Products

Evo 3D Facial Scanner

The Evo scanner uses combined white and blue structured light with a working distance of 40 to 50 cm, 3D facial scanning accuracy of plus or minus 0.1 mm and deviation of plus or minus 0.3 mm in each direction, a 0.5 second capture and a scan range of 200 x 300 mm, exporting STL, OBJ, PLY and XML files. Recommended configuration is Windows 10 or later, an Intel Core i5-10500H or better processor (i7-10800H recommended), an NVIDIA GTX 2060 or better graphics card (RTX 3070 with 4 GB or more recommended), 8 GB of memory or more (16 GB recommended), 1920 x 1080 resolution and a USB 3.0 or 1 Gbps LAN port.

SUPER05 Dental Diagnostic X-ray Unit

The SUPER05 dental diagnostic X-ray unit has a tube voltage of 70kV ±10% and tube current of 2mA ±20%, accepts 100-240V input at 50-60Hz, and uses a Canon (Toshiba) X-ray tube with a 12.5° anode angle and 0.4mm focal spot. Exposure times range from 0.04s to 2.0s, leakage radiation is 0.25mGy/h at one metre, and the unit weighs 1.9kg.

Full-shade Detector

The full-shade detector uses multiple algorithms and can take more than 2,000 measurements on a full charge. Its built-in rechargeable lithium battery reaches 4.2V when full with a 1500mAh capacity, charges through a TYPE-C port at DC-5V and 1A, and is rated for more than 5,000 charging cycles.

10:1 Push-Button Reciprocating Contra-Angle XTDW321

The XTDW321 is a 10:1 push-button reciprocating contra-angle, listed in the official parameter table as a 10:1 push-button left-right reciprocating contra-angle. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Bench Water Turbine XTH202-1

The XTH202-1 is a bench water turbine unit listed with 0.2-0.4 MPa water supply pressure for dental equipment water supply.The official page lists the following specifications: Water supply pressure: 0.2-0.4Mpa; 可与牙科用手机连接：: l 1支高速手机; 或1支低速手机: l 吸痰器的管子.

Mobile Cart 2

XTG221-M4/B2

XTG221-M4/B2 is a WBX dental handpiece model; its official page only lists the parameters below and does not state a specific handpiece type or indication.The official page lists the following specifications: Working air pressure: 0.2-0.25Mpa(2.0-2.5kgf/cm²); Speed ratio: ≥300,000rpm; 适用范围: φ1.59mm-φ1.60mm; 噪sheng: ≤68dB.

iPD Lingchi Intelligent Removable Framework Design Software

iPD Lingchi is an intelligent design software for removable partial denture frameworks, presented as making framework design faster, more varied and simpler. It was developed by Nanjing Profeta together with the Peking University School of Stomatology and is described as the first domestically developed framework design software of its kind. Based on artificial intelligence, it provides a doctor assistant that recommends several design options and enables digital tooth arrangement, processing and printing. A texture scanning and drawing function supports textured models and is described as helping laboratories move framework work from manual wax patterns to digital design. Team collaboration runs on SaaS cloud services with group management for remote and cross-region work, and design quality is kept stable under experienced senior technicians.

FX External-Water Air Motor (4-Hole / 2-Hole)

The FX external-water air motor is a low-speed dental air motor in the FX external-water series, available with 4-hole and 2-hole connections.The official page lists the following specifications: Spray: 外喷水; Chuck type: 旋转式; Speed: 25,000Rpm/mins; Speed ratio: 1:1 直接驱动; Noise: ≤68dB; Air pressure: 0.25(Mpa)-0.3(Mpa); 适用毛刺: Φ2.34-Φ2.35mm; Connection: 2孔/4孔. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

MAX Standard Push-Button Quick-Coupling Handpiece

The MAX standard push-button quick-coupling handpiece is a quick-coupling dental high-speed handpiece with a universal NSK-compatible quick coupling, as stated on the official page. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

Ni-Ti Super Elastic Round Arch Wire (0.012"-0.020")

Ni-Ti super elastic round arch wire is used for alignment and leveling in the early stage of orthodontic treatment. Arch form types are ovoid, natural and square. Sizes in inches are 0.012, 0.014, 0.016, 0.018 and 0.020, supplied in upper (U) and lower (L) arch forms.

1:5 Fiber-Optic Inner-Channel Contra-Angle LDNP15

The LDNP15 1:5 fiber-optic inner-channel contra-angle is a speed-increasing handpiece with inner-channel four-hole water spray and push-button chuck, 0.3 MPa driving pressure and compatibility with air or electric motors; an external-water version of the fiber-optic contra-angle is also listed.

Mega+ Custom Implant Abutment

Mega+ custom implant abutments provide an individualized service built around emergence profile, restorative space and suprastructure design in implant restorations. Abutment design must consider the implant system, soft tissue conditions, restorative space and clinical plan, and fabrication should be based on complete data reviewed by a qualified professional. The supported implant systems, data requirements, design confirmation and delivery process are available from the Mega+ team; no numeric specifications are published on the page.

MAX-1 Standard Handpiece (Push-Button / Latch)

The MAX-1 standard handpiece is a dental high-speed handpiece with single-point water spray, anti-retraction design and standard head, 4-hole/2-hole connections and NSK compatibility, available with push-button or latch chuck. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.

XB Large-Head Push-Button Handpiece

The XB large-head push-button handpiece is a large-head dental high-speed handpiece with self-illuminating light, available with 4-hole and 2-hole connections in the standard high-speed series and compatible with NSK connections. The official page for this model only provides the brief description above without complete technical parameters or indications, so detailed specifications should be confirmed with the manufacturer.