Products

Tweed Angel Arch Bending 0.65mm 12.5cm

Main use: bending to form archwire torque, usually used in pairs. ● 0.30 mm to 0.71 mm (.012" to .028") ■ Max. 0.56 mm x 0.71 mm (.022" x .028")

Tweed Loop Farming Piler

Main use: bending small circular loops of fixed diameter in multi-loop square archwire. ● 0.36 mm to 0.64 mm (.014" to .025") ■ Max. 0.53 mm x 0.64 mm (.021" x .025")

Plaster Spatula (wooden handle)

Plaster spatula (wooden handle), one of the main products of Shanghai Rongxiang Dental Materials Co., Ltd.

Dental Modelling Wax

Dental modelling wax is produced from imported raw materials; it is moderately flexible, highly plastic and free of odour. The regular grade is used to make wax patterns for denture bases and is suited to working temperatures of 10 to 20 degrees C; the summer grade serves the same purpose at 20 to 35 degrees C. Both grades are supplied in 250 g (1.3) and 500 g (2.0) packs.

Multilayer Synthetic Resin Teeth (New Base)

New Base two-layer synthetic resin teeth bond firmly to denture base resin. They are made from high molecular weight polymethacrylate resin, have a stable and lifelike shade and good biological safety, and their distinctive cross-linked structure makes the tooth body dense, hard and wear resistant. They are used for full or partial dentures. Upper anteriors T1 to T10, S1, S2, S4 and S6 and O1, O2, O6 and O8; lower anteriors L25 to L68; posteriors M32, M34 and S28-S34; VITA 16 shades; packed 28x3, 6x1, 8x1 and loose teeth.

Denture Base Resin Type I (Heat-Curing)

Denture base resin type I (heat-curing) is made from higher-grade raw materials. The powder consists mainly of polymethyl methacrylate with a high and narrow molecular weight distribution and small, uniform particles; the liquid uses high-quality methyl methacrylate, antioxidants and similar raw materials. On performance, the finished denture base shows strong physical and chemical properties: relatively high strength, high wear resistance, easy polishing and a low tendency to form bubbles. Micron-scale particles and high molecular weight give the restoration a network cross-linked structure. A range of base shades covers patients with different gingival colours, and the working procedure is simple and convenient. On biological safety, the product uses internationally certified safe pigments and vein fibres (biomimetic shade) that are evenly distributed in the restoration. It is used to make full or partial denture bases. Shades: biomimetic 0#, 2# and 3#, biomimetic transparent 0#, 2# and 3#; powder 100 g, 1 kg and 25 kg, liquid 100 ml, 500 ml and 20 kg.

Multi-Purpose Composite Plugger #1 Silicone handle

Main use: an instrument for delivering, condensing and shaping dental restorative material to complete cavity filling and restore tooth form. Its working ends are usually made in different shapes to suit the different steps of delivery, packing, carving and polishing.

Tooth Resin Type I (Heat-Curing)

Tooth resin type I (heat-curing) consists of high-performance polymethyl methacrylate (PMMA), an initiator and a small amount of pigment. It is used together with the liquid of denture base resin type I and cured by heat. The result is a lifelike shade with high strength and good impact resistance. It is used for making dentures. Shades 0#, 2# and 3#; packed 100 g, 1 kg and 25 kg per bottle.

Coloured Self-Curing Resin Kit

The coloured self-curing resin kit has high strength, good toughness and is easy to polish. Its colours are even and soft, highly stable and resistant to discolouration. Powder and liquid penetrate each other well, which makes the material simple to handle. Its ultra-high molecular structure keeps shrinkage low, and the high-quality raw materials mean bubbles and other impurities are unlikely. Any two colours can be mixed to create a completely new shade. It is used to make various functional appliances and orthodontic retainers. Colours: clear, red, blue, yellow and green. Kit specification: five 100 g powder bottles plus three 100 ml liquid bottles; single-colour refills come as 1 kg powder.

Barrier Envelopes with Secured Seal Tab, Gray, Sizes #0-#4

The secure seal tab lets the user slide the plate into the envelope; when the tab is peeled off the bag virtually seals itself. The envelope can then be torn open and the plate fed into the reader without ever being touched. Sizes 0 to 4 are listed, fitting sensors of 22mm x 35mm, 24mm x 40mm, 31mm x 41mm, 27mm x 54mm and 57mm x 76mm respectively, under item codes #PPBE00HG, #PPBE01 H G, #PPBE02 H G, #PPBE03 H G and #PPBE04 H G, plus a #PPBE02 H G-300 box of 300. Standard boxes hold 100 pieces, while sizes #3 and #4 are packed 50 per box.

Sedga Dental Implant System

The Sedga implant system combines a two-stage ultra-narrow design with ultra-short implant designs. The body is made of cold-worked grade 4 pure titanium, which the manufacturer states has a tensile strength above 700 MPa, 27 per cent higher than conventional pure titanium, and biocompatibility tested to the full ISO 10993-1 series. The surface is a super-clean large-grit sandblasted and acid-etched SLA treatment that produces a honeycomb multi-level structure with 20 to 60 micron primary pores and 2 to 6 micron secondary pores. The body is root-analogous with wide threads and a self-tapping design, and an external insertion groove allows safe placement of ultra-short implants. The abutment connection uses a true Morse taper seal with a half angle of 1.5 degrees or less, supplemented by a central screw.

Cotton Tipped Applicators CA-003 / CA-006, Non-Sterile Wooden Shaft

Cotton tipped applicators are supplied non-sterile and are made with all wood dowels. The bud is very tightly wound from 100% cotton, which minimises linting and prevents shredding. Each applicator comes sealed in an autoclavable bag with an indicator. Two lengths are listed: #CA-003 at 3 inches and #CA-006 at 6 inches, packed 100 pieces per bag.

STE5L

Touch Key 1) full screen touch, stylish design 2) Easy and fast operation Touch Screen 1)Touchable screen makes it easy for operation. 2)User- friendly operation interface with elegantdesign. Sterilizable Instruments Dual heating system, Multi temperature contkoMak-ing the precess more effcient than ever before. Two Ways Of Recording Double Lock System -Mechanical Lock with Air Lock System Six Layers Of New Structure Pot Body To Creat New Experiences. 1) The pot body adopts a six-layer structure, one-time fine drawing forming, powder spraying and polishing, which has extremely strong pressure-bearing performance, and has passed 60000 fatigue life experiments. The outer layer is wrapped with ultra-fine microporous foaming technology. 2) After the tray rack is rotated 90 °, 5 trays are used to separate the sterilized items

LUB-120

Xteady Lite Dental Implant System

The Xteady Lite dental implant system uses a four-in-one thread design with a conical body, a self-tapping structure, a micro-thread at the top and a carrier-free lightweight design that the manufacturer describes as enabling immediate implantation. The published sizes are 3.5 x 8, 3.5 x 10, 3.5 x 12, 3.8 x 8, 3.8 x 10, 3.8 x 12, 4.3 x 8, 4.3 x 10, 4.3 x 12, 5.0 x 8 and 5.0 x 10 mm, eleven sizes in total.