based on the individual case.
Price on requestRoyal Dental Lab
XTG183-Y2
XTG183-Y2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: 丘克型: Push button按压取针; Speed ratio: 300.000-320,000rpm; Air pressure: 0.2-0.25Mpa(2-2.5kgf/cm²); 水压: 0.1-0.25Mpa; 灯泡的电压: ≥25000lx; 灯泡的电压: 3.0-3.2V; 爆破适用: φ1.59mm-φ1.60mm; Noise: ≤68dB.
Price on requestFoshan Xunteng Medical Technology Co., Ltd
Reverse-pull Headgear / Face Mask (rod type)
The reverse-pull headgear (face mask) is used by orthodontists as an auxiliary device when correcting the human dentition, and is available in adjustable and rod types. It consists of a chin cup, a forehead pad and metal connectors, with a product size of 225 x 88 mm. Metal parts are made of austenitic stainless steel 12Cr18Ni9 and plastic parts of ABS; the traction hook must withstand a pull of no less than 10 N with the screw tightened. Traction force is generally 500-1000 g and can be adjusted to the patient age and tolerance; shelf life and warranty are both 36 months.
Price on requestHangzhou ALS DentalAppliance Co., Ltd
UC-01 Ultrasonic Cleaner
The UC-01 ultrasonic cleaner has a space-saving tank design and a detachable lift-out basket that makes draining easy. It offers a high-definition screen, touch keys, an innovative drain valve for smooth operation and complete emptying, and overheat protection against sustained overload. Rated 110V/230V with a 3-litre capacity, a 250×174×78 mm basin, 170W of power, a 35,000 Hz ultrasonic frequency and a net weight of 5.1kg.
Price on requestNINGBOYOUJOY DENTALEQUIPENT