Products

RAY98(W)

CW-PA Nickel-Chromium Alloy for Porcelain-Veneered Crowns and Bridges

Composition Nickel, chromium, molybdenum and silicon with minor noble-metal additions; beryllium-free, vacuum-melted and refined. Indications Type 0–3 porcelain-veneered and metal crowns and bridges. Key features 1. Beryllium- and cadmium-free: good corrosion and tarnish resistance, and no beryllium dust exposure for technicians. 2. Biocompatibility tested by a laboratory recognised by NMPA. 3. A proprietary formulation gives stable, reliable metal-ceramic bonding with a wide range of porcelains. 4. Moderate strength and hardness with good ductility — easy to grind, and long-span bridges resist deformation. 5. Vacuum melting and refining greatly reduce gas bubbles and porcelain cracking during firing.

KND/CW-NP Nickel-Chromium Alloy for Porcelain-Veneered Crowns and Bridges

Composition Nickel, chromium, molybdenum and silicon with minor noble-metal additions; beryllium-free, vacuum-melted and refined. Indications Type 0–3 porcelain-veneered and metal crowns and bridges. Key features 1. Biocompatibility tested by a laboratory recognised by NMPA. 2. A proprietary formulation gives stable, reliable metal-ceramic bonding with a wide range of porcelains. 3. Good strength and hardness with adequate ductility — easy to grind, and long-span bridges resist deformation. 4. Vacuum melting and refining greatly reduce gas bubbles and porcelain cracking during firing.

KND/CW-KZ Cobalt-Chromium Alloy for Removable Partial Dentures

Composition Co 51.0±2%, Cr 30.0±2%, Mo 7.0±1%, Ni 10.0±1%, Si 1.1±1%, Mn ≤1.0%, C ≤1.0%; beryllium and cadmium each ≤0.02%. Indications Type 4 and 5 removable partial dentures. Key features 1. Vacuum melting and refining give high purity and a brighter polished surface. 2. High strength and hardness give clasps good spring-back, easy seating and removal. 3. Appropriate ductility keeps clasps adjustable without breaking. 4. Balanced chemistry gives good casting fluidity.

Ceramics and Sealing Components

Inorganic non-metallic ceramic materials and sealing components for dental and industrial applications, including metal-ceramic sealed assemblies. Note Specific grades, parameters and specifications are not published on the manufacturer's website — please contact the supplier.

KND/CW-H Cobalt-Chromium Framework Alloy

Composition Cobalt, chromium, molybdenum and silicon with minor noble-metal additions; nickel-free, vacuum-melted and refined. Indications Hard casting alloy for Type 4 and 5 removable partial denture frameworks. Key features 1. Vacuum melting and refining give excellent biocompatibility. 2. High strength, hardness and elastic modulus produce rigid frameworks and clasps with strong spring-back — known as "high-elastic steel". 3. Appropriate ductility prevents clasps from breaking during adjustment. 4. Stable, reliable casting behaviour for high-frequency or torch melting. 5. Good chemistry for electrolytic polishing.

Bench Turbine Unit XTH204

The XTH204 is a bench turbine (air supply) unit listed with 0.5 MPa working pressure, 0.6 MPa maximum pressure, 72 L/min flow, 0.22-0.32 MPa for high-speed handpieces, 40-45 dB noise and 51×36×43 cm dimensions.The official page lists the following specifications: Air pressure: 0.5 Mpa; Max pressure: 0.6 Mpa; Flow: ;72L/min; High-speed handpiece pressure: 0.22 Mpa; High-speed handpiece pressure: 0.22Mpa 0.32 Mpa; Noise: 40-45dB; Dimensions: 51 x 36 x 43cm; 总重量: 25KG.

Dental Teaching Training Head Model JG-C9

The JG-C9 dental teaching head model is fitted with an adjustable stainless steel slide rail; once the rail is fixed to the workbench, the head model can be adjusted through several heights and rotated 180 degrees laterally. The high-end design is both practical and good looking, and it is used to set head-model posture during dental teaching and training.

Progressive Multi-Taper NiTi Rotary File System (Plus)

The progressive multi-taper NiTi file system comprises SX, S1, S2, F1, F2 and F3 sizes with 02-09% tapers, #18-#30 diameters, 250-350 rpm speeds, 1.0-3.0 N.cm torque and lengths of 19 mm or 21/25 mm. Please refer to the official product page and the manufacturer for the complete specification list.

DGF-M Stainless Steel Sealing Machine

This sealing machine is designed specifically for sealing sterilization pouches in the disinfection room and is intended for medical institutions, laboratories, beauty salons and similar settings. The new design provides double-insurance insulated sealing, convenient operation and firm seals, with a sharp cutting blade and a stable structure. Specifications include 100 W power, a maximum sealing width of 300 mm, a 12 mm impression width, a body measuring 460 x 358 x 165 mm, and a gross weight of 7 kg against a net weight of 6 kg.

Polishing Contra-Angle DW-PG

The DW-PG polishing contra-angle is used for tooth-surface polishing with external water spray and a rotary chuck; the page lists 1:1 direct drive, 25,000 rpm, noise ≤68 dB, 0.3-0.35 MPa air pressure and Φ2.34-2.35 mm burs, with 2-hole or 4-hole motor connection and forward/reverse rotation.The official page lists the following specifications: Spray: 外部喷水; Chuck type: 旋转式; Speed: 25,000Rpm/mins; Speed ratio: 1:1 直接驱动; Noise: ≤68dB; Air pressure: 0.3(Mpa)-0.35(Mpa); Applicable bur: Φ2.34-Φ2.35mm; Connection: 2孔/4孔.

BES-18L/23L-N-LED Steam Sterilizer

The BES-18L/23L-N-LED steam sterilizer offers 18 L and 23 L chambers rated at 230 V/50 Hz and 1,800 W, with chamber sizes of 249 x 350 mm and 249 x 450 mm and overall dimensions of 580 x 460 x 450 mm. It has touch keys, a fast USB port and a large water tank: 7 litres of capacity, an open tank that is easy to clean, and a built-in water-quality sensor that reduces fault rates and extends service life. At 100 cycles the B&D and leak lamps begin to flash as a reminder of the automatic cleaning program for the steam generator and piping; holding the select button for five seconds makes both lamps flash, and pressing start then launches the cleaning cycle.

XTG64-M4-T1

XTG64-M4-T1 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; Noise: ≤68dB.

Gusrom SHT ML Multilayer zirconia blocks-for Complex Restorations

Gusrom SHT ML Multilayer zirconia block is a dental digital solution for comprehensive restorations. Work with SHT ML zirconia blocks, it brings ease to create complex prostheses, such as veneer, onlay, anterior crown, posterior crown and full crown bridge. The bending strength of SHT ML zirconia block is over 900 MPa, which is durable for daily using. 6-layers colors with gradient mimicking real teeth makes SHT ML restorations more natural.

DGT-X Series Bottom-Opening Pre-Vacuum Table-Top Sterilizer (DGT-18X/DGT-23X)

The DGT-X series is a bottom-opening pre-vacuum table-top sterilizer available in 18 L and 23 L chambers. It follows the European Class B standard with triple pre-vacuum pulses and features a 4.3-inch full-colour LED display plus an electronic safety door interlock, while the bottom pull-open door design eases loading and unloading. A microprocessor runs the whole cycle automatically with automatic fault detection, and a high-altitude adaptive system performs barometric calibration. Nine preset programs, three test programs and a standard test port are included, the machine is covered by comprehensive automatic protection, and a built-in high-efficiency independent steam generator, built-in printer and USB function are provided, with water-quality testing optional.